HP Laserjet 1000 doesn't work with cups2
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
cupsys (Ubuntu) |
New
|
Undecided
|
Unassigned | ||
foo2zjs (Ubuntu) |
Fix Released
|
Medium
|
Unassigned |
Bug Description
Good day,
I'm not able to make my HP LaserJet 1000 (usb) printer works with Ubuntu dapper.
This printers works fine with breezy if you manually download the latest foo2zjs driver from :
http://
(foo2zjs in breezy doesn't have the firmware)
Under dapper, the firmware autoloading works fine but every thing I print stay in the queue without any error message (even with LogLevel set to debug).
But if I downgraded cupsys and libcupsys to breezy version (and replace /var/run/
I'm happy to provide additional info or test something if needed.
Regards.
--
Djoume SALVETTI
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Herman Bos (hbos) wrote : | #1 |
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
webwolf_27 (jeremy-fam-schoenhaar) wrote : | #2 |
I can as well ( unfortuanately ) confirm. Printer is found, firmare loaded to /dev/usb/lp0 ( or lp1) but printing is not possible
Changed in cupsys: | |
status: | Unconfirmed → Confirmed |
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Caspar Adriani (thecas) wrote : | #3 |
Same problem here, If I use the dapper foo2zjs build it gets detected and gives no problems in the CUPS management untill you send a printjob.
CUPS complains about "printer busy trying again in 5 seconds" and in my cups I find this:
-------
D [29/May/
D [29/May/
D [29/May/
D [29/May/
D [29/May/
D [29/May/
D [29/May/
D [29/May/
----------------
I also uninstalled the official foo2zjs and installed http://
-------
May 29 16:43:19 printserver kernel: [43196572.270000] usb 2-1: new full speed USB device using uhci_hcd and address 9
May 29 16:43:20 printserver kernel: [43196572.420000] drivers/
alt 0 proto 2 vid 0x03F0 pid 0x0517
May 29 16:43:20 printserver /etc/hotplug/
May 29 16:43:20 printserver /etc/hotplug/
May 29 16:46:09 printserver foo2zjs-wrapper: foo2zjs-wrapper -P -r600x600 -p1 -s7 -m1 -n1
May 29 16:49:01 printserver foo2zjs-wrapper: gs -sPAPERSIZE=letter -g5100x6600 -r600x600 -sDEVICE=pbmraw
May 29 16:49:01 printserver foo2zjs-wrapper: foo2zjs -r600x600 -g5100x6600 -p1 -m1 -n1 -d1 -s7 -z0 -u 102x102 -l 102x106
-P
May 29 16:49:04 printserver foo2zjs-wrapper: foo2zjs-wrapper -P -r600x600 -p1 -s7 -m1 -n1
-------------
the cups log shows this:
-------------
D [29/May/
W [29/May/
-------------
If there is anything I can try I love to hear it.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Sorush.Nazari (s-nazari) wrote : | #4 |
Trying to downgrade to cups2 as mentioned by the Djoume SALVETTI, is much more tricker than I expected.. Is there any method I could go about doing this. ?
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Ante Karamatić (ivoks) wrote : | #5 |
There have been lots of fixes in cups1.2.1. Are you willing to try some testing packages? They are at:
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Sorush.Nazari (s-nazari) wrote : Re: [Bug 43824] Re: HP Laserjet 1000 doesn't work with cups2 | #6 |
yes I am, willing, which package should I use in the link above. ?
Could you let me know which package?
On 04/06/06, Ante Karamatić <email address hidden> wrote:
>
> There have been lots of fixes in cups1.2.1. Are you willing to try some
> testing packages? They are at:
>
> http://
>
> --
> HP Laserjet 1000 doesn't work with cups2
> https:/
>
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
deif (taler) wrote : | #7 |
i have got the same problem
I installed
cupsys_
libcupsys2-
from the link above and the only differece I have noticed is that the status window now says printer-stopped instead of printer-paused...
is there any way of getting more debug information?
the entries in /var/log/messages and /var/log/
cups/error_log:
E [04/Jun/
E [04/Jun/
E [04/Jun/
E [04/Jun/
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Ante Karamatić (ivoks) wrote : | #8 |
Put
deb http://
in /etc/apt/
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
deif (taler) wrote : | #9 |
that was quite noisy but I think I found something:
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
...
D [05/Jun/
D [05/Jun/
d [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
D [05/Jun/
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Sorush.Nazari (s-nazari) wrote : | #11 |
This is why I get in the error file
sudo kwrite /var/log/
E [05/Jun/
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
E [05/Jun/
certificate not found!
and here is what I get from the
/var/log/messages
Jun 5 17:24:06 localhost kernel: [4294677.841000] ReiserFS: hda2: checking
transaction log (hda2)
Jun 5 17:24:06 localhost kernel: [4294677.873000] ReiserFS: hda2: Using r5
hash to sort names
Jun 5 17:24:06 localhost kernel: [4294682.961000] hda:
set_drive_
Jun 5 17:24:06 localhost kernel: [4294682.961000] ide: failed opcode was:
unknown
Jun 5 17:24:06 localhost kernel: [4294702.952000] hda: dma_timer_expiry:
dma status == 0x60
Jun 5 17:24:06 localhost kernel: [4294702.952000] hda: DMA timeout retry
Jun 5 17:24:06 localhost kernel: [4294703.554000] Linux agpgart interface
v0.101 (c) Dave Jones
Jun 5 17:24:06 localhost kernel: [4294703.591000] agpgart:...
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
DrFaNaTiC (drfanatic) wrote : | #12 |
I have exactly equal problem. My HP LaserJet 1000 does not print since more Dapper Drake no more.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Ante Karamatić (ivoks) wrote : | #13 |
Try changing DeviceURI in /etc/cups/
DeviceURI file:///dev/usblp0
Thanks.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Ante Karamatić (ivoks) wrote : | #14 |
Please, attach output of:
dpkg -l | grep hplip-base
Thank you.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
deif (taler) wrote : | #15 |
i have changed the device uri and the printer state now stays on printing:
a few lines of /var/log/
D [16/Jun/
D [16/Jun/
dpkg -l |grep hplip-base
rc hplip-base 0.9.5-2ubuntu2 HP Linux Printing and Imaging System - base
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Ante Karamatić (ivoks) wrote : | #16 |
Do:
sudo dpkg --purge hplip-base
sudo apt-get --reinstall install hplip
sudo /etc/init.d/cupsys restart
Try adding you printer then. Soon we will have new CUPS packages in Dapper which should help most of these errors.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
DrFaNaTiC (drfanatic) wrote : | #17 |
Try changing DeviceURI in /etc/cups/
DeviceURI file:///dev/usblp0
Thanks.
Functions! This change and:
sudo bash -c 'cat sihp1000.img >/dev/usblp0'
leave mean printers again to print
Thank You Ante Karamatić!
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
deif (taler) wrote : | #18 |
I had to change the DeviceURI to file:///dev/usb/lp0 and it works
thx a lot
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Ante Karamatić (ivoks) wrote : | #19 |
If you are interested in helping with this bug, please add:
deb http://
to /etc/apt/
Those who have /dev/usb/lp0 are using wrong kernel. Please install linux-686 (or -386 or -k7 or...) package.
Thank you.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
deif (taler) wrote : | #20 |
i have installed the new packages and seen no change.
my deviceUri is still /dev/usb/lp0 and i use kernel 2.6.15-25-k7
but i updated from breezy
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Ante Karamatić (ivoks) wrote : | #21 |
Try adding a new printer trough gnome-cups-manager and then print test page. Don't change anything manually, just add it like it shoulde be done.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Sorush.Nazari (s-nazari) wrote : | #22 |
Hi guys,
Now I keep getting the message that cups server could not be detect.
I have tried to restart it. It does restart but the same error happens.
On 20/06/06, Ante Karamatić <email address hidden> wrote:
> Try adding a new printer trough gnome-cups-manager and then print test
> page. Don't change anything manually, just add it like it shoulde be
> done.
>
> --
> HP Laserjet 1000 doesn't work with cups2
> https:/
>
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Ante Karamatić (ivoks) wrote : Re: [Bug 43824] Re: [Bug 43824] Re: HP Laserjet 1000 doesn't work with cups2 | #23 |
On Wed, 21 Jun 2006 08:01:15 -0000
"Sorush.Nazari" <email address hidden> wrote:
> Hi guys,
> Now I keep getting the message that cups server could not be detect.
> I have tried to restart it. It does restart but the same error
> happens.
Attach your /var/log/
and /etc/cups/
--
Ante Karamatic | 0xD3BDA225 | 0x0A4A0161
<email address hidden> | <email address hidden> | ivoks.blogspot.com
"Tomorrow is my day off, so please stay off the powder!"
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
deif (taler) wrote : | #24 |
i have to change the deviceUri to make the printer work
I got the message the cups server can not be detected to. it was becauseof a false deviceUri in printers.conf.
i have deleted printers.conf and error_log and restarted cups reinstalled the printer and tried to print a testpage: here is the log file: http://
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Sorush.Nazari (s-nazari) wrote : Re: [Bug 43824] Re: HP Laserjet 1000 doesn't work with cups2 | #25 |
I don't know what to do right now , coudl some one advice me further
please..
On 23/06/06, deif <email address hidden> wrote:
>
> i have to change the deviceUri to make the printer work
>
> I got the message the cups server can not be detected to. it was
> becauseof a false deviceUri in printers.conf.
>
> i have deleted printers.conf and error_log and restarted cups
> reinstalled the printer and tried to print a testpage: here is the log
> file: http://
>
> --
> HP Laserjet 1000 doesn't work with cups2
> https:/
>
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
deif (taler) wrote : | #26 |
i think it shuld work like this:
delete /etc/cups/
restart cupsys
reinstall the printer with the gui
change deviceUri in /etc/cups/
restart cupsys
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Sorush.Nazari (s-nazari) wrote : | #27 |
On 23/06/06, deif <email address hidden> wrote:
>
> i think it shuld work like this:
> delete /etc/cups/
> restart cupsys
> reinstall the printer with the gui
> change deviceUri in /etc/cups/
> file://
> restart cupsys
>
> --
> HP Laserjet 1000 doesn't work with cups2
> https:/
>
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Don Carros (don-carros) wrote : | #28 |
This is from: http://
It worked for me too. Here is the relevant text:
"1- it seems that the hplip 0.9.7 has some problems recognising usb printers. Solution is to install the latest HPLIP version from hplip.sourcefor
2- some printers are special: like mine for instance (HP laserjet 1000) requires that it's firmware be downloaded to the printer at every power up. When I tried to install the printer in the new environment, there was no driver for my specific printer. I went ahead selecting a "close model" and I get the exact same result as "everything works as expected but the printer does not print". After some research, I discovered the pecurliar behavior of my printer when I found a linux printer driver for it at http:// foo2rjs.rkkda.com.
I can correlate this behavior with some people having "intermittent" problems with their printer if they shut them off between their computing sessions. So, in cases like this, make sure that you have the exact driver for your printer. I have found the link to my driver in Google by searching with "linux HP 1000 printer driver". Try it with your printer and see what comes out of it.
One final detail: make sure that user cupsys is registered in the lpadmin group. Another detail that I am not sure if it makes a difference (I did not test all possibilities) but I set the access right to /dev/usblp0 to rw for owner, group and others.
After setting all other CUPS and Samba networking configuration, I can now print from the local linux workstation, the remote linux workstation and any windows workstations on my network (I am a newbie with linux but and old, old goat with computers in general"
FOLLOW UP COMMENTS: The HPLIP update to 1.6.6 fixed my machine as well as the printing problems associated with SAMBA. The ODD part is that I too have a Laserjet 1000 and HPLIP specifically does NOT support this printer. But upon upgrading the printer showed up on the correct USB port and everything worked fine.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Sorush.Nazari (s-nazari) wrote : | #30 |
guys update I think I have fixed everything now .. the DiviceURI was typed
in correctly.. as soon as i changed it and saved the .txt conf. file the
whole thing just started up and ran fine.
On 28/06/06, sorush nazari <<email address hidden> > wrote:
>
> I have performed what Don Carros had suggested but I have still had no
> luck. After compiling and installation of the latest hplip, with patch
> .. and removing old ones I now keep getting the message that I should
> check to see that cups is running properly. Which it is.
> I have attached all the new relevant files.
>
> On 27/06/06, Don Carros <email address hidden> wrote:
> > This is from: http://
> >
> > It worked for me too. Here is the relevant text:
> >
> > "1- it seems that the hplip 0.9.7 has some problems recognising usb
> > printers. Solution is to install the latest HPLIP version from
> > hplip.sourcefor
> > newbie like me) as you have to uninstall the actual version, install the
> > full compiling environment for the new version, dowload the version and
> > patch, aplly the patches, compile, install, restart hplip and cups, etc
> > (alouette...local joke). Current version is 1.6.6 and I sincerely wish
> > that Ubuntu upgrades it's packaged version. In the meantime, carefully
> > read and follow the installation instructions provided on the HPLIP site
> > and everything should go fine.
> >
> > 2- some printers are special: like mine for instance (HP laserjet 1000)
> > requires that it's firmware be downloaded to the printer at every power
> > up. When I tried to install the printer in the new environment, there
> > was no driver for my specific printer. I went ahead selecting a "close
> > model" and I get the exact same result as "everything works as expected
> > but the printer does not print". After some research, I discovered the
> > pecurliar behavior of my printer when I found a linux printer driver for
> > it at http:// foo2rjs.rkkda.com.
> >
> > I can correlate this behavior with some people having "intermittent"
> > problems with their printer if they shut them off between their
> > computing sessions. So, in cases like this, make sure that you have the
> > exact driver for your printer. I have found the link to my driver in
> > Google by searching with "linux HP 1000 printer driver". Try it with
> > your printer and see what comes out of it.
> >
> > One final detail: make sure that user cupsys is registered in the
> > lpadmin group. Another detail that I am not sure if it makes a
> > difference (I did not test all possibilities) but I set the access right
>
> > to /dev/usblp0 to rw for owner, group and others.
> >
> > After setting all other CUPS and Samba networking configuration, I can
> > now print from the local linux workstation, the remote linux workstation
>
> > and any windows workstations on my network (I am a newbie with linux but
> > and old, old goat with computers in general"
> >
> > FOLLOW UP COMMENTS: The HPLIP update to 1.6.6 fixed my machine as well
> > as the printing problems associated with SAMBA. The ODD part is that I
> > too have a Laserjet 1000 and HPLI...
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Ante Karamatić (ivoks) wrote : | #31 |
If someone is interested in testing hplip packages, add:
deb http://
to /etc/apt/
apt-get update ; apt-get install hplip hpijs hpijs-ppds hplip-data
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Philip Yusenda (phil-yusenda) wrote : | #32 |
Tested the repo on
deb http://
after that:
apt-get update
apt-get dist-upgrade
Then go into KDE's System Setting, Printers, Add
The printer detected on /usb/hp_
Choose driver HP - Laserjet 1000 foo2zjs
Voila, it prints!
Big thanks Ante!
Philip
Indonesia
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Till Kamppeter (till-kamppeter) wrote : | #33 |
The LaserJet 1000 is not supported by HPLIP, so Ante's HPLIP update most probably will not have fixed this problem, but the "apt-get dist-upgrade" has most probably also pulled the foo2zjs update from the official repositories.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Philip Yusenda (phil-yusenda) wrote : | #34 |
@Till
I don't think so
Before the steps above, I've updated the foo2zjs with the instructions from http://
Also, the "apt-get dist-upgrade" doesn't touch foo2zjs, but only hplip hpijs hplip-data . The strange thing is, hpijs-ppds dissapear also. "The package has no installation candidate"
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Till Kamppeter (till-kamppeter) wrote : | #35 |
Can you run the command
dpkg -l *foo*
Changed in cupsys: | |
status: | Confirmed → Needs Info |
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Philip Yusenda (phil-yusenda) wrote : | #36 |
Results of "dpkg -l *foo*"
# dpkg -l *foo*
Desired=
| Status=
|/ Err?=(none)
||/ Name Version Description
+++-===
ii foo2zjs 20051220dfsg-1 Support for printing to ZjStream-based print
un foomatic-bin <none> (no description available)
ii foomatic-db 20060408-1ubun linuxprinting.org printer support - database
ii foomatic-db-en 3.0.2-20060318 linuxprinting.org printer support - programs
ii foomatic-db-gi 5.0.0~rc2-0ubu linuxprinting.org printer support - database
ii foomatic-db-gu 5.0.0~rc2-0ubu linuxprinting.org printer support - database
ii foomatic-db-hp 1.5-20060318-1 linuxprinting.org printer support - database
ii foomatic-filte 3.0.2-20060318 linuxprinting.org printer support - filters
ii foomatic-filte 20060406-0ubun linuxprinting.org printer support - prebuilt
un foomatic-gui <none> (no description available)
ii python-foomati 0.7.4.18 Python interface to the Foomatic printer dat
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Till Kamppeter (till-kamppeter) wrote : | #37 |
Can you (or someone else) test the HP LaserJet 1000/1005/1018/1020 with Edgy/6.10 beta (live CD)?
Have you installed the firmware on your computer before setting up your print queue?
Everytime after the installation of foo2zjs you can do this with
getweb 1000
arm2hpdl <file created by getweb> > /usr/share/
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Till Kamppeter (till-kamppeter) wrote : | #38 |
- Replacement UDEV rules file for HP LaserJet 1000 Edit (703 bytes, text/plain)
Can you replace your file
/etc/udev/
by the attached one? Does your printer work now? You can test this both under Dapper or Edgy.
Changed in cupsys: | |
status: | Needs Info → Fix Released |
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
JohnFlux (johnflux) wrote : | #39 |
For my HP 1018 LaserJet printer, I had to do : "rmmod uhci_hcd" to get the printer to work for me.
![](/+icing/build/overlay/assets/skins/sam/images/close.gif)
Till Kamppeter (till-kamppeter) wrote : | #40 |
JohnFlux, can you report a new bug with that? Needing to unload a kernel module is a kernel problem. Assign it to the package linux-source-
I have this printer available as well. If more info is needed i might be able to supply it as well.
At first looks I can confirm the bugreport. Works in breezy, not in dapper.
Out of the box nothing happened in dapper (it did get recognized, etc, dmesg). After installing foo2zjs with firmware and hotplug script it makes some startup noises. This is the same for breezy btw. But in breezy you can actually print and in dapper nothing happens.