htree_dirblock_to_tree:920: inode #53629599: block 214443464: comm rm: bad entry in directory: rec_len % 4 != 0 - offset=0(0), inode=1667681412, rec_len=45654, name_len=39
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Fix Released
|
Low
|
Unassigned |
Bug Description
fs goes into read-only mode while building LibreOffice.
WORKAROUND: Disable discard option - /dev/mapper/
disabling ncq has no effect.
$ dmesg
...
[ 2045.473249] virbr0: port 1(vnet0) entered forwarding state
[ 2045.473283] IPv6: ADDRCONF(
[10660.961381] perf samples too long (2505 > 2500), lowering kernel.
[11822.935891] EXT4-fs error (device dm-1): htree_dirblock_
[11822.935896] Aborting journal on device dm-1-8.
[11822.935998] EXT4-fs (dm-1): Remounting filesystem read-only
[11822.960425] EXT4-fs error (device dm-1): htree_dirblock_
[11850.985003] EXT4-fs error (device dm-1): htree_dirblock_
[11850.985276] EXT4-fs error (device dm-1): htree_dirblock_
[11850.985499] EXT4-fs error (device dm-1): htree_dirblock_
[11850.985927] EXT4-fs error (device dm-1): htree_dirblock_
[11850.986409] EXT4-fs error (device dm-1): htree_dirblock_
[11850.986831] EXT4-fs error (device dm-1): htree_dirblock_
[11850.987001] EXT4-fs error (device dm-1): htree_dirblock_
[11850.987466] EXT4-fs error (device dm-1): htree_dirblock_
[11850.988115] EXT4-fs error (device dm-1): htree_dirblock_
[11851.042303] EXT4-fs error (device dm-1): htree_dirblock_
[11851.042938] EXT4-fs error (device dm-1): htree_dirblock_
[11851.045745] EXT4-fs error (device dm-1): htree_dirblock_
[11851.125849] EXT4-fs error (device dm-1): htree_dirblock_
[11851.126086] EXT4-fs error (device dm-1): htree_dirblock_
[11851.126292] EXT4-fs error (device dm-1): htree_dirblock_
[11851.126529] EXT4-fs error (device dm-1): htree_dirblock_
[11851.126751] EXT4-fs error (device dm-1): htree_dirblock_
[11851.127326] EXT4-fs error (device dm-1): htree_dirblock_
[11851.191574] EXT4-fs error (device dm-1): htree_dirblock_
[11851.191832] EXT4-fs error (device dm-1): htree_dirblock_
[11851.192102] EXT4-fs error (device dm-1): htree_dirblock_
[11851.193231] EXT4-fs error (device dm-1): htree_dirblock_
[ritesh@x230t libreoffice-
[ritesh@x230t libreoffice-
smartctl 6.2 2013-07-26 r3841 [x86_64-
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontoo
[ritesh@x230t libreoffice-
sudo: unable to open /var/lib/
smartctl 6.2 2013-07-26 r3841 [x86_64-
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontoo
=== START OF INFORMATION SECTION ===
Device Model: Crucial_
Serial Number: 1335094BE7CA
LU WWN Device Id: 5 00a075 1094be7ca
Firmware Version: MU03
User Capacity: 960,197,124,096 bytes [960 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: ACS-2, ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Dec 11 11:38:48 2013 IST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x80) Offline data collection activity
was never started.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4470) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 74) minutes.
Conveyance self-test routine
recommended polling time: ( 3) minutes.
SCT capabilities: (0x0035) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 000 Pre-fail Always - 21
5 Reallocated_
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 287
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 32
171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0
173 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 1
174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 13
180 Unused_
183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0032 100 100 000 Old_age Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
194 Temperature_Celsius 0x0022 056 050 000 Old_age Always - 44 (Min/Max 22/50)
196 Reallocated_
197 Current_
198 Offline_
199 UDMA_CRC_
202 Unknown_
206 Unknown_
210 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 4
246 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 2001841864
247 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 63823477
248 Unknown_Attribute 0x0032 100 100 --- Old_age Always - 84291328
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Vendor (0xff) Completed without error 00% 279 -
# 2 Extended offline Completed without error 00% 273 -
# 3 Vendor (0xff) Completed without error 00% 90 -
# 4 Vendor (0xff) Completed without error 00% 5 -
# 5 Short offline Aborted by host 00% 2 -
# 6 Vendor (0xff) Completed without error 00% 2 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[ritesh@x230t libreoffice-
Linux x230t 3.12.0-7-generic #15-Ubuntu SMP Sun Dec 8 23:39:27 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
$ mount
/dev/mapper/
proc on /proc type proc (rw,noexec,
sysfs on /sys type sysfs (rw,noexec,
none on /sys/fs/cgroup type tmpfs (rw)
none on /sys/fs/
none on /sys/kernel/debug type debugfs (rw)
none on /sys/kernel/
none on /sys/firmware/
udev on /dev type devtmpfs (rw,mode=0755)
devpts on /dev/pts type devpts (rw,noexec,
tmpfs on /tmp type tmpfs (rw,noatime,
tmpfs on /run type tmpfs (rw,noexec,
none on /run/lock type tmpfs (rw,noexec,
none on /run/shm type tmpfs (rw,nosuid,nodev)
none on /run/user type tmpfs (rw,noexec,
none on /sys/fs/pstore type pstore (rw)
tmpfs on /var/tmp type tmpfs (rw,noatime,
tmpfs on /var/log type tmpfs (rw,noatime,
cgroup on /sys/fs/
cgroup on /sys/fs/cgroup/cpu type cgroup (rw,relatime,cpu)
cgroup on /sys/fs/
cgroup on /sys/fs/
cgroup on /sys/fs/
cgroup on /sys/fs/
cgroup on /sys/fs/
cgroup on /sys/fs/
cgroup on /sys/fs/
/dev/sda2 on /boot type ext2 (rw)
/dev/sda1 on /boot/efi type vfat (rw)
systemd on /sys/fs/
gvfsd-fuse on /run/user/1000/gvfs type fuse.gvfsd-fuse (rw,nosuid,
fsck/badblock (read only) says disk is clean.
---
ApportVersion: 2.12.7-0ubuntu1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/
/dev/snd/
CRDA:
country IN:
(2402 - 2482 @ 40), (N/A, 20)
(5170 - 5250 @ 40), (N/A, 20)
(5250 - 5330 @ 40), (N/A, 20), DFS
(5735 - 5835 @ 40), (N/A, 20)
CurrentDesktop: Unity
DistroRelease: Ubuntu 14.04
HibernationDevice: RESUME=
MachineType: ASUSTeK Computer Inc. K43SA
MarkForUpload: True
Package: linux (not installed)
ProcFB: 0 radeondrmfb
ProcKernelCmdLine: BOOT_IMAGE=
ProcVersionSign
RelatedPackageV
linux-
linux-
linux-firmware 1.117
StagingDrivers: rts5139
Tags: trusty staging
Uname: Linux 3.12.0-7-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip kvm libvirtd lpadmin plugdev sambashare sudo
WifiSyslog:
dmi.bios.date: 11/17/2011
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: K43SA.211
dmi.board.
dmi.board.name: K43SA
dmi.board.vendor: ASUSTeK Computer Inc.
dmi.board.version: 1.0
dmi.chassis.
dmi.chassis.type: 10
dmi.chassis.vendor: ASUSTeK Computer Inc.
dmi.chassis.
dmi.modalias: dmi:bvnAmerican
dmi.product.name: K43SA
dmi.product.
dmi.sys.vendor: ASUSTeK Computer Inc.
---
ApportVersion: 2.12.7-0ubuntu3
Architecture: amd64
CurrentDesktop: Unity
DistroRelease: Ubuntu 14.04
InstallationDate: Installed on 2013-12-19 (1 days ago)
InstallationMedia: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20131021.1)
MarkForUpload: True
Package: linux (not installed)
Tags: trusty
Uname: Linux 3.13.0-999-generic x86_64
UnreportableReason: The running kernel is not an Ubuntu kernel
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
Changed in linux (Ubuntu): | |
status: | Incomplete → New |
tags: | added: latest-bios-211 regression-potential |
Changed in linux (Ubuntu): | |
status: | Confirmed → Incomplete |
Changed in linux (Ubuntu): | |
status: | Incomplete → New |
tags: |
added: kernel-bug-exists-upstream-v3.13-rc3 removed: kernel-bug-exists-upstream |
description: | updated |
description: | updated |
summary: |
- htree_dirblock_to_tree:920: inode #53629599: block 214443464: comm rm: - bad entry in directory: rec_len % 4 != 0 - offset=0(0), - inode=1667681412, rec_len=45654, name_len=39 + fstrim corrpution on some SSDs |
summary: |
- fstrim corrpution on some SSDs + fstrim corrupution on some SSDs |
This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run:
apport-collect 1259829
and then change the status of the bug to 'Confirmed'.
If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.
This change has been made by an automated script, maintained by the Ubuntu Kernel Team.