Hello all,
i have the same problem on my machine (32bit). I changed the Hardware from my Computer so i can't use the kernel 2.5.18 from xensource. Any solutions found?
xen:
- ubuntu-xen-desktop
- script "multi-bridges" same as in xen 3.1 before (xenbrX changed to ethX)
- standart xend-config.sxp (only script changed, but before testet with )
uname -r:
2.6.24-12-xen
iproute from hardy:
should work, i get no error message
Hello all,
i have the same problem on my machine (32bit). I changed the Hardware from my Computer so i can't use the kernel 2.5.18 from xensource. Any solutions found?
DISTRIB_ID=Ubuntu RELEASE= 8.04 CODENAME= hardy DESCRIPTION= "Ubuntu hardy (development branch)"
DISTRIB_ARCH=x86 (32bit)
DISTRIB_
DISTRIB_
DISTRIB_
Computer:
- Asus P5K Pro
- Q6600
- 8192 MB RAM
xen:
- ubuntu-xen-desktop
- script "multi-bridges" same as in xen 3.1 before (xenbrX changed to ethX)
- standart xend-config.sxp (only script changed, but before testet with )
uname -r:
2.6.24-12-xen
iproute from hardy:
should work, i get no error message
lspci |grep net: 8139C/8139C+ (rev 10)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
05:01.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/
brctl show:
bridge name bridge id STP enabled interfaces
eth0 8000.000e2eb7c63e no peth0
eth1 8000.001e8c0d3aea no peth1
xm create testmachine.cfg:
Using config file "testmachine.cfg".
Error: Device 0 (vif) could not be connected. Hotplug scripts not working.
thanks, Andy