Comment 9 for bug 1347936

On a second cold boot with kernel 3.13.11-03131105-generic three drives were detected:
$ lsscsi
[4:0:0:0] disk ATA OCZ-VERTEX 1.3 /dev/sda
[5:0:0:0] disk ATA Hitachi HDS5C302 MZ4O /dev/sdb
[7:0:0:0] disk ATA Hitachi HDS5C302 MZ4O /dev/sdc
[9:0:0:0] disk ATA Hitachi HDS5C302 MZ4O /dev/sdd
[12:0:0:0] process Marvell 91xx Config 1.01 -

Dmesg:
...
[ 5.546642] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 8.611661] ata8.00: qc timeout (cmd 0xef)
[ 8.646489] ata9.00: qc timeout (cmd 0xef)
[ 8.681338] ata8.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 8.716343] ata9.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 8.751376] ata10.00: qc timeout (cmd 0xef)
[ 8.786624] ata6.00: qc timeout (cmd 0xef)
[ 8.822125] ata10.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 8.857834] ata6.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 9.838479] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9.894417] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 10.573746] ata11.00: qc timeout (cmd 0xec)
[ 10.617705] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 10.654255] ata11: hard resetting link
[ 10.801539] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.907481] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 12.944295] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 22.933705] ata10.00: qc timeout (cmd 0xef)
[ 22.970176] ata9.00: qc timeout (cmd 0xef)
[ 23.006138] ata10.00: failed to read native max address (err_mask=0x40)
[ 23.042392] ata10.00: HPA support seems broken, skipping HPA handling
[ 23.078709] ata10: limiting SATA link speed to 1.5 Gbps
[ 23.114898] ata9.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 23.114900] ata9: limiting SATA link speed to 1.5 Gbps
[ 23.151305] ata11.00: qc timeout (cmd 0xec)
[ 23.151311] ata6.00: qc timeout (cmd 0xef)
[ 23.157478] ata6.00: failed to read native max address (err_mask=0x40)
[ 23.157479] ata6.00: HPA support seems broken, skipping HPA handling
[ 23.157480] ata6: limiting SATA link speed to 1.5 Gbps
[ 23.157493] ata11.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 23.157494] ata11: limiting SATA link speed to 1.5 Gbps
[ 23.157495] ata11: hard resetting link
[ 25.115578] ata8.00: qc timeout (cmd 0xec)
[ 25.155554] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 25.191377] ata8: limiting SATA link speed to 1.5 Gbps
[ 27.405357] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 27.441319] ata10: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 27.477177] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 27.513221] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 27.565200] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 32.544337] ata11.00: qc timeout (cmd 0xef)
[ 32.577704] ata9.00: qc timeout (cmd 0x27)
[ 32.610128] ata11.00: failed to IDENTIFY (SPINUP failed, err_mask=0x4)
[ 32.642010] ata11: hard resetting link
[ 32.672790] ata9.00: failed to read native max address (err_mask=0x4)
[ 32.672790] ata9.00: HPA support seems broken, skipping HPA handling
[ 33.727197] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 34.862691] ata6.00: ATA-8: Hitachi HDS5C3020BLE630, MZ4OAAB0, max UDMA/133
[ 34.893796] ata6.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 34.924940] ata11: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 34.955916] ata10.00: ATA-8: Hitachi HDS5C3020BLE630, MZ4OAAB0, max UDMA/133
[ 34.987135] ata10.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 35.018602] ata11: EH complete
[ 35.049856] ata8.00: ATA-8: Hitachi HDS5C3020BLE630, MZ4OAAB0, max UDMA/133
[ 35.081242] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 35.112794] ata6.00: configured for UDMA/133
[ 35.144514] scsi 5:0:0:0: Direct-Access ATA Hitachi HDS5C302 MZ4O PQ: 0 ANSI: 5
[ 35.176748] ata10.00: configured for UDMA/133