Wireless Card RTL819Xe on a Samsung N150 netbook
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Fix Released
|
Medium
|
Unassigned |
Bug Description
This card works intermittently and follows a set sequence.
1. On 1st boot the card comes up as disabled.
2. On second boot the card comes up as enabled but will not connect to the wireless network, although it can see the network.
3. On third boot the card works O.K.
Here is the output of dmesg on first Boot.
=======
[ 22.929131] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.929149] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 23.000709] WARNING: at /build/
[ 23.000842] [<f8648679>] ? rtl8192_
[ 23.000870] [<f8648679>] ? rtl8192_
[ 23.000912] [<f8648679>] rtl8192_
[ 23.001158] [<f83390a3>] rtl8192_
[ 23.001197] [<f8339000>] ? rtl8192_
[ 23.717668] rtllib_crypt: registered algorithm 'NULL'
[ 23.717678] rtllib_crypt: registered algorithm 'TKIP'
[ 23.717685] rtllib_crypt: registered algorithm 'CCMP'
[ 23.717691] rtllib_crypt: registered algorithm 'WEP'
[ 24.808336] rtl819xE:ERR in CPUcheck_
[ 24.808349] rtl819xE:ERR in init_firmware()
[ 24.808359] rtl819xE:ERR!!! _rtl8192_up(): initialization is failed!
=======
Here is output of dmesg on Second boot
=======
[ 22.250813] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.250831] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 22.405211] WARNING: at /build/
[ 22.405349] [<f8570679>] ? rtl8192_
[ 22.405377] [<f8570679>] ? rtl8192_
[ 22.405414] [<f8570679>] rtl8192_
[ 22.405685] [<f82750a3>] rtl8192_
[ 22.405723] [<f8275000>] ? rtl8192_
[ 22.907988] rtllib_crypt: registered algorithm 'NULL'
[ 22.909972] rtllib_crypt: registered algorithm 'TKIP'
[ 22.909982] rtllib_crypt: registered algorithm 'CCMP'
[ 22.909989] rtllib_crypt: registered algorithm 'WEP'
[ 52.276380] rtl819xE:ERR in CPUcheck_
[ 52.276391] rtl819xE:ERR in init_firmware()
[ 52.276401] rtl819xE:ERR!!! NicIFEnableNIC(): initialization is failed!
[ 70.008142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.008157] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.128105] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.128120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.248131] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.248142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.368093] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.368107] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.488108] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.488124] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.608106] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.608121] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.728142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.728158] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.848120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.848136] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.968144] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.968161] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.088208] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.088224] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.208127] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.208143] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
=======
Here is output of device in dmsg on third boot
=======
[ 20.618762] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.618778] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 20.692093] WARNING: at /build/
[ 20.692220] [<f85a6679>] ? rtl8192_
[ 20.692249] [<f85a6679>] ? rtl8192_
[ 20.692290] [<f85a6679>] rtl8192_
[ 20.692475] [<f82740a3>] rtl8192_
[ 20.692513] [<f8274000>] ? rtl8192_
[ 21.427868] rtllib_crypt: registered algorithm 'NULL'
[ 21.427880] rtllib_crypt: registered algorithm 'TKIP'
[ 21.427886] rtllib_crypt: registered algorithm 'CCMP'
[ 21.427892] rtllib_crypt: registered algorithm 'WEP'
[ 25.324061] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.324078] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.444062] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.444077] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.564104] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.564120] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.684093] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.684109] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.804096] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.804108] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
=======
---
Architecture: i386
DistroRelease: Ubuntu 11.04
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
Package: linux (not installed)
ProcEnviron:
LANGUAGE=en_GB:en
LANG=en_GB.UTF-8
LC_MESSAGES=
SHELL=/bin/bash
ProcVersionSign
Regression: Yes
Tags: natty running-unity
Uname: Linux 2.6.38-1-generic i686
UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
---
Architecture: i386
DistroRelease: Ubuntu 11.04
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
Package: linux (not installed)
ProcEnviron:
LANGUAGE=en_GB:en
LANG=en_GB.UTF-8
LC_MESSAGES=
SHELL=/bin/bash
ProcVersionSign
Regression: Yes
Tags: natty running-unity
Uname: Linux 2.6.38-3-generic i686
UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
Changed in linux (Ubuntu): | |
status: | Incomplete → New |
tags: | added: natty |
Changed in linux (Ubuntu): | |
status: | Incomplete → New |
tags: | added: kj-triage |
no longer affects: | null |
tags: | added: patch |
Changed in linux (Ubuntu): | |
importance: | Undecided → Medium |
tags: | added: kernel-fixed-upstream-v3.2 |
tags: | added: kernel-fixed-upstream |
tags: | removed: kernel-fixed-upstream |
tags: | added: needs-full-computer-model needs-kernel-logs |
Peter, you've reported this as a bug on 'Launchpad', which is the bug tracking software, rather than on 'Ubuntu' which I presume is what you intended. I've made a new task on Ubuntu for you, and and closing the 'Launchpad' task (because Launchpad is a website, not part of Ubuntu).