After that the proper set printer appeared "automagiclly" in System->Administration->Printer Settings
The problem is that it's not working if you restart system with started printer.
I.e. error message from hp-firmaware
HP Linux Imaging and Printing System (ver. 2.8.7)
Firmware Download Utility ver. 1.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Using device: hp:/usb/HP_LaserJet_1018?serial=KP28TX4
error: Unable to communicate with device (code=12): hp:/usb/HP_LaserJet_1018?serial=KP28TX4
error: Error opening device (Device not found). Exiting.
and dmesg:
[ 618.508495] type=1503 audit(1234744567.807:5): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=5826 profile="/usr/sbin/cupsd"
[ 623.992230] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hpijs rqt 128 rq 6 len 255 ret -110
[ 653.774576] type=1503 audit(1234744603.071:6): operation="inode_permission" requested_mask="::rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=5891 profile="/usr/sbin/cupsd"
[ 657.588130] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
[ 658.888164] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hpijs rqt 128 rq 6 len 255 ret -110
[ 681.984069] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
[ 686.984112] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
[ 692.284107] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
[ 692.592054] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
[ 727.760205] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
Next step was to install foomatic-db-hpijs
After that the proper set printer appeared "automagiclly" in System- >Administration ->Printer Settings
The problem is that it's not working if you restart system with started printer.
I.e. error message from hp-firmaware
HP Linux Imaging and Printing System (ver. 2.8.7)
Firmware Download Utility ver. 1.1
Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Using device: hp:/usb/ HP_LaserJet_ 1018?serial= KP28TX4 HP_LaserJet_ 1018?serial= KP28TX4
error: Unable to communicate with device (code=12): hp:/usb/
error: Error opening device (Device not found). Exiting.
and dmesg:
[ 618.508495] type=1503 audit(123474456 7.807:5) : operation= "inode_ permission" requested_ mask=": :rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=5826 profile= "/usr/sbin/ cupsd" 3.071:6) : operation= "inode_ permission" requested_ mask=": :rw" denied_mask="::rw" fsuid=7 name="/dev/tty" pid=5891 profile= "/usr/sbin/ cupsd"
[ 623.992230] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hpijs rqt 128 rq 6 len 255 ret -110
[ 653.774576] type=1503 audit(123474460
[ 657.588130] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
[ 658.888164] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hpijs rqt 128 rq 6 len 255 ret -110
[ 681.984069] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
[ 686.984112] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
[ 692.284107] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd python rqt 128 rq 6 len 255 ret -110
[ 692.592054] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110
[ 727.760205] usb 1-2: usbfs: USBDEVFS_CONTROL failed cmd hp rqt 128 rq 6 len 255 ret -110