USB Hard Drive Not Accessible, vol_id hangs
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
Linux |
Fix Released
|
Medium
|
|||
linux (Ubuntu) |
Fix Released
|
High
|
Unassigned | ||
Intrepid |
Invalid
|
High
|
Unassigned |
Bug Description
I updated to 2.6.27-2 today, and one of my hard drives is no longer recognized. It is in a Vantec NexStar GX enclosure, and was working fine on .26, and continues to work fine on a Hardy machine. Here is the dmesg for it:
[ 6722.944029] usb 5-5: new high speed USB device using ehci_hcd and address 27
[ 6723.077863] usb 5-5: configuration #1 chosen from 1 choice
[ 6723.079511] hub 5-5:1.0: USB hub found
[ 6723.080345] hub 5-5:1.0: 4 ports detected
[ 6732.712034] usb 5-5: reset high speed USB device using ehci_hcd and address 27
[ 6733.124011] usb 5-5.1: new high speed USB device using ehci_hcd and address 28
[ 6733.364598] usb 5-5.1: configuration #1 chosen from 1 choice
[ 6733.365180] scsi17 : SCSI emulation for USB Mass Storage devices
[ 6733.365818] usb-storage: device found at 28
[ 6733.365830] usb-storage: waiting for device to settle before scanning
[ 6738.364276] usb-storage: device scan complete
[ 6738.361002] scsi 17:0:0:0: Direct-Access ST340063 2A 3.04 PQ: 0 ANSI: 0
[ 6738.361002] sd 17:0:0:0: [sdm] 781422769 512-byte hardware sectors (400088 MB)
[ 6738.361002] sd 17:0:0:0: [sdm] Write Protect is off
[ 6738.361002] sd 17:0:0:0: [sdm] Mode Sense: 03 00 00 00
[ 6738.361002] sd 17:0:0:0: [sdm] Assuming drive cache: write through
[ 6738.361002] sd 17:0:0:0: [sdm] 781422769 512-byte hardware sectors (400088 MB)
[ 6738.370354] sd 17:0:0:0: [sdm] Write Protect is off
[ 6738.370362] sd 17:0:0:0: [sdm] Mode Sense: 03 00 00 00
[ 6738.370365] sd 17:0:0:0: [sdm] Assuming drive cache: write through
[ 6738.371516] sdm: sdm1
[ 6738.418089] sd 17:0:0:0: [sdm] Attached SCSI disk
[ 6738.418995] sd 17:0:0:0: Attached scsi generic sg8 type 0
[ 6738.656598] sd 17:0:0:0: [sdm] Sense Key : No Sense [current]
[ 6738.656614] sd 17:0:0:0: [sdm] Add. Sense: No additional sense information
From there, the last 2 lines about Sense Key and Add Sense repeat over and over again.
The 4 port hub that is a part of the enclosure continues to work fine though, with a floppy drive, a printer, and another hard drive. I have a Vantec NexStar 3 enclosure as well, and it is working just fine. Dmesg for the working enclosure:
[ 4281.996024] usb 5-3: new high speed USB device using ehci_hcd and address 19
[ 4282.131863] usb 5-3: configuration #1 chosen from 1 choice
[ 4282.133222] scsi12 : SCSI emulation for USB Mass Storage devices
[ 4282.133561] usb-storage: device found at 19
[ 4282.133566] usb-storage: waiting for device to settle before scanning
[ 4287.132002] usb-storage: device scan complete
[ 4287.136004] scsi 12:0:0:0: Direct-Access ST375064 0AS PQ: 0 ANSI: 2
[ 4287.138368] sd 12:0:0:0: [sdi] 1465149168 512-byte hardware sectors (750156 MB)
[ 4287.144790] sd 12:0:0:0: [sdi] Write Protect is off
[ 4287.144800] sd 12:0:0:0: [sdi] Mode Sense: 38 00 00 00
[ 4287.144804] sd 12:0:0:0: [sdi] Assuming drive cache: write through
[ 4287.152388] sd 12:0:0:0: [sdi] 1465149168 512-byte hardware sectors (750156 MB)
[ 4287.154966] sd 12:0:0:0: [sdi] Write Protect is off
[ 4287.154975] sd 12:0:0:0: [sdi] Mode Sense: 38 00 00 00
[ 4287.154979] sd 12:0:0:0: [sdi] Assuming drive cache: write through
[ 4287.154988] sdi: sdi1
[ 4287.176965] sd 12:0:0:0: [sdi] Attached SCSI disk
[ 4287.177173] sd 12:0:0:0: Attached scsi generic sg7 type 0
[ 4289.129138] kjournald starting. Commit interval 5 seconds
[ 4289.130101] EXT3 FS on sdi1, internal journal
[ 4289.130110] EXT3-fs: mounted filesystem with ordered data mode.
Changed in linux: | |
assignee: | nobody → ubuntu-kernel-team |
importance: | Undecided → High |
status: | New → Triaged |
Changed in linux: | |
status: | Unknown → Confirmed |
Changed in linux: | |
status: | Confirmed → Fix Released |
Changed in linux: | |
importance: | Undecided → High |
status: | New → Fix Committed |
Changed in linux: | |
status: | Triaged → Fix Released |
Changed in linux: | |
importance: | Unknown → Medium |
I updated to 2.6.27-2 yesterday and one of my hard drives is no longer recognized.( 80 gig usb ext3) and continues to work fine on a Hardy machine. Here is the dmesg for it:
[82993.163288] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.164412] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.164423] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.165657] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.165668] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.166904] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.166914] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.168050] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.168061] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.169166] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.169178] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.170408] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.170420] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.171654] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.171664] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.172904] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.172915] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.174151] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.174161] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.175282] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.175293] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.176409] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.176421] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.177659] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.177669] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.178778] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.178788] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.179900] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.179909] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.181157] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.181168] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.182279] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.182289] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.183410] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.183421] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.184539] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.184549] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.185786] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.185796] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.187032] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.187042] sd 6:0:0:0: [sdd] Add. Sense: No additional sense information
[82993.188165] sd 6:0:0:0: [sdd] Sense Key : No Sense [current]
[82993.188176] sd 6:0:0:0: [sdd] Add. Sense:...