Comment 2 for bug 1746970

Hi, I confirm the bug on direct attach.

Using a fiber switch is working as expected for me.

---

1a:00.0 Fibre Channel: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter (rev 02)
        Subsystem: Emulex Corporation Zephyr-X LightPulse Fibre Channel Host Adapter
        Physical Slot: 3
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx+
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 0, Cache Line Size: 64 bytes
        Interrupt: pin A routed to IRQ 30
        Region 0: Memory at 97a00000 (64-bit, non-prefetchable) [size=4K]
        Region 2: Memory at 97a01000 (64-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 2100 [size=256]
        Expansion ROM at 97a40000 [disabled] [size=256K]
        Capabilities: [58] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] MSI: Enable+ Count=1/8 Maskable- 64bit+
                Address: 00000000fee00000 Data: 40d2
        Capabilities: [70] Vital Product Data
                Product Name: LPE11002 4GB/S 2-PORT FC: PCI EXPRESS HBA SFF DIAG OPTICS
                Read-only fields:
                        [PN] Part number: 42C2071
                        [SN] Serial number: 11S43W7511Y650HY1C2YTK
                        [V0] Vendor specific: FC14803247
                        [VL] Vendor specific: FRU 43W7512
                        [V1] Vendor specific: IBM 42C2071 4Gb 2-Port PCIe FC HBA for System x
                        [V2] Vendor specific: 42C2071
                        [V3] Vendor specific: T2:E1,E8,T3:E1,E2,E3,E5,E6,E7,T6:E1,T7:E1,TB:E1
                        [V4] Vendor specific: 0
                        [V5] Vendor specific: LPe11002
                        [RV] Reserved: checksum good, 1 byte(s) reserved
                End
        Capabilities: [44] Express (v1) Endpoint, MSI 00
                DevCap: MaxPayload 2048 bytes, PhantFunc 0, Latency L0s <4us, L1 <16us
                        ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset- SlotPowerLimit 0.000W
                DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                        RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
                        MaxPayload 256 bytes, MaxReadReq 4096 bytes
                DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
                LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s, Exit Latency L0s <4us, L1 unlimited
                        ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
                LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk-
                        ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
                LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
        Capabilities: [100 v1] Advanced Error Reporting
                UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
                UESvrt: DLP+ SDES- TLP+ FCP+ CmpltTO+ CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol-
                CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
                CEMsk: RxErr+ BadTLP+ BadDLLP+ Rollover+ Timeout+ NonFatalErr-
                AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
        Capabilities: [12c v1] Power Budgeting <?>
        Kernel driver in use: lpfc
        Kernel modules: lpfc