2011-01-27 15:59:59 |
Peter Cooper |
bug |
|
|
added bug |
2011-01-27 15:59:59 |
Peter Cooper |
attachment added |
|
Device_will_not_connect https://bugs.launchpad.net/bugs/708712/+attachment/1810593/+files/Device_will_not_connect |
|
2011-01-27 16:00:43 |
Peter Cooper |
attachment added |
|
Device_not_Ready https://bugs.launchpad.net/launchpad/+bug/708712/+attachment/1810594/+files/Device_not_Ready |
|
2011-01-27 19:53:12 |
Robert Collins |
bug task added |
|
ubuntu |
|
2011-01-27 19:54:45 |
Robert Collins |
affects |
launchpad |
null |
|
2011-01-27 19:54:45 |
Robert Collins |
null: status |
New |
Invalid |
|
2011-01-28 20:21:22 |
Fabio Marconi |
affects |
ubuntu |
linux (Ubuntu) |
|
2011-01-28 20:24:39 |
Fabio Marconi |
bug |
|
|
added subscriber Fabio Marconi |
2011-01-28 20:24:51 |
Fabio Marconi |
linux (Ubuntu): status |
New |
Incomplete |
|
2011-01-31 21:38:24 |
Peter Cooper |
attachment added |
|
not_connected https://bugs.launchpad.net/null/+bug/708712/+attachment/1820585/+files/not_connected |
|
2011-02-01 19:52:48 |
Fabio Marconi |
linux (Ubuntu): status |
Incomplete |
New |
|
2011-02-01 19:53:37 |
Fabio Marconi |
tags |
|
natty |
|
2011-02-01 19:58:19 |
Fabio Marconi |
linux (Ubuntu): status |
New |
Incomplete |
|
2011-02-01 20:03:16 |
Fabio Marconi |
tags |
natty |
kernel-wifi natty |
|
2011-02-03 07:41:32 |
Peter Cooper |
tags |
kernel-wifi natty |
apport-collected kernel-wifi natty running-unity |
|
2011-02-03 07:41:37 |
Peter Cooper |
description |
This card works intermittently and follows a set sequence.
1. On 1st boot the card comes up as disabled.
2. On second boot the card comes up as enabled but will not connect to the wireless network, although it can see the network.
3. On third boot the card works O.K.
Here is the output of dmesg on first Boot.
=========================================
[ 22.929131] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.929149] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 23.000709] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 23.000842] [<f8648679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.000870] [<f8648679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.000912] [<f8648679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.001158] [<f83390a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 23.001197] [<f8339000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 23.717668] rtllib_crypt: registered algorithm 'NULL'
[ 23.717678] rtllib_crypt: registered algorithm 'TKIP'
[ 23.717685] rtllib_crypt: registered algorithm 'CCMP'
[ 23.717691] rtllib_crypt: registered algorithm 'WEP'
[ 24.808336] rtl819xE:ERR in CPUcheck_firmware_ready()
[ 24.808349] rtl819xE:ERR in init_firmware()
[ 24.808359] rtl819xE:ERR!!! _rtl8192_up(): initialization is failed!
===================================================
Here is output of dmesg on Second boot
=====================================================
[ 22.250813] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.250831] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 22.405211] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 22.405349] [<f8570679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405377] [<f8570679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405414] [<f8570679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405685] [<f82750a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 22.405723] [<f8275000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 22.907988] rtllib_crypt: registered algorithm 'NULL'
[ 22.909972] rtllib_crypt: registered algorithm 'TKIP'
[ 22.909982] rtllib_crypt: registered algorithm 'CCMP'
[ 22.909989] rtllib_crypt: registered algorithm 'WEP'
[ 52.276380] rtl819xE:ERR in CPUcheck_firmware_ready()
[ 52.276391] rtl819xE:ERR in init_firmware()
[ 52.276401] rtl819xE:ERR!!! NicIFEnableNIC(): initialization is failed!
[ 70.008142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.008157] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.128105] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.128120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.248131] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.248142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.368093] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.368107] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.488108] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.488124] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.608106] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.608121] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.728142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.728158] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.848120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.848136] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.968144] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.968161] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.088208] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.088224] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.208127] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.208143] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
=====================================================
Here is output of device in dmsg on third boot
========================================================
[ 20.618762] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.618778] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 20.692093] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 20.692220] [<f85a6679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692249] [<f85a6679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692290] [<f85a6679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692475] [<f82740a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 20.692513] [<f8274000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 21.427868] rtllib_crypt: registered algorithm 'NULL'
[ 21.427880] rtllib_crypt: registered algorithm 'TKIP'
[ 21.427886] rtllib_crypt: registered algorithm 'CCMP'
[ 21.427892] rtllib_crypt: registered algorithm 'WEP'
[ 25.324061] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.324078] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.444062] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.444077] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.564104] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.564120] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.684093] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.684109] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.804096] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.804108] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
======================================================== |
This card works intermittently and follows a set sequence.
1. On 1st boot the card comes up as disabled.
2. On second boot the card comes up as enabled but will not connect to the wireless network, although it can see the network.
3. On third boot the card works O.K.
Here is the output of dmesg on first Boot.
=========================================
[ 22.929131] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.929149] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 23.000709] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 23.000842] [<f8648679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.000870] [<f8648679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.000912] [<f8648679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.001158] [<f83390a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 23.001197] [<f8339000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 23.717668] rtllib_crypt: registered algorithm 'NULL'
[ 23.717678] rtllib_crypt: registered algorithm 'TKIP'
[ 23.717685] rtllib_crypt: registered algorithm 'CCMP'
[ 23.717691] rtllib_crypt: registered algorithm 'WEP'
[ 24.808336] rtl819xE:ERR in CPUcheck_firmware_ready()
[ 24.808349] rtl819xE:ERR in init_firmware()
[ 24.808359] rtl819xE:ERR!!! _rtl8192_up(): initialization is failed!
===================================================
Here is output of dmesg on Second boot
=====================================================
[ 22.250813] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.250831] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 22.405211] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 22.405349] [<f8570679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405377] [<f8570679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405414] [<f8570679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405685] [<f82750a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 22.405723] [<f8275000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 22.907988] rtllib_crypt: registered algorithm 'NULL'
[ 22.909972] rtllib_crypt: registered algorithm 'TKIP'
[ 22.909982] rtllib_crypt: registered algorithm 'CCMP'
[ 22.909989] rtllib_crypt: registered algorithm 'WEP'
[ 52.276380] rtl819xE:ERR in CPUcheck_firmware_ready()
[ 52.276391] rtl819xE:ERR in init_firmware()
[ 52.276401] rtl819xE:ERR!!! NicIFEnableNIC(): initialization is failed!
[ 70.008142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.008157] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.128105] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.128120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.248131] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.248142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.368093] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.368107] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.488108] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.488124] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.608106] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.608121] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.728142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.728158] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.848120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.848136] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.968144] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.968161] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.088208] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.088224] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.208127] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.208143] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
=====================================================
Here is output of device in dmsg on third boot
========================================================
[ 20.618762] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.618778] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 20.692093] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 20.692220] [<f85a6679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692249] [<f85a6679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692290] [<f85a6679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692475] [<f82740a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 20.692513] [<f8274000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 21.427868] rtllib_crypt: registered algorithm 'NULL'
[ 21.427880] rtllib_crypt: registered algorithm 'TKIP'
[ 21.427886] rtllib_crypt: registered algorithm 'CCMP'
[ 21.427892] rtllib_crypt: registered algorithm 'WEP'
[ 25.324061] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.324078] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.444062] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.444077] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.564104] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.564120] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.684093] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.684109] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.804096] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.804108] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
========================================================
---
Architecture: i386
DistroRelease: Ubuntu 11.04
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
Package: linux (not installed)
ProcEnviron:
LANGUAGE=en_GB:en
LANG=en_GB.UTF-8
LC_MESSAGES=en_GB.utf8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.38-1.28-generic 2.6.38-rc2
Regression: Yes
Tags: natty running-unity
Uname: Linux 2.6.38-1-generic i686
UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
|
|
2011-02-12 19:55:04 |
Fabio Marconi |
tags |
apport-collected kernel-wifi natty running-unity |
kernel-wifi natty running-unity |
|
2011-02-13 10:05:17 |
Peter Cooper |
tags |
kernel-wifi natty running-unity |
apport-collected kernel-wifi natty running-unity |
|
2011-02-13 10:05:19 |
Peter Cooper |
description |
This card works intermittently and follows a set sequence.
1. On 1st boot the card comes up as disabled.
2. On second boot the card comes up as enabled but will not connect to the wireless network, although it can see the network.
3. On third boot the card works O.K.
Here is the output of dmesg on first Boot.
=========================================
[ 22.929131] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.929149] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 23.000709] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 23.000842] [<f8648679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.000870] [<f8648679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.000912] [<f8648679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.001158] [<f83390a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 23.001197] [<f8339000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 23.717668] rtllib_crypt: registered algorithm 'NULL'
[ 23.717678] rtllib_crypt: registered algorithm 'TKIP'
[ 23.717685] rtllib_crypt: registered algorithm 'CCMP'
[ 23.717691] rtllib_crypt: registered algorithm 'WEP'
[ 24.808336] rtl819xE:ERR in CPUcheck_firmware_ready()
[ 24.808349] rtl819xE:ERR in init_firmware()
[ 24.808359] rtl819xE:ERR!!! _rtl8192_up(): initialization is failed!
===================================================
Here is output of dmesg on Second boot
=====================================================
[ 22.250813] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.250831] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 22.405211] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 22.405349] [<f8570679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405377] [<f8570679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405414] [<f8570679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405685] [<f82750a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 22.405723] [<f8275000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 22.907988] rtllib_crypt: registered algorithm 'NULL'
[ 22.909972] rtllib_crypt: registered algorithm 'TKIP'
[ 22.909982] rtllib_crypt: registered algorithm 'CCMP'
[ 22.909989] rtllib_crypt: registered algorithm 'WEP'
[ 52.276380] rtl819xE:ERR in CPUcheck_firmware_ready()
[ 52.276391] rtl819xE:ERR in init_firmware()
[ 52.276401] rtl819xE:ERR!!! NicIFEnableNIC(): initialization is failed!
[ 70.008142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.008157] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.128105] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.128120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.248131] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.248142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.368093] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.368107] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.488108] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.488124] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.608106] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.608121] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.728142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.728158] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.848120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.848136] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.968144] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.968161] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.088208] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.088224] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.208127] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.208143] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
=====================================================
Here is output of device in dmsg on third boot
========================================================
[ 20.618762] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.618778] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 20.692093] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 20.692220] [<f85a6679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692249] [<f85a6679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692290] [<f85a6679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692475] [<f82740a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 20.692513] [<f8274000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 21.427868] rtllib_crypt: registered algorithm 'NULL'
[ 21.427880] rtllib_crypt: registered algorithm 'TKIP'
[ 21.427886] rtllib_crypt: registered algorithm 'CCMP'
[ 21.427892] rtllib_crypt: registered algorithm 'WEP'
[ 25.324061] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.324078] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.444062] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.444077] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.564104] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.564120] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.684093] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.684109] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.804096] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.804108] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
========================================================
---
Architecture: i386
DistroRelease: Ubuntu 11.04
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
Package: linux (not installed)
ProcEnviron:
LANGUAGE=en_GB:en
LANG=en_GB.UTF-8
LC_MESSAGES=en_GB.utf8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.38-1.28-generic 2.6.38-rc2
Regression: Yes
Tags: natty running-unity
Uname: Linux 2.6.38-1-generic i686
UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
|
This card works intermittently and follows a set sequence.
1. On 1st boot the card comes up as disabled.
2. On second boot the card comes up as enabled but will not connect to the wireless network, although it can see the network.
3. On third boot the card works O.K.
Here is the output of dmesg on first Boot.
=========================================
[ 22.929131] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.929149] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 23.000709] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 23.000842] [<f8648679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.000870] [<f8648679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.000912] [<f8648679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 23.001158] [<f83390a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 23.001197] [<f8339000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 23.717668] rtllib_crypt: registered algorithm 'NULL'
[ 23.717678] rtllib_crypt: registered algorithm 'TKIP'
[ 23.717685] rtllib_crypt: registered algorithm 'CCMP'
[ 23.717691] rtllib_crypt: registered algorithm 'WEP'
[ 24.808336] rtl819xE:ERR in CPUcheck_firmware_ready()
[ 24.808349] rtl819xE:ERR in init_firmware()
[ 24.808359] rtl819xE:ERR!!! _rtl8192_up(): initialization is failed!
===================================================
Here is output of dmesg on Second boot
=====================================================
[ 22.250813] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 22.250831] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 22.405211] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 22.405349] [<f8570679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405377] [<f8570679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405414] [<f8570679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 22.405685] [<f82750a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 22.405723] [<f8275000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 22.907988] rtllib_crypt: registered algorithm 'NULL'
[ 22.909972] rtllib_crypt: registered algorithm 'TKIP'
[ 22.909982] rtllib_crypt: registered algorithm 'CCMP'
[ 22.909989] rtllib_crypt: registered algorithm 'WEP'
[ 52.276380] rtl819xE:ERR in CPUcheck_firmware_ready()
[ 52.276391] rtl819xE:ERR in init_firmware()
[ 52.276401] rtl819xE:ERR!!! NicIFEnableNIC(): initialization is failed!
[ 70.008142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.008157] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.128105] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.128120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.248131] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.248142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.368093] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.368107] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.488108] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.488124] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.608106] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.608121] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.728142] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.728158] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.848120] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.848136] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.968144] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 70.968161] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.088208] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.088224] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.208127] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
[ 71.208143] rtl819xE:No more TX desc@6, ring->idx = 0,idx = 0,3b
=====================================================
Here is output of device in dmsg on third boot
========================================================
[ 20.618762] rtl819xE 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 20.618778] rtl819xE 0000:05:00.0: setting latency timer to 64
[ 20.692093] WARNING: at /build/buildd/linux-2.6.37/include/linux/netdevice.h:1557 rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]()
[ 20.692220] [<f85a6679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692249] [<f85a6679>] ? rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692290] [<f85a6679>] rtl8192_pci_probe+0x2eb/0x3b9 [r8192e_pci]
[ 20.692475] [<f82740a3>] rtl8192_pci_module_init+0xa3/0xb4 [r8192e_pci]
[ 20.692513] [<f8274000>] ? rtl8192_pci_module_init+0x0/0xb4 [r8192e_pci]
[ 21.427868] rtllib_crypt: registered algorithm 'NULL'
[ 21.427880] rtllib_crypt: registered algorithm 'TKIP'
[ 21.427886] rtllib_crypt: registered algorithm 'CCMP'
[ 21.427892] rtllib_crypt: registered algorithm 'WEP'
[ 25.324061] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.324078] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.444062] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.444077] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.564104] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.564120] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.684093] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.684109] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.804096] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
[ 25.804108] rtl819xE:Nic is disabled! Can't tx packet len=82 qidx=6!!!
========================================================
---
Architecture: i386
DistroRelease: Ubuntu 11.04
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
Package: linux (not installed)
ProcEnviron:
LANGUAGE=en_GB:en
LANG=en_GB.UTF-8
LC_MESSAGES=en_GB.utf8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.38-1.28-generic 2.6.38-rc2
Regression: Yes
Tags: natty running-unity
Uname: Linux 2.6.38-1-generic i686
UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
---
Architecture: i386
DistroRelease: Ubuntu 11.04
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
Package: linux (not installed)
ProcEnviron:
LANGUAGE=en_GB:en
LANG=en_GB.UTF-8
LC_MESSAGES=en_GB.utf8
SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.38-3.30-generic 2.6.38-rc4
Regression: Yes
Tags: natty running-unity
Uname: Linux 2.6.38-3-generic i686
UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
|
|
2011-02-13 17:23:39 |
Fabio Marconi |
linux (Ubuntu): status |
Incomplete |
New |
|
2011-02-22 15:45:38 |
Jeremy Foshee |
tags |
apport-collected kernel-wifi natty running-unity |
apport-collected kernel-wifi kj-triage natty running-unity |
|
2011-03-04 14:04:31 |
Evan |
linux (Ubuntu): status |
New |
Confirmed |
|
2011-03-25 18:09:43 |
Fabio Marconi |
bug |
|
|
added subscriber Evan Dandrea |
2011-04-07 15:34:14 |
Graeme Hewson |
attachment added |
|
dmesg https://bugs.launchpad.net/ubuntu/+source/linux/+bug/708712/+attachment/1994833/+files/dmesg |
|
2011-04-07 15:36:08 |
Graeme Hewson |
bug |
|
|
added subscriber Graeme Hewson |
2011-05-02 18:03:56 |
John Rooney |
bug |
|
|
added subscriber John Rooney |
2011-05-02 22:38:07 |
tatsuno |
bug |
|
|
added subscriber tatsuno |
2011-10-11 12:47:25 |
tatsuno |
removed subscriber tatsuno |
|
|
|
2011-10-16 09:21:07 |
Richard Dawe |
bug |
|
|
added subscriber Richard Dawe |
2011-10-18 20:34:55 |
Joseph Salisbury |
tags |
apport-collected kernel-wifi kj-triage natty running-unity |
apport-collected kernel-wifi kj-triage natty needs-upstream-testing running-unity |
|
2011-10-25 21:51:40 |
John Rooney |
attachment added |
|
708712-Logs.tar.gz https://bugs.launchpad.net/null/+bug/708712/+attachment/2572646/+files/708712-Logs.tar.gz |
|
2011-10-25 21:53:56 |
John Rooney |
tags |
apport-collected kernel-wifi kj-triage natty needs-upstream-testing running-unity |
apport-collected kernel-wifi kj-triage natty running-unity |
|
2011-11-11 21:28:13 |
Curtis Hovey |
bug task deleted |
null |
|
|
2011-11-12 10:59:26 |
Richard Dawe |
attachment added |
|
Increase time-outs for CPU init and firmware upload https://bugs.launchpad.net/ubuntu/+source/linux/+bug/708712/+attachment/2593909/+files/rtl8192e-timing-20111112.patch |
|
2011-11-12 12:13:17 |
Ubuntu Foundations Team Bug Bot |
tags |
apport-collected kernel-wifi kj-triage natty running-unity |
apport-collected kernel-wifi kj-triage natty patch running-unity |
|
2011-11-12 12:13:19 |
Ubuntu Foundations Team Bug Bot |
bug |
|
|
added subscriber Joseph Salisbury |
2012-01-09 08:37:46 |
Joseph Salisbury |
linux (Ubuntu): importance |
Undecided |
Medium |
|
2012-01-09 08:39:00 |
Joseph Salisbury |
tags |
apport-collected kernel-wifi kj-triage natty patch running-unity |
apport-collected kernel-fixed-upstream-v3.2 kernel-wifi kj-triage natty patch running-unity |
|
2012-07-26 14:28:46 |
penalvch |
attachment removed |
dmesg https://bugs.launchpad.net/ubuntu/+source/linux/+bug/708712/+attachment/1994833/+files/dmesg |
|
|
2012-07-26 14:28:47 |
penalvch |
attachment removed |
708712-Logs.tar.gz https://bugs.launchpad.net/ubuntu/+source/linux/+bug/708712/+attachment/2572646/+files/708712-Logs.tar.gz |
|
|
2012-07-26 14:29:25 |
penalvch |
linux (Ubuntu): status |
Confirmed |
Incomplete |
|
2012-08-04 10:26:07 |
John Rooney |
tags |
apport-collected kernel-fixed-upstream-v3.2 kernel-wifi kj-triage natty patch running-unity |
apport-collected kernel-fixed-upstream kernel-fixed-upstream-v3.2 kernel-wifi kj-triage natty patch running-unity |
|
2012-08-04 10:29:43 |
John Rooney |
tags |
apport-collected kernel-fixed-upstream kernel-fixed-upstream-v3.2 kernel-wifi kj-triage natty patch running-unity |
apport-collected kernel-fixed-upstream-v3.2 kernel-wifi kj-triage natty patch running-unity |
|
2012-09-23 12:05:27 |
Graeme Hewson |
removed subscriber Graeme Hewson |
|
|
|
2012-10-02 17:23:14 |
Tim Gardner |
linux (Ubuntu): status |
Incomplete |
Fix Released |
|
2013-08-04 20:26:56 |
penalvch |
tags |
apport-collected kernel-fixed-upstream-v3.2 kernel-wifi kj-triage natty patch running-unity |
apport-collected kernel-fixed-upstream-v3.2 kernel-wifi kj-triage natty needs-full-computer-model needs-kernel-logs patch running-unity |
|