Specs: FORM FACTOR FRONT PANEL • Shuttle Form Factor • (2) USB ports • Shuttle G2 Chassis • (1) Mini FireWire 400 port • (1) Mic-In, Speaker-Out, Line-in PROCESSOR • (1) Power button • Intel Pentium® 4, Celeron® D socket • (1) Reset button 478 processors. 533/800MHz FSB BACK PANEL CHIPSETS • (1) VGA port • North Bridge: Intel 865G • (1) Serial port • South Bridge: Intel ICH5 • (1) FireWire 400 port • (4) USB 2.0 ports MEMORY • (1) RJ45 Ethernet port • (2) 184pin dual-channel DDR • (1) AGP slot 266/333/400 • (1) PCI slot SDRAM • (1) PS/2 Keyboard port • Maximum up to 1GB per DIMM • (1) PS/2 Mouse port • (1) Fiber SPDIF_In connector VGA • (1) Fiber SPDIF_Out connector • On Board VGA : Intel Extreme • 5.1 Analog Audio connectors Graphics II • Support AGP 4x/8x EXTENSION BAY • (1) 3.5” bay AUDIO • (1) 3.5” bay (Hidden) • 5.1 channel AC97 audio • (1) 5.25” bay • Digital SPDIF I/O DIMENSION FAST ETHERNET • 300(L) x 200(W) x 185(H) mm • Fast 10/100 Ethernet • Supports Wake-On-LAN function POWER • 250W active PFC IEEE1394 • Input: 110 / 240V AC • VIA VT6307 • EMI Certified: FCC, CE, BSMI • Support 400Mb/s,200Mb/s, and 100Mb/s • Safety Certified: UL, TUV, CB data transfer rate • Power Cord: Depends on specific region demand ONBOARD CONNECTORS • (2) ATA100 IDE headers ACCESSORIES • (2) SATA 150 headers • (1) Shuttle ICE Thermal Module • (1) Floppy connector • (1) FDD Cable • (1) CD_in header • (1) HDD Cable • (1) SPDIF In/Out header • (1) Power Cord • (1) IR header • (1) Driver CD • (2) 1x5 USB 2.0 headers • (1) Mainboard Manual • (1) Printer port header • (1) Installation Guide • (1) Shuttle Extras CD
Using a command-line login, I remedied this boo-boo by deleting all the generated "wacom" entries from xorg.conf.
Specs:
• (1) Mic-In, Speaker-Out, Line-in
BACK PANEL
• (4) USB 2.0 ports
• (1) Fiber SPDIF_In connector
• (1) 3.5” bay
DIMENSION
• 250W active PFC
demand
• (1) Shuttle Extras CD
FORM FACTOR FRONT PANEL
• Shuttle Form Factor • (2) USB ports
• Shuttle G2 Chassis • (1) Mini FireWire 400 port
PROCESSOR • (1) Power button
• Intel Pentium® 4, Celeron® D socket • (1) Reset button
478 processors. 533/800MHz FSB
CHIPSETS • (1) VGA port
• North Bridge: Intel 865G • (1) Serial port
• South Bridge: Intel ICH5 • (1) FireWire 400 port
MEMORY • (1) RJ45 Ethernet port
• (2) 184pin dual-channel DDR • (1) AGP slot
266/333/400 • (1) PCI slot
SDRAM • (1) PS/2 Keyboard port
• Maximum up to 1GB per DIMM • (1) PS/2 Mouse port
VGA • (1) Fiber SPDIF_Out connector
• On Board VGA : Intel Extreme • 5.1 Analog Audio connectors
Graphics II
• Support AGP 4x/8x EXTENSION BAY
AUDIO • (1) 3.5” bay (Hidden)
• 5.1 channel AC97 audio • (1) 5.25” bay
• Digital SPDIF I/O
FAST ETHERNET • 300(L) x 200(W) x 185(H) mm
• Fast 10/100 Ethernet
• Supports Wake-On-LAN function POWER
IEEE1394 • Input: 110 / 240V AC
• VIA VT6307 • EMI Certified: FCC, CE, BSMI
• Support 400Mb/s,200Mb/s, and 100Mb/s • Safety Certified: UL, TUV, CB
data transfer rate • Power Cord: Depends on specific region
ONBOARD CONNECTORS
• (2) ATA100 IDE headers ACCESSORIES
• (2) SATA 150 headers • (1) Shuttle ICE Thermal Module
• (1) Floppy connector • (1) FDD Cable
• (1) CD_in header • (1) HDD Cable
• (1) SPDIF In/Out header • (1) Power Cord
• (1) IR header • (1) Driver CD
• (2) 1x5 USB 2.0 headers • (1) Mainboard Manual
• (1) Printer port header • (1) Installation Guide
Using a command-line login, I remedied this boo-boo by deleting all the generated "wacom" entries from xorg.conf.