Comment 19 for bug 157213

Here are the requested outputs. This is with xorg-server 1.3, xrandr 1.2.2, intel driver 1.7.4. The video BIOS patched to support the 1400x1050 mode I needed. It's working fine with this combination. If you need the outputs with newer driver version please let me know, and I install the new driver again.

hu3cs41c ~ # ddcprobe
VESA 3.0 detected.
OEM Name: Intel(r)852GM/852GME/855GM/855GME Graphics Chip Accelerated VGA BIOS
Vendor Name: Intel Corporation
Product Name: Intel(r)852GM/852GME/855GM/855GME Graphics Controller
Product Revision: Hardware Version 0.0
Memory installed = 192 * 64k blocks = 12288kb
Supported standard modes:
        1280x1024x256
        1280x1024x64k
        1280x1024x16m
        1024x768x256
        1024x768x64k
        1024x768x16m
        640x480x16m
        800x600x64k
        800x600x16m
        640x480x256
        800x600x256
        640x480x64k
EDID read failed. (No DDC-capable monitor attached?)
hu3cs41c ~ # logout
andrewjr@hu3cs41c ~ $ xrandr --verbose
Screen 0: minimum 1280 x 1024, current 1400 x 1050, maximum 1400 x 1050
default connected 1400x1050+0+0 (0x54) normal (normal left inverted right) 0mm x 0mm
        Identifier: 0x53
        Timestamp: -498900606
        Subpixel: unknown
        Clones:
        CRTC: 0
        CRTCs: 0
  1400x1050 (0x54) 88.2MHz
        h: width 1400 start 0 end 0 total 1400 skew 0 clock 63.0KHz
        v: height 1050 start 0 end 0 total 1050 clock 60.0Hz
  1280x1024 (0x55) 78.6MHz
        h: width 1280 start 0 end 0 total 1280 skew 0 clock 61.4KHz
        v: height 1024 start 0 end 0 total 1024 clock 60.0Hz