| 2008-01-29 06:32:20 |
helios91940 |
description |
I have a Optiarc DVD RW AD-5200A and I can't read audio cds. Ubuntu recognizes it as a blank cd and propose me to burn it. I try to launch it on vlc or totem but it doesn't work. Moreover, I tried to upgrade the firmware downloaded from the manufacturer web site but it doesn't change anything.
I test it with a lot of cds audio. Other kinds of cd work properly. Some users have the same problem http://forum.ubuntu-fr.org/viewtopic.php?id=186510
Here's the result of dmesg command:
[ 1675.780000] ide: failed opcode was: unknown
[ 1675.780000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 1675.780000] end_request: I/O error, dev hda, sector 0
[ 1675.780000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 1675.780000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0
Actually, I don't know if it's an hardware or a software problem |
I have a Optiarc DVD RW AD-5200A and I can't read audio cds. Ubuntu recognizes it as a blank cd and propose me to burn it. I try to launch it on vlc or totem but it doesn't work. Moreover, I tried to upgrade the firmware downloaded from the manufacturer web site but it doesn't change anything.
I test it with a lot of cds audio. Other kinds of cd work properly. Some users have the same problem http://forum.ubuntu-fr.org/viewtopic.php?id=186510
Actually, I don't know if it's an hardware or a software problem.
* dmesg
[ 0.660000] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.660000] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 0.664000] Time: hpet clocksource has been installed.
[ 0.664000] Switched to high resolution mode on CPU 0
[ 0.664000] Switched to high resolution mode on CPU 1
[ 0.692000] PCI: Bridge: 0000:00:04.0
[ 0.692000] IO window: b000-bfff
[ 0.692000] MEM window: disabled.
[ 0.692000] PREFETCH window: disabled.
[ 0.692000] PCI: Bridge: 0000:00:09.0
[ 0.692000] IO window: disabled.
[ 0.692000] MEM window: f2000000-f4ffffff
[ 0.692000] PREFETCH window: e0000000-efffffff
[ 0.692000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.692000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 0.692000] NET: Registered protocol family 2
[ 0.736000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.736000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 0.736000] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.736000] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.736000] TCP reno registered
[ 0.752000] checking if image is initramfs... it is
[ 1.304000] Freeing initrd memory: 7062k freed
[ 1.308000] audit: initializing netlink socket (disabled)
[ 1.308000] audit(1201587677.164:1): initialized
[ 1.308000] highmem bounce pool size: 64 pages
[ 1.308000] VFS: Disk quotas dquot_6.5.1
[ 1.308000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.308000] io scheduler noop registered
[ 1.308000] io scheduler anticipatory registered
[ 1.308000] io scheduler deadline registered
[ 1.308000] io scheduler cfq registered (default)
[ 1.308000] Boot video device is 0000:02:00.0
[ 1.308000] PCI: Setting latency timer of device 0000:00:09.0 to 64
[ 1.308000] assign_interrupt_mode Found MSI capability
[ 1.308000] Allocate Port Service[0000:00:09.0:pcie00]
[ 1.308000] isapnp: Scanning for PnP cards...
[ 1.660000] isapnp: No Plug & Play device found
[ 1.684000] Real Time Clock Driver v1.12ac
[ 1.684000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.684000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.684000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.684000] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.684000] 00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 1.684000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.684000] input: Macintosh mouse button emulation as /class/input/input0
[ 1.684000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.684000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 1.688000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.688000] mice: PS/2 mouse device common for all mice
[ 1.688000] EISA: Probing bus 0 at eisa.0
[ 1.688000] Cannot allocate resource for EISA slot 1
[ 1.688000] EISA: Detected 0 cards.
[ 1.688000] TCP cubic registered
[ 1.688000] NET: Registered protocol family 1
[ 1.688000] Using IPI No-Shortcut mode
[ 1.688000] Magic number: 8:604:368
[ 1.688000] Freeing unused kernel memory: 364k freed
[ 1.720000] input: AT Translated Set 2 keyboard as /class/input/input1
[ 3.080000] AppArmor: AppArmor initialized<5>audit(1201587678.664:2): type=1505 info="AppArmor initialized" pid=1240
[ 3.096000] fuse init (API version 7.8)
[ 3.104000] Failure registering capabilities with primary security module.
[ 4.280000] usbcore: registered new interface driver usbfs
[ 4.280000] usbcore: registered new interface driver hub
[ 4.280000] usbcore: registered new device driver usb
[ 4.280000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.280000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 4.280000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 16
[ 4.280000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 4.280000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 4.280000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 4.280000] ohci_hcd 0000:00:02.0: irq 16, io mem 0xf5007000
[ 4.340000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 4.340000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 4.348000] usb usb1: configuration #1 chosen from 1 choice
[ 4.348000] hub 1-0:1.0: USB hub found
[ 4.348000] hub 1-0:1.0: 10 ports detected
[ 4.364000] SCSI subsystem initialized
[ 4.368000] libata version 2.21 loaded.
[ 4.452000] NFORCE-MCP61: IDE controller at PCI slot 0000:00:06.0
[ 4.452000] NFORCE-MCP61: chipset revision 162
[ 4.452000] NFORCE-MCP61: not 100% native mode: will probe irqs later
[ 4.452000] NFORCE-MCP61: BIOS didn't set cable bits correctly. Enabling workaround.
[ 4.452000] NFORCE-MCP61: 0000:00:06.0 (rev a2) UDMA133 controller
[ 4.452000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[ 4.452000] Probing IDE interface ide0...
[ 4.464000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
[ 4.756000] usb 1-4: new low speed USB device using ohci_hcd and address 2
[ 4.960000] usb 1-4: configuration #1 chosen from 1 choice
[ 4.980000] usbcore: registered new interface driver hiddev
[ 4.984000] input: HID 1241:1111 as /class/input/input2
[ 4.984000] input: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:00:02.0-4
[ 4.984000] usbcore: registered new interface driver usbhid
[ 4.984000] /build/buildd/linux-source-2.6.22-2.6.22/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
[ 5.188000] hda: Optiarc DVD RW AD-5200A, ATAPI CD/DVD-ROM drive
[ 5.860000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.860000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 5.860000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 17
[ 5.860000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 5.860000] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 5.860000] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 5.860000] ehci_hcd 0000:00:02.1: debug port 1
[ 5.860000] PCI: cache line size of 64 is not supported by device 0000:00:02.1
[ 5.860000] ehci_hcd 0000:00:02.1: irq 17, io mem 0xf5006000
[ 5.860000] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.860000] usb 1-4: USB disconnect, address 2
[ 5.864000] usb usb2: configuration #1 chosen from 1 choice
[ 5.864000] hub 2-0:1.0: USB hub found
[ 5.864000] hub 2-0:1.0: 10 ports detected
[ 5.968000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[ 5.968000] ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [APCH] -> GSI 21 (level, low) -> IRQ 18
[ 5.968000] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 5.968000] forcedeth: using HIGHDMA
[ 5.980000] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 974kB Cache, UDMA(66)
[ 5.980000] Uniform CD-ROM driver Revision: 3.20
[ 6.476000] usb 1-4: new low speed USB device using ohci_hcd and address 3
[ 6.488000] eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:07.0
[ 6.488000] sata_nv 0000:00:08.0: version 3.4
[ 6.488000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 6.488000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APSI] -> GSI 20 (level, low) -> IRQ 19
[ 6.488000] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 6.488000] scsi0 : sata_nv
[ 6.492000] scsi1 : sata_nv
[ 6.492000] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 19
[ 6.492000] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 19
[ 6.680000] usb 1-4: configuration #1 chosen from 1 choice
[ 6.696000] input: HID 1241:1111 as /class/input/input3
[ 6.696000] input: USB HID v1.00 Mouse [HID 1241:1111] on usb-0000:00:02.0-4
[ 6.960000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 7.004000] ata1.00: Host Protected Area detected:
[ 7.004000] current size: 156299375 sectors
[ 7.004000] native size: 156301488 sectors
[ 7.132000] ata1.00: native size increased to 156301488 sectors
[ 7.132000] ata1.00: ATA-7: MAXTOR STM380815AS, 3.AAD, max UDMA/133
[ 7.132000] ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 7.196000] ata1.00: configured for UDMA/133
[ 7.508000] ata2: SATA link down (SStatus 0 SControl 300)
[ 7.516000] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM380815 3.AA PQ: 0 ANSI: 5
[ 7.528000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 7.528000] sd 0:0:0:0: [sda] Write Protect is off
[ 7.528000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.528000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.528000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 7.528000] sd 0:0:0:0: [sda] Write Protect is off
[ 7.528000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 7.528000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 7.528000] sda: sda1 sda2 < sda5 >
[ 7.580000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 7.588000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 7.968000] Attempting manual resume
[ 7.968000] swsusp: Resume From Partition 8:5
[ 7.968000] PM: Checking swsusp image.
[ 7.968000] PM: Resume from disk failed.
[ 8.032000] kjournald starting. Commit interval 5 seconds
[ 8.032000] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.508000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 17.588000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 17.604000] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 17.604000] i2c-adapter i2c-1: nForce2 SMBus adapter at 0xc800
[ 17.732000] input: PC Speaker as /class/input/input4
[ 17.884000] parport_pc 00:09: reported by Plug and Play ACPI
[ 17.884000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[ 17.896000] Linux agpgart interface v0.102 (c) Dave Jones
[ 17.928000] nvidia: module license 'NVIDIA' taints kernel.
[ 18.184000] ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
[ 18.184000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 20
[ 18.184000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 18.184000] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007
[ 18.332000] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23
[ 18.332000] ACPI: PCI Interrupt 0000:00:05.0[B] -> Link [AAZA] -> GSI 23 (level, low) -> IRQ 16
[ 18.332000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 18.868000] lp0: using parport0 (interrupt-driven).
[ 19.012000] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k
[ 19.024000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 19.028000] EXT3 FS on sda1, internal journal
[ 20.296000] No dock devices found.
[ 20.496000] input: Power Button (FF) as /class/input/input5
[ 20.496000] ACPI: Power Button (FF) [PWRF]
[ 20.496000] input: Power Button (CM) as /class/input/input6
[ 20.496000] ACPI: Power Button (CM) [PWRB]
[ 20.796000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4000+ processors (version 2.00.00)
[ 20.796000] powernow-k8: 0 : fid 0xd (2100 MHz), vid 0xa
[ 20.796000] powernow-k8: 1 : fid 0xc (2000 MHz), vid 0xb
[ 20.796000] powernow-k8: 2 : fid 0xa (1800 MHz), vid 0xd
[ 20.796000] powernow-k8: 3 : fid 0x2 (1000 MHz), vid 0x12
[ 21.876000] ppdev: user-space parallel port driver
[ 22.036000] audit(1201587697.948:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4957 profile="/usr/sbin/cupsd"
[ 22.328000] Failure registering capabilities with primary security module.
[ 22.352000] NET: Registered protocol family 10
[ 22.352000] lo: Disabled Privacy Extensions
[ 24.004000] Clocksource tsc unstable (delta = -264004828 ns)
[ 26.768000] NET: Registered protocol family 17
[ 38.624000] eth0: no IPv6 routers present
[ 506.308000] cdrom: This disc doesn't have any tracks I recognize!
[ 506.328000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.328000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.328000] ide: failed opcode was: unknown
[ 506.328000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.328000] end_request: I/O error, dev hda, sector 0
[ 506.332000] Buffer I/O error on device hda, logical block 0
[ 506.332000] Buffer I/O error on device hda, logical block 1
[ 506.332000] Buffer I/O error on device hda, logical block 2
[ 506.332000] Buffer I/O error on device hda, logical block 3
[ 506.332000] Buffer I/O error on device hda, logical block 4
[ 506.332000] Buffer I/O error on device hda, logical block 5
[ 506.332000] Buffer I/O error on device hda, logical block 6
[ 506.332000] Buffer I/O error on device hda, logical block 7
[ 506.332000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.332000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.332000] ide: failed opcode was: unknown
[ 506.332000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.332000] end_request: I/O error, dev hda, sector 0
[ 506.332000] Buffer I/O error on device hda, logical block 0
[ 506.332000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.332000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.332000] ide: failed opcode was: unknown
[ 506.336000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.336000] end_request: I/O error, dev hda, sector 4
[ 506.336000] Buffer I/O error on device hda, logical block 1
[ 506.336000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.336000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.336000] ide: failed opcode was: unknown
[ 506.336000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.336000] end_request: I/O error, dev hda, sector 32
[ 506.336000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.336000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.336000] ide: failed opcode was: unknown
[ 506.340000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.340000] end_request: I/O error, dev hda, sector 0
[ 506.340000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.340000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.340000] ide: failed opcode was: unknown
[ 506.340000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.340000] end_request: I/O error, dev hda, sector 36
[ 506.340000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.340000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.340000] ide: failed opcode was: unknown
[ 506.340000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.340000] end_request: I/O error, dev hda, sector 0
[ 506.344000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.344000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.344000] ide: failed opcode was: unknown
[ 506.344000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.344000] end_request: I/O error, dev hda, sector 0
[ 506.344000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.344000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.344000] ide: failed opcode was: unknown
[ 506.344000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.344000] end_request: I/O error, dev hda, sector 4
[ 506.348000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.348000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.348000] ide: failed opcode was: unknown
[ 506.348000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.348000] end_request: I/O error, dev hda, sector 0
[ 506.348000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.348000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.348000] ide: failed opcode was: unknown
[ 506.348000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.348000] end_request: I/O error, dev hda, sector 4
[ 506.352000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.352000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.352000] ide: failed opcode was: unknown
[ 506.352000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.352000] end_request: I/O error, dev hda, sector 0
[ 506.352000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.352000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.352000] ide: failed opcode was: unknown
[ 506.352000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.352000] end_request: I/O error, dev hda, sector 4
[ 506.356000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.356000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.356000] ide: failed opcode was: unknown
[ 506.356000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.356000] end_request: I/O error, dev hda, sector 0
[ 506.356000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.356000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.356000] ide: failed opcode was: unknown
[ 506.356000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.356000] end_request: I/O error, dev hda, sector 4
[ 506.356000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.356000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.356000] ide: failed opcode was: unknown
[ 506.360000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.360000] end_request: I/O error, dev hda, sector 0
[ 506.360000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.360000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.360000] ide: failed opcode was: unknown
[ 506.360000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.360000] end_request: I/O error, dev hda, sector 4
[ 506.360000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.360000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.360000] ide: failed opcode was: unknown
[ 506.364000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.364000] end_request: I/O error, dev hda, sector 0
[ 506.364000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.364000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.364000] ide: failed opcode was: unknown
[ 506.364000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.364000] end_request: I/O error, dev hda, sector 4
[ 506.364000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.364000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.364000] ide: failed opcode was: unknown
[ 506.368000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.368000] end_request: I/O error, dev hda, sector 0
[ 506.368000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.368000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.368000] ide: failed opcode was: unknown
[ 506.368000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.368000] end_request: I/O error, dev hda, sector 4
[ 506.372000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.372000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.372000] ide: failed opcode was: unknown
[ 506.372000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.372000] end_request: I/O error, dev hda, sector 0
[ 506.372000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.372000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.372000] ide: failed opcode was: unknown
[ 506.372000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.372000] end_request: I/O error, dev hda, sector 4
[ 506.376000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.376000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.376000] ide: failed opcode was: unknown
[ 506.376000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.376000] end_request: I/O error, dev hda, sector 0
[ 506.376000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.376000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.376000] ide: failed opcode was: unknown
[ 506.376000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.376000] end_request: I/O error, dev hda, sector 4
[ 506.380000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.380000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.380000] ide: failed opcode was: unknown
[ 506.380000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.380000] end_request: I/O error, dev hda, sector 0
[ 506.380000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.380000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.380000] ide: failed opcode was: unknown
[ 506.380000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.380000] end_request: I/O error, dev hda, sector 4
[ 506.384000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.384000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.384000] ide: failed opcode was: unknown
[ 506.384000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.384000] end_request: I/O error, dev hda, sector 0
[ 506.384000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.384000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.384000] ide: failed opcode was: unknown
[ 506.384000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.384000] end_request: I/O error, dev hda, sector 4
[ 506.388000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.388000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.388000] ide: failed opcode was: unknown
[ 506.388000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.388000] end_request: I/O error, dev hda, sector 0
[ 506.388000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.388000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.388000] ide: failed opcode was: unknown
[ 506.388000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.388000] end_request: I/O error, dev hda, sector 4
[ 506.392000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.392000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.392000] ide: failed opcode was: unknown
[ 506.392000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.392000] end_request: I/O error, dev hda, sector 0
[ 506.396000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.396000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.396000] ide: failed opcode was: unknown
[ 506.396000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.396000] end_request: I/O error, dev hda, sector 4
[ 506.396000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.396000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.396000] ide: failed opcode was: unknown
[ 506.396000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.396000] end_request: I/O error, dev hda, sector 0
[ 506.396000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.396000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.396000] ide: failed opcode was: unknown
[ 506.400000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.400000] end_request: I/O error, dev hda, sector 4
[ 506.400000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.400000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.400000] ide: failed opcode was: unknown
[ 506.400000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.400000] end_request: I/O error, dev hda, sector 0
[ 506.400000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.400000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.400000] ide: failed opcode was: unknown
[ 506.404000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.404000] end_request: I/O error, dev hda, sector 4
[ 506.404000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.404000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.404000] ide: failed opcode was: unknown
[ 506.404000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.404000] end_request: I/O error, dev hda, sector 0
[ 506.404000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.404000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.404000] ide: failed opcode was: unknown
[ 506.408000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.408000] end_request: I/O error, dev hda, sector 4
[ 506.408000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.408000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.408000] ide: failed opcode was: unknown
[ 506.408000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.408000] end_request: I/O error, dev hda, sector 0
[ 506.408000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.408000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.408000] ide: failed opcode was: unknown
[ 506.412000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.412000] end_request: I/O error, dev hda, sector 4
[ 506.412000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.412000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.412000] ide: failed opcode was: unknown
[ 506.412000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.412000] end_request: I/O error, dev hda, sector 0
[ 506.412000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.412000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.412000] ide: failed opcode was: unknown
[ 506.412000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.412000] end_request: I/O error, dev hda, sector 4
[ 506.416000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.416000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.416000] ide: failed opcode was: unknown
[ 506.416000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.416000] end_request: I/O error, dev hda, sector 0
[ 506.416000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.416000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.416000] ide: failed opcode was: unknown
[ 506.416000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.416000] end_request: I/O error, dev hda, sector 4
[ 506.420000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.420000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.420000] ide: failed opcode was: unknown
[ 506.420000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.420000] end_request: I/O error, dev hda, sector 0
[ 506.420000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.420000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.420000] ide: failed opcode was: unknown
[ 506.420000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.420000] end_request: I/O error, dev hda, sector 4
[ 506.424000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.424000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.424000] ide: failed opcode was: unknown
[ 506.424000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.424000] end_request: I/O error, dev hda, sector 0
[ 506.424000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.424000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.424000] ide: failed opcode was: unknown
[ 506.424000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.424000] end_request: I/O error, dev hda, sector 4
[ 506.424000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.424000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.424000] ide: failed opcode was: unknown
[ 506.428000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.428000] end_request: I/O error, dev hda, sector 0
[ 506.428000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.428000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.428000] ide: failed opcode was: unknown
[ 506.428000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.428000] end_request: I/O error, dev hda, sector 4
[ 506.428000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.428000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.428000] ide: failed opcode was: unknown
[ 506.432000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.432000] end_request: I/O error, dev hda, sector 0
[ 506.432000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.432000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.432000] ide: failed opcode was: unknown
[ 506.432000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.432000] end_request: I/O error, dev hda, sector 4
[ 506.432000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.432000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.432000] ide: failed opcode was: unknown
[ 506.436000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.436000] end_request: I/O error, dev hda, sector 0
[ 506.436000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.436000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.436000] ide: failed opcode was: unknown
[ 506.436000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.436000] end_request: I/O error, dev hda, sector 4
[ 506.444000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.444000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.444000] ide: failed opcode was: unknown
[ 506.444000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.444000] end_request: I/O error, dev hda, sector 0
[ 506.444000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.444000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.444000] ide: failed opcode was: unknown
[ 506.448000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.448000] end_request: I/O error, dev hda, sector 4
[ 506.452000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.452000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.452000] ide: failed opcode was: unknown
[ 506.452000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.452000] end_request: I/O error, dev hda, sector 0
[ 506.452000] hda: command error: status=0x51 { DriveReady SeekComplete Error }
[ 506.452000] hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }
[ 506.452000] ide: failed opcode was: unknown
[ 506.452000] hda: error code: 0x70 sense_key: 0x05 asc: 0x64 ascq: 0x00
[ 506.452000] end_request: I/O error, dev hda, sector 4
*cat /proc/version_signature
Ubuntu 2.6.22-14.47-generic
*uname -a
Linux helios91-desktop 2.6.22-14-generic #1 SMP Tue Dec 18 08:02:57 UTC 2007 i686 GNU/Linux
*sudo lspci -vvnn
00:00.0 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03ea] (rev a1)
Subsystem: Giga-byte Technology Unknown device [1458:5001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [44] HyperTransport: Slave or Primary Interface
Command: BaseUnitID=0 UnitCnt=17 MastHost- DefDir- DUL-
Link Control 0: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
Revision ID: 1.03
Link Frequency 0: 1.0GHz
Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
Link Frequency 1: 200MHz
Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
Prefetchable memory behind bridge Upper: 00-00
Bus Number: 00
Capabilities: [dc] HyperTransport: MSI Mapping
00:01.0 ISA bridge [0601]: nVidia Corporation MCP61 LPC Bridge [10de:03e0] (rev a2)
Subsystem: Giga-byte Technology Unknown device [1458:0c11]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:01.1 SMBus [0c05]: nVidia Corporation MCP61 SMBus [10de:03eb] (rev a2)
Subsystem: Giga-byte Technology Unknown device [1458:0c11]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at c000 [size=64]
Region 4: I/O ports at 1c00 [size=64]
Region 5: I/O ports at c800 [size=64]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.2 RAM memory [0500]: nVidia Corporation MCP61 Memory Controller [10de:03f5] (rev a2)
Subsystem: Giga-byte Technology Unknown device [1458:0c11]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:02.0 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f1] (rev a2) (prog-if 10 [OHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f5007000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:02.1 USB Controller [0c03]: nVidia Corporation MCP61 USB Controller [10de:03f2] (rev a2) (prog-if 20 [EHCI])
Subsystem: Giga-byte Technology Unknown device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=256]
Capabilities: [44] Debug port
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:04.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI bridge [10de:03f3] (rev a1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 0000b000-0000bfff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: [b8] Subsystem: Giga-byte Technology Unknown device [1458:026f]
Capabilities: [8c] HyperTransport: MSI Mapping
00:05.0 Audio device [0403]: nVidia Corporation MCP61 High Definition Audio [10de:03f0] (rev a2)
Subsystem: Giga-byte Technology Unknown device [1458:a002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin B routed to IRQ 16
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping
00:06.0 IDE interface [0101]: nVidia Corporation MCP61 IDE [10de:03ec] (rev a2) (prog-if 8a [Master SecP PriP])
Subsystem: Giga-byte Technology Unknown device [1458:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at f000 [size=16]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:07.0 Bridge [0680]: nVidia Corporation MCP61 Ethernet [10de:03ef] (rev a2)
Subsystem: Giga-byte Technology Unknown device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f5004000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at cc00 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable-
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping
00:08.0 IDE interface [0101]: nVidia Corporation MCP61 SATA Controller [10de:03f6] (rev a2) (prog-if 85 [Master SecO PriO])
Subsystem: Giga-byte Technology Unknown device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 09f0 [size=8]
Region 1: I/O ports at 0bf0 [size=4]
Region 2: I/O ports at 0970 [size=8]
Region 3: I/O ports at 0b70 [size=4]
Region 4: I/O ports at e000 [size=16]
Region 5: Memory at f5005000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [cc] HyperTransport: MSI Mapping
00:09.0 PCI bridge [0604]: nVidia Corporation MCP61 PCI Express bridge [10de:03e8] (rev a2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f2000000-f4ffffff
Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
Capabilities: [40] Subsystem: nVidia Corporation Unknown device [10de:0000]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [60] HyperTransport: MSI Mapping
Capabilities: [80] Express Root Port (Slot+) IRQ 0
Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <64ns, L1 <1us
Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <512ns, L1 <4us
Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x8
Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
Slot: Number 1, PowerLimit 75.000000
Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Slot: AttnInd Off, PwrInd On, Power-
Root: Correctable- Non-Fatal- Fatal- PME-
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [80] HyperTransport: Host or Secondary Interface
!!! Possibly incomplete decoding
Command: WarmRst+ DblEnd-
Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
Revision ID: 1.02
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Capabilities: [f0] #0f [0010]
02:00.0 VGA compatible controller [0300]: nVidia Corporation NV44 [GeForce 6200 LE] [10de:0163] (rev a1) (prog-if 00 [VGA])
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:820b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f3000000 (64-bit, non-prefetchable) [size=16M]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express Endpoint IRQ 0
Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
Device: Latency L0s <512ns, L1 <4us
Device: AtnBtn- AtnInd- PwrInd-
Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
Link: Latency L0s <256ns, L1 <4us
Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
Link: Speed 2.5Gb/s, Width x8
|
|
