Cd audio unreadable with Optiarc DVD RW

[helios91940]

I have a Optiarc DVD RW AD-5200A and I can't read audio cds. Ubuntu recognizes it as a blank cd and propose me to burn it. I try to launch it on vlc or totem but it doesn't work. Moreover, I tried to upgrade the firmware downloaded from the manufacturer web site but it doesn't change anything.
I test it with a lot of cds audio. Other kinds of cd work properly. Some users have the same problem http://forum.ubuntu-fr.org/viewtopic.php?id=186510
Actually, I don't know if it's an hardware or a software problem.

* dmesg
[ 0.660000] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.660000] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.664000] Time: hpet clocksource has been installed.
[ 0.664000] Switched to high resolution mode on CPU 0
[ 0.664000] Switched to high resolution mode on CPU 1
[ 0.692000] PCI: Bridge: 0000:00:04.0
[ 0.692000] IO window: b000-bfff
[ 0.692000] MEM window: disabled.
[ 0.692000] PREFETCH window: disabled.
[ 0.692000] PCI: Bridge: 0000:00:09.0
[ 0.692000] IO window: disabled.
[ 0.692000] MEM window: f2000000-f4ffffff
[ 0.692000] PREFETCH window: e0000000-efffffff
[ 0.692000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.692000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.692000] NET: Registered protocol family 2
[ 0.736000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.736000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 0.736000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.736000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.736000] TCP reno registered
[ 0.752000] checking if image is initramfs... it is
[ 1.304000] Freeing initrd memory: 7062k freed
[ 1.308000] audit: initializing netlink socket (disabled)
[ 1.308000] audit(1201587677.164:1): initialized
[ 1.308000] highmem bounce pool size: 64 pages
[ 1.308000] VFS: Disk quotas dquot_6.5.1
[ 1.308000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.308000] io scheduler noop registered
[ 1.308000] io scheduler anticipatory registered
[ 1.308000] io scheduler deadline registered
[ 1.308000] io scheduler cfq registered (default)
[ 1.308000] Boot video device is 0000:02:00.0
[ 1.308000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 1.308000] assign_interrupt_mode Found MSI capability
[ 1.308000] Allocate Port Service[0000:00:09.0:pcie00]
[ 1.308000] isapnp: Scanning for PnP cards...
[ 1.660000] isapnp: No Plug & Play device found
[ 1.684000] Real Time Clock Driver v1.12ac
[ 1.684000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.684000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.684000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.684000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.684000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.684000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.684000] input: Macintosh mouse button emulation as /class/input/input0
[ 1.684000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.684000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 1.688000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.688000] mice: PS/2 mouse device common for all mice
[ 1.688000] EISA: Probing bus 0 at eisa.0
[ 1.688000] Cannot allocate resource for EISA slot 1
[ 1.688000] EISA: Detected 0 cards.
[ 1.688000] TCP cubic registered
[ 1.688000] NET: Registered protocol family 1
[ 1.688000] Using IPI No-Shortcut mode
[ 1.688000] Magic number: 8:604:368
[ 1.688000] Freeing unused kernel memory: 364k freed
[ 1.720000] input: AT Translated Set 2 keyboard as /class/input/input1
[ 3.080000] AppArmor: AppArmor initialized<5>audit(1201587678.664:2): type=1505 info="AppArmor initialized" pid=1240
[ 3.096000] fuse init (API version 7.8)
[ 3.104000] Failure registering capabilities with primary security module.
[ 4.280000] usbcore: registered new interface driver usbfs
[ 4.280000] usbcore: registered new interface driver hub
[ 4.280000] usbcore: registered new device driver usb
[ 4.280000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.280000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 4.280000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
[ 4.280000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 4.280000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 4.280000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 4.280000] ohci_hcd 0000:00:02.0: irq 16, io mem 0xf5007000
[ 4.340000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 4.340000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.348000] usb usb1: configuration #1 chosen from 1 choice
[ 4.348000] hub 1-0:1.0: USB hub found
[ 4.348000] hub 1-0:1.0: 10 ports detected
[ 4.364000] SCSI subsystem initialized
[ 4.368000] libata version 2.21 loaded.
[ 4.452000] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
[ 4.452000] NFORCE-MCP61: chipset revision 162
[ 4.452000] NFORCE-MCP61: not 100% native mode: will probe irqs later
[ 4.452000] NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling workaround.
[ 4.452000] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[ 4.452000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 4.452000] Probing IDE interface ide0...
[ 4.464000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 4.756000] usb 1-4: new low speed USB device using ohci_hcd and address 2
[ 4.960000] usb 1-4: configuration #1 chosen from 1 choice
[ 4.980000] usbcore: registered new interface driver hiddev
[ 4.984000] input: HID 1241:1111 as /class/input/input2
[ 4.984000] input: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:00:02.0-4
[ 4.984000] usbcore: registered new interface driver usbhid
[ 4.984000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 5.188000] hda: Optiarc DVD RW AD-5200A, ATAPI CD/DVD-ROM drive
[ 5.860000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.860000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 5.860000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
[ 5.860000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 5.860000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 5.860000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 5.860000] ehci_hcd 0000:00:02.1: debug port 1
[ 5.860000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 5.860000] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf5006000
[ 5.860000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.860000] usb 1-4: USB disconnect, address 2
[ 5.864000] usb usb2: configuration #1 chosen from 1 choice
[ 5.864000] hub 2-0:1.0: USB hub found
[ 5.864000] hub 2-0:1.0: 10 ports detected
[ 5.968000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 5.968000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18
[ 5.968000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 5.968000] forcedeth: using HIGHDMA
[ 5.980000] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 974kB Cache, UDMA(66)
[ 5.980000] Uniform CD-ROM driver Revision: 3.20
[ 6.476000] usb 1-4: new low speed USB device using ohci_hcd and address 3
[ 6.488000] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:07.0
[ 6.488000] sata_nv 0000:00:08.0: version 3.4
[ 6.488000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 6.488000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19
[ 6.488000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 6.488000] scsi0 : sata_nv
[ 6.492000] scsi1 : sata_nv
[ 6.492000] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 19
[ 6.492000] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 19
[ 6.680000] usb 1-4: configuration #1 chosen from 1 choice
[ 6.696000] input: HID 1241:1111 as /class/input/input3
[ 6.696000] input: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:00:02.0-4
[ 6.960000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.004000] ata1.00: Host Protected Area detected:
[ 7.004000] current size: 156299375 sectors
[ 7.004000] native size: 156301488 sectors
[ 7.132000] ata1.00: native size increased to 156301488 sectors
[ 7.132000] ata1.00: ATA-7: MAXTOR STM380815AS, 3.AAD, max UDMA/133
[ 7.132000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 7.196000] ata1.00: configured for UDMA/133
[ 7.508000] ata2: SATA link down (SStatus 0 SControl 300)
[ 7.516000] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380815 3.AA PQ: 0 ANSI: 5
[ 7.528000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 7.528000] sd 0:0:0:0: [sda] Write Protect is off
[ 7.528000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.528000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.528000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 7.528000] sd 0:0:0:0: [sda] Write Protect is off
[ 7.528000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.528000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.528000] sda: sda1 sda2 < sda5 >
[ 7.580000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.588000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.968000] Attempting manual resume
[ 7.968000] swsusp: Resume From Partition 8:5
[ 7.968000] PM: Checking swsusp image.
[ 7.968000] PM: Resume from disk failed.
[ 8.032000] kjournald starting. Commit interval 5 seconds
[ 8.032000] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.508000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.588000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.604000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 17.604000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xc800
[ 17.732000] input: PC Speaker as /class/input/input4
[ 17.884000] parport_pc 00:09: reported by Plug and Play ACPI
[ 17.884000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 17.896000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.928000] nvidia: module license 'NVIDIA' taints kernel.
[ 18.184000] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 18.184000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 20
[ 18.184000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 18.184000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 18.332000] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 18.332000] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 16
[ 18.332000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 18.868000] lp0: using parport0 (interrupt-driven).
[ 19.012000] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k
[ 19.024000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 19.028000] EXT3 FS on sda1, internal journal
[ 20.296000] No dock devices found.
[ 20.496000] input: Power Button (FF) as /class/input/input5
[ 20.496000] ACPI: Power Button (FF) [PWRF]
[ 20.496000] input: Power Button (CM) as /class/input/input6
[ 20.496000] ACPI: Power Button (CM) [PWRB]
[ 20.796000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (version 2.00.00)
[ 20.796000] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xa
[ 20.796000] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xb
[ 20.796000] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xd
[ 20.796000] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 21.876000] ppdev: user-space parallel port driver
[ 22.036000] audit(1201587697.948:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4957 profile="/usr/sbin/cupsd"
[ 22.328000] Failure registering capabilities with primary security module.
[ 22.352000] NET: Registered protocol family 10
[ 22.352000] lo: Disabled Privacy Extensions
[ 24.004000] Clocksource tsc unstable (delta = -264004828 ns)
[ 26.768000] NET: Registered protocol family 17
[ 38.624000] eth0: no IPv6 routers present
[ 506.308000] cdrom: This disc doesn't have any tracks I recognize!
[ 506.328000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.328000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.328000] ide: failed opcode was: unknown
[ 506.328000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.328000] end_request: I/O error, dev hda, sector 0
[ 506.332000] Buffer I/O error on device hda, logical block 0
[ 506.332000] Buffer I/O error on device hda, logical block 1
[ 506.332000] Buffer I/O error on device hda, logical block 2
[ 506.332000] Buffer I/O error on device hda, logical block 3
[ 506.332000] Buffer I/O error on device hda, logical block 4
[ 506.332000] Buffer I/O error on device hda, logical block 5
[ 506.332000] Buffer I/O error on device hda, logical block 6
[ 506.332000] Buffer I/O error on device hda, logical block 7
[ 506.332000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.332000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.332000] ide: failed opcode was: unknown
[ 506.332000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.332000] end_request: I/O error, dev hda, sector 0
[ 506.332000] Buffer I/O error on device hda, logical block 0
[ 506.332000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.332000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.332000] ide: failed opcode was: unknown
[ 506.336000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.336000] end_request: I/O error, dev hda, sector 4
[ 506.336000] Buffer I/O error on device hda, logical block 1
[ 506.336000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.336000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.336000] ide: failed opcode was: unknown
[ 506.336000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.336000] end_request: I/O error, dev hda, sector 32
[ 506.336000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.336000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.336000] ide: failed opcode was: unknown
[ 506.340000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.340000] end_request: I/O error, dev hda, sector 0
[ 506.340000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.340000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.340000] ide: failed opcode was: unknown
[ 506.340000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.340000] end_request: I/O error, dev hda, sector 36
[ 506.340000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.340000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.340000] ide: failed opcode was: unknown
[ 506.340000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.340000] end_request: I/O error, dev hda, sector 0
[ 506.344000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.344000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.344000] ide: failed opcode was: unknown
[ 506.344000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.344000] end_request: I/O error, dev hda, sector 0
[ 506.344000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.344000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.344000] ide: failed opcode was: unknown
[ 506.344000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.344000] end_request: I/O error, dev hda, sector 4
[ 506.348000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.348000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.348000] ide: failed opcode was: unknown
[ 506.348000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.348000] end_request: I/O error, dev hda, sector 0
[ 506.348000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.348000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.348000] ide: failed opcode was: unknown
[ 506.348000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.348000] end_request: I/O error, dev hda, sector 4
[ 506.352000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.352000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.352000] ide: failed opcode was: unknown
[ 506.352000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.352000] end_request: I/O error, dev hda, sector 0
[ 506.352000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.352000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.352000] ide: failed opcode was: unknown
[ 506.352000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.352000] end_request: I/O error, dev hda, sector 4
[ 506.356000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.356000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.356000] ide: failed opcode was: unknown
[ 506.356000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.356000] end_request: I/O error, dev hda, sector 0
[ 506.356000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.356000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.356000] ide: failed opcode was: unknown
[ 506.356000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.356000] end_request: I/O error, dev hda, sector 4
[ 506.356000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.356000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.356000] ide: failed opcode was: unknown
[ 506.360000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.360000] end_request: I/O error, dev hda, sector 0
[ 506.360000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.360000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.360000] ide: failed opcode was: unknown
[ 506.360000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.360000] end_request: I/O error, dev hda, sector 4
[ 506.360000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.360000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.360000] ide: failed opcode was: unknown
[ 506.364000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.364000] end_request: I/O error, dev hda, sector 0
[ 506.364000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.364000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.364000] ide: failed opcode was: unknown
[ 506.364000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.364000] end_request: I/O error, dev hda, sector 4
[ 506.364000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.364000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.364000] ide: failed opcode was: unknown
[ 506.368000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.368000] end_request: I/O error, dev hda, sector 0
[ 506.368000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.368000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.368000] ide: failed opcode was: unknown
[ 506.368000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.368000] end_request: I/O error, dev hda, sector 4
[ 506.372000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.372000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.372000] ide: failed opcode was: unknown
[ 506.372000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.372000] end_request: I/O error, dev hda, sector 0
[ 506.372000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.372000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.372000] ide: failed opcode was: unknown
[ 506.372000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.372000] end_request: I/O error, dev hda, sector 4
[ 506.376000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.376000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.376000] ide: failed opcode was: unknown
[ 506.376000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.376000] end_request: I/O error, dev hda, sector 0
[ 506.376000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.376000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.376000] ide: failed opcode was: unknown
[ 506.376000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.376000] end_request: I/O error, dev hda, sector 4
[ 506.380000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.380000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.380000] ide: failed opcode was: unknown
[ 506.380000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.380000] end_request: I/O error, dev hda, sector 0
[ 506.380000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.380000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.380000] ide: failed opcode was: unknown
[ 506.380000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.380000] end_request: I/O error, dev hda, sector 4
[ 506.384000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.384000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.384000] ide: failed opcode was: unknown
[ 506.384000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.384000] end_request: I/O error, dev hda, sector 0
[ 506.384000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.384000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.384000] ide: failed opcode was: unknown
[ 506.384000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.384000] end_request: I/O error, dev hda, sector 4
[ 506.388000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.388000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.388000] ide: failed opcode was: unknown
[ 506.388000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.388000] end_request: I/O error, dev hda, sector 0
[ 506.388000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.388000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.388000] ide: failed opcode was: unknown
[ 506.388000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.388000] end_request: I/O error, dev hda, sector 4
[ 506.392000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.392000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.392000] ide: failed opcode was: unknown
[ 506.392000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.392000] end_request: I/O error, dev hda, sector 0
[ 506.396000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.396000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.396000] ide: failed opcode was: unknown
[ 506.396000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.396000] end_request: I/O error, dev hda, sector 4
[ 506.396000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.396000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.396000] ide: failed opcode was: unknown
[ 506.396000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.396000] end_request: I/O error, dev hda, sector 0
[ 506.396000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.396000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.396000] ide: failed opcode was: unknown
[ 506.400000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.400000] end_request: I/O error, dev hda, sector 4
[ 506.400000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.400000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.400000] ide: failed opcode was: unknown
[ 506.400000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.400000] end_request: I/O error, dev hda, sector 0
[ 506.400000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.400000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.400000] ide: failed opcode was: unknown
[ 506.404000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.404000] end_request: I/O error, dev hda, sector 4
[ 506.404000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.404000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.404000] ide: failed opcode was: unknown
[ 506.404000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.404000] end_request: I/O error, dev hda, sector 0
[ 506.404000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.404000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.404000] ide: failed opcode was: unknown
[ 506.408000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.408000] end_request: I/O error, dev hda, sector 4
[ 506.408000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.408000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.408000] ide: failed opcode was: unknown
[ 506.408000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.408000] end_request: I/O error, dev hda, sector 0
[ 506.408000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.408000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.408000] ide: failed opcode was: unknown
[ 506.412000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.412000] end_request: I/O error, dev hda, sector 4
[ 506.412000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.412000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.412000] ide: failed opcode was: unknown
[ 506.412000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.412000] end_request: I/O error, dev hda, sector 0
[ 506.412000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.412000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.412000] ide: failed opcode was: unknown
[ 506.412000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.412000] end_request: I/O error, dev hda, sector 4
[ 506.416000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.416000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.416000] ide: failed opcode was: unknown
[ 506.416000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.416000] end_request: I/O error, dev hda, sector 0
[ 506.416000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.416000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.416000] ide: failed opcode was: unknown
[ 506.416000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.416000] end_request: I/O error, dev hda, sector 4
[ 506.420000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.420000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.420000] ide: failed opcode was: unknown
[ 506.420000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.420000] end_request: I/O error, dev hda, sector 0
[ 506.420000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.420000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.420000] ide: failed opcode was: unknown
[ 506.420000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.420000] end_request: I/O error, dev hda, sector 4
[ 506.424000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.424000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.424000] ide: failed opcode was: unknown
[ 506.424000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.424000] end_request: I/O error, dev hda, sector 0
[ 506.424000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.424000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.424000] ide: failed opcode was: unknown
[ 506.424000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.424000] end_request: I/O error, dev hda, sector 4
[ 506.424000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.424000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.424000] ide: failed opcode was: unknown
[ 506.428000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.428000] end_request: I/O error, dev hda, sector 0
[ 506.428000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.428000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.428000] ide: failed opcode was: unknown
[ 506.428000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.428000] end_request: I/O error, dev hda, sector 4
[ 506.428000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.428000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.428000] ide: failed opcode was: unknown
[ 506.432000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.432000] end_request: I/O error, dev hda, sector 0
[ 506.432000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.432000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.432000] ide: failed opcode was: unknown
[ 506.432000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.432000] end_request: I/O error, dev hda, sector 4
[ 506.432000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.432000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.432000] ide: failed opcode was: unknown
[ 506.436000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.436000] end_request: I/O error, dev hda, sector 0
[ 506.436000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.436000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.436000] ide: failed opcode was: unknown
[ 506.436000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.436000] end_request: I/O error, dev hda, sector 4
[ 506.444000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.444000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.444000] ide: failed opcode was: unknown
[ 506.444000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.444000] end_request: I/O error, dev hda, sector 0
[ 506.444000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.444000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.444000] ide: failed opcode was: unknown
[ 506.448000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.448000] end_request: I/O error, dev hda, sector 4
[ 506.452000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.452000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.452000] ide: failed opcode was: unknown
[ 506.452000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.452000] end_request: I/O error, dev hda, sector 0
[ 506.452000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.452000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.452000] ide: failed opcode was: unknown
[ 506.452000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.452000] end_request: I/O error, dev hda, sector 4

*cat /proc/version_signature
Ubuntu 2.6.22-14.47-generic

*uname -a
Linux helios91-desktop 2.6.22-14-generic #1 SMP Tue Dec 18 08:02:57 UTC 2007 i686 GNU/Linux

*sudo lspci -vvnn
00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
        Subsystem: Giga-byte Technology Unknown device [1458:5001]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [44] HyperTransport: Slave or Primary Interface
                Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
                Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
                Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
                Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
                Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
                Revision ID: 1.03
                Link Frequency 0: 1.0GHz
                Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
                Link Frequency 1: 200MHz
                Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
                Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
                Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
                Prefetchable memory behind bridge Upper: 00-00
                Bus Number: 00
        Capabilities: [dc] HyperTransport: MSI Mapping

00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev a2)
        Subsystem: Giga-byte Technology Unknown device [1458:0c11]
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
        Subsystem: Giga-byte Technology Unknown device [1458:0c11]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at c000 [size=64]
        Region 4: I/O ports at 1c00 [size=64]
        Region 5: I/O ports at c800 [size=64]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
        Subsystem: Giga-byte Technology Unknown device [1458:0c11]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f1] (rev a2) (prog-if 10 [OHCI])
        Subsystem: Giga-byte Technology Unknown device [1458:5004]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 16
        Region 0: Memory at f5007000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f2] (rev a2) (prog-if 20 [EHCI])
        Subsystem: Giga-byte Technology Unknown device [1458:5004]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin B routed to IRQ 17
        Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=256]
        Capabilities: [44] Debug port
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME+

00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
        I/O behind bridge: 0000b000-0000bfff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [b8] Subsystem: Giga-byte Technology Unknown device [1458:026f]
        Capabilities: [8c] HyperTransport: MSI Mapping

00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
        Subsystem: Giga-byte Technology Unknown device [1458:a002]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (500ns min, 1250ns max)
        Interrupt: pin B routed to IRQ 16
        Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000 Data: 0000
                Masking: 00000000 Pending: 00000000
        Capabilities: [6c] HyperTransport: MSI Mapping

00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP])
        Subsystem: Giga-byte Technology Unknown device [1458:5002]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
        Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
        Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
        Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
        Region 4: I/O ports at f000 [size=16]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2)
        Subsystem: Giga-byte Technology Unknown device [1458:e000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (250ns min, 5000ns max)
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=4K]
        Region 1: I/O ports at cc00 [size=8]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable-
                Address: 0000000000000000 Data: 0000
                Masking: 00000000 Pending: 00000000
        Capabilities: [6c] HyperTransport: MSI Mapping

00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
        Subsystem: Giga-byte Technology Unknown device [1458:b002]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0 (750ns min, 250ns max)
        Interrupt: pin A routed to IRQ 19
        Region 0: I/O ports at 09f0 [size=8]
        Region 1: I/O ports at 0bf0 [size=4]
        Region 2: I/O ports at 0970 [size=8]
        Region 3: I/O ports at 0b70 [size=4]
        Region 4: I/O ports at e000 [size=16]
        Region 5: Memory at f5005000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [44] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
                Address: 0000000000000000 Data: 0000
        Capabilities: [cc] HyperTransport: MSI Mapping

00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0, Cache Line Size: 32 bytes
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        Memory behind bridge: f2000000-f4ffffff
        Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
        Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
        Capabilities: [48] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
                Address: 0000000000000000 Data: 0000
        Capabilities: [60] HyperTransport: MSI Mapping
        Capabilities: [80] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
                Link: Latency L0s <512ns, L1 <4us
                Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x8
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
                Slot: Number 1, PowerLimit 75.000000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Off, PwrInd On, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-

00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Capabilities: [80] HyperTransport: Host or Secondary Interface
                !!! Possibly incomplete decoding
                Command: WarmRst+ DblEnd-
                Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
                Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
                Revision ID: 1.02

00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-

00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Capabilities: [f0] #0f [0010]

02:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1) (prog-if 00 [VGA])
        Subsystem: ASUSTeK Computer Inc. Unknown device [1043:820b]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
        Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Region 3: Memory at f3000000 (64-bit, non-prefetchable) [size=16M]
        [virtual] Expansion ROM at f4000000 [disabled] [size=128K]
        Capabilities: [60] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                Address: 0000000000000000 Data: 0000
        Capabilities: [78] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <512ns, L1 <4us
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
                Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
                Link: Latency L0s <256ns, L1 <4us
                Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
                Link: Speed 2.5Gb/s, Width x8

[Leann Ogasawara (leannogasawara)]

Thank you for taking the time to report this bug and helping to make Ubuntu better. Per the kernel team's bug policy, can you please attach the following information. Please be sure to attach each file as a separate attachment.

* uname -a > uname-a.log
* cat /proc/version_signature > version.log
* dmesg > dmesg.log
* sudo lspci -vvnn > lspci-vvnn.log

Please be sure to capture the entire dmesg output which includes the errors you noted.

For more information regarding the kernel team bug policy, please refer to https://wiki.ubuntu.com/KernelTeamBugPolicies . Thanks again and we appreciate your help and feedback.

[helios91940 (florian-plaza)]

I have updated my message.
Thank you for your answer

[Tim Gardner (timg-tpi)]

Try booting the current Hardy Alpha. I noticed that your kernel version indicates you are running Gutsy.

[helios91940 (florian-plaza)]

Hello, I tried to use Ubuntu 8.10 Alpha 4 but it didn't solve my problem.
I've still the same message when I launch the "dmesg" command.

[Stefan Bader (smb)]

Could you also provide the output from 'cat /proc/sys/dev/cdrom/info' and maybe try to insert an audio cd after activating the debug mode of the cdrom driver (echo 1 >/proc/sys/dev/cdrom/debug). Maybe this yields more information.

[helios91940 (florian-plaza)]

Hello, the command cat /proc/sys/dev/cdrom/info indicates that it is not able to read audio cds.

cat /proc/sys/dev/cdrom/info
CD-ROM information, Id: cdrom.c 3.20 2003/12/17

drive name: hda
drive speed: 48
drive # of slots: 1
Can close tray: 1
Can open tray: 1
Can lock tray: 1
Can change speed: 1
Can select disk: 0
Can read multisession: 1
Can read MCN: 1
Reports media changed: 1
Can play audio: 0
Can write CD-R: 1
Can write CD-RW: 1
Can read DVD: 1
Can write DVD-R: 1
Can write DVD-RAM: 0
Can read MRW: 1
Can write MRW: 1
Can write RAM: 1

The command "echo 1 >/proc/sys/dev/cdrom/debug" or "sudo echo 1 >/proc/sys/dev/cdrom/debug" fails.
The answer is "permission denied"

[Stefan Bader (smb)]

The echo would work when done from a root shell (sudo -i). But if the status already shows inability to play audio cds, this probably won't show much new. I have to dig around a bit to see where this could come.

[helios91940 (florian-plaza)]

the echo command succeeded but it didn't change anything

[Stefan Bader (smb)]

Setting the debug mode would just print more information when the driver executes certain functions. This might be not the case after failure. The problem is that the drive itself seems to report the inability to play audio. Reading the driver code the seem to be some other drives that do not report correctly but work when this is ignored. I prepared a patch for testing purposes but you would have to build your own kernel and try whether this works.

[helios91940 (florian-plaza)]

I'm going to test it. I have never tried to build a kernel but the tutorial on ubuntu website seems great

[Samwise (sam-inertia)]

I have exactly the same problem on Kubuntu Gusty. I also have an Optiarc AD-5200A. Audio CD's are recognised as Blank CD-R when inserted into the drive. Audio applications, e.g. Kaffiene, are incapable of playing the CD directly, although they are capable of ripping the tracks to MP3/OGG etc.

[helios91940 (florian-plaza)]

This patch works ^^

[Stefan Bader (smb)]

This has been confirmed to be an hardware issue (drive does not report audio playing capability). Checking upstream acceptance.

[Samwise (sam-inertia)]

Thanks Stefan for all your help.
I don't think I will apply the patch because I don't have the expertise to build my own kernel. If you manage to fix the bug, will the fix be applied to the latest kernel update via Synaptic/Adept/apt-get etc?

[Stefan Bader (smb)]

Adding the Optiarc drive to the current quirks list. The upstream driver is currently being reworked and I try to get this pushed upstream as well.

[Launchpad Janitor (janitor)]

This bug was fixed in the package linux - 2.6.24-10.16

---------------
linux (2.6.24-10.16) hardy; urgency=low

  [Alessio Igor Bogani]

  * rt: Synchronized with upstream (2.6.24.2-rt2)
  * rt: Updated configuration files

  [Eric Piel]

  * SAUCE: ACPI: Allow custom DSDT tables to be loaded from initramfs
    Amit Kucheria consolidated the DSDT patch with another fix that
    ifdefs symbols required when BLK_DEV_INITR is disabled.

  [Stefan Bader]

  * Add Optiarc DVD drive to audio quirks list.
    - LP: #186664
  * Update drm and i915 drm driver to fix suspend issues.
    - LP: #189260

  [Tim Gardner]

  * Fix FTBS without BLK_DEV_INITRD
    - LP: #193507
  * 64 bit CPA cache attribute bug
    - LP: #193736
  * Implemented default EDD control

  [Upstream Kernel Changes]

  * bonding: fix NULL pointer deref in startup processing
  * dlm: bind connections from known local address when using TCP
  * dlm: proper prototypes
  * dlm: don't print common non-errors
  * dlm: use dlm prefix on alloc and free functions
  * dlm: close othercons
  * dlm: align midcomms message buffer
  * dlm: swap bytes for rcom lock reply
  * dlm: use fixed errno values in messages
  * dlm: clear ast_type when removing from astqueue
  * dlm: recover locks waiting for overlap replies
  * dlm: another call to confirm_master in receive_request_reply
  * dlm: reject messages from non-members
  * dlm: validate messages before processing
  * dlm: reject normal unlock when lock is waiting for lookup
  * dlm: limit dir lookup loop
  * dlm: fix possible use-after-free
  * dlm: change error message to debug
  * dlm: keep cached master rsbs during recovery
  * dlm: Sanity check namelen before copying it
  * dlm: clean ups
  * dlm: static initialization improvements
  * dlm: use proper C for dlm/requestqueue stuff (and fix alignment bug)
  * dlm: dlm_process_incoming_buffer() fixes
  * dlm: do not byteswap rcom_lock
  * dlm: do not byteswap rcom_config
  * dlm: use proper type for ->ls_recover_buf
  * dlm: missing length check in check_config()
  * dlm: validate data in dlm_recover_directory()
  * dlm: verify that places expecting rcom_lock have packet long enough
  * dlm: receive_rcom_lock_args() overflow check
  * dlm: make find_rsb() fail gracefully when namelen is too large
  * dlm: fix overflows when copying from ->m_extra to lvb
  * dlm: fix dlm_dir_lookup() handling of too long names
  * dlm: dlm/user.c input validation fixes
  * dlm: proper types for asts and basts
  * dlm: eliminate astparam type casting
  * dlm: add __init and __exit marks to init and exit functions
  * virtio: Use PCI revision field to indicate virtio PCI ABI version

 -- Tim Gardner <email address hidden> Tue, 19 Feb 2008 09:57:18 -0700

[zarer (zamasp)]

I have the same problem with an Optiarc DVD RW AD-5200A but i don't undestand how to fix it ? Can you explain how to do with the patch ?

Thanks.

[Stefan Bader (smb)]

Are you using the latest Hardy beta? The fix was included in that.