Ubuntu
xorg package

Cannot setup resolution higher than 1024x768 on laptop with ATI Mobility Radeon card

Bug #115968 reported by Oleksiy Kokachev
4
Affects Status Importance Assigned to Milestone
X.Org X server
Fix Released
Medium
xorg (Ubuntu)
Invalid
Medium
Unassigned

Bug Description

Binary package hint: xorg

The problem is: I cannot setup resolutions higher than 1024x768 on my SVGA+ laptop LCD neither using fglrx nor ati drivers. I have ATI mobility Radeon 9600 M10. I tried to investigate this problem by myself, and found, that VBE incorrectly reports maximum resolution in c ase of fglrx and ati driver cannot correctly read resolution data using DDC, even if ddcprobe reports correct values. How can I skip validation of modes by VBE? Any other ideas?
============= ddcprobe===============
vbe: VESA 2.0 detected.
oem: ATI MOBILITY RADEON 9600
memory: 65536kb
mode: 320x200x32k
mode: 320x200x64k
mode: 320x200x16m
mode: 1600x1200x256
mode: 640x400x256
mode: 640x480x256
mode: 640x480x32k
mode: 640x480x64k
mode: 640x480x16m
mode: 1600x1200x32k
mode: 800x600x256
mode: 800x600x32k
mode: 800x600x64k
mode: 800x600x16m
mode: 1600x1200x64k
mode: 1024x768x256
mode: 1024x768x32k
mode: 1024x768x64k
mode: 1024x768x16m
mode: 1280x1024x256
mode: 1280x1024x32k
mode: 1280x1024x64k
mode: 1280x1024x16m
edid:
edidfail
==============Xorg.0.log======================

X Window System Version 7.2.0
Release Date: 22 January 2007
X Protocol Version 11, Revision 0, Release 7.2
Build Operating System: Linux Ubuntu
Current Operating System: Linux notebook 2.6.20-15-generic #2 SMP Sun Apr 15 07:36:31 UTC 2007 i686
Build Date: 04 April 2007
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu May 10 22:22:18 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Универсальный монитор"
(**) | |-->Device "ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Configured Mouse"
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    Entry deleted from font path.
(**) FontPath set to:
    /usr/share/fonts/X11/misc,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    /usr/share/fonts/X11/misc,
    /usr/X11R6/lib/X11/fonts/misc,
    /usr/share/fonts/X11/cyrillic,
    /usr/share/fonts/X11/100dpi/:unscaled,
    /usr/share/fonts/X11/75dpi/:unscaled,
    /usr/share/fonts/X11/Type1,
    /usr/X11R6/lib/X11/fonts/Type1,
    /usr/share/fonts/X11/100dpi,
    /usr/share/fonts/X11/75dpi,
    /var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) RgbPath set to "/etc/X11/rgb"
(==) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is disabled
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81c92e0
(II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 1.1
    X.Org XInput driver : 0.7
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.1
(++) using VT number 7

(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 8086,3340 card 1043,184b rev 21 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 8086,3341 card 0000,0000 rev 21 class 06,04,00 hdr 01
(II) PCI: 00:1d:0: chip 8086,24c2 card 1043,1848 rev 03 class 0c,03,00 hdr 80
(II) PCI: 00:1d:1: chip 8086,24c4 card 1043,1848 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:2: chip 8086,24c7 card 1043,1848 rev 03 class 0c,03,00 hdr 00
(II) PCI: 00:1d:7: chip 8086,24cd card 1043,184a rev 03 class 0c,03,20 hdr 00
(II) PCI: 00:1e:0: chip 8086,2448 card 0000,0000 rev 83 class 06,04,00 hdr 01
(II) PCI: 00:1f:0: chip 8086,24cc card 0000,0000 rev 03 class 06,01,00 hdr 80
(II) PCI: 00:1f:1: chip 8086,24ca card 1043,1848 rev 03 class 01,01,8a hdr 00
(II) PCI: 00:1f:3: chip 8086,24c3 card 1043,1848 rev 03 class 0c,05,00 hdr 00
(II) PCI: 00:1f:5: chip 8086,24c5 card 1043,10d3 rev 03 class 04,01,00 hdr 00
(II) PCI: 00:1f:6: chip 8086,24c6 card 1043,1826 rev 03 class 07,03,00 hdr 00
(II) PCI: 01:00:0: chip 1002,4e50 card 1043,1772 rev 00 class 03,00,00 hdr 00
(II) PCI: 02:00:0: chip 10ec,8139 card 1043,1045 rev 10 class 02,00,00 hdr 00
(II) PCI: 02:04:0: chip 8086,4220 card 8086,2701 rev 05 class 02,80,00 hdr 00
(II) PCI: 02:05:0: chip 1180,0476 card d000,0000 rev ac class 06,07,00 hdr 82
(II) PCI: 02:05:1: chip 1180,0476 card dc00,0000 rev ac class 06,07,00 hdr 82
(II) PCI: 02:05:2: chip 1180,0552 card 1043,1847 rev 04 class 0c,00,10 hdr 80
(II) PCI: End of PCI scan
(II) Intel Bridge workaround enabled
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,7), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 1 I/O range:
    [0] -1 0 0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xff800000 - 0xff8fffff (0x100000) MX[B]
(II) Bus 1 prefetchable memory range:
    [0] -1 0 0xce900000 - 0xde9fffff (0x10100000) MX[B]
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,10), BCTRL: 0x0006 (VGA_EN is cleared)
(II) Bus 2 I/O range:
    [0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
    [2] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [3] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0xff900000 - 0xff9fffff (0x100000) MX[B]
(II) Bus 2 prefetchable memory range:
    [0] -1 0 0xdea00000 - 0xdeafffff (0x100000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:31:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-CardBus bridge:
(II) Bus 3: bridge is at (2:5:0), (2,3,6), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 3 I/O range:
    [0] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[B]
    [1] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[B]
(II) PCI-to-CardBus bridge:
(II) Bus 7: bridge is at (2:5:1), (2,7,10), BCTRL: 0x0580 (VGA_EN is cleared)
(II) Bus 7 I/O range:
    [0] -1 0 0x0000dc00 - 0x0000dcff (0x100) IX[B]
(--) PCI:*(1:0:0) ATI Technologies Inc RV350 [Mobility Radeon 9600 M10] rev 0, Mem @ 0xd0000000/27, 0xff8f0000/16, I/O @ 0xc800/8, BIOS @ 0xff8c0000/17
(II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xefffffff to 0xdfffffff
(II) Active PCI resource ranges:
    [0] -1 0 0xff9ff000 - 0xff9ff7ff (0x800) MX[B]
    [1] -1 0 0xff9fe000 - 0xff9fefff (0x1000) MX[B]
    [2] -1 0 0xff9ffc00 - 0xff9ffcff (0x100) MX[B]
    [3] -1 0 0xffaff400 - 0xffaff4ff (0x100) MX[B]
    [4] -1 0 0xffaff800 - 0xffaff9ff (0x200) MX[B]
    [5] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
    [6] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
    [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [8] -1 0 0xff8c0000 - 0xff8dffff (0x20000) MX[B](B)
    [9] -1 0 0xff8f0000 - 0xff8fffff (0x10000) MX[B](B)
    [10] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [11] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [12] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]
    [13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
    [14] -1 0 0x00001100 - 0x0000113f (0x40) IX[B]
    [15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [16] -1 0 0x00000540 - 0x0000055f (0x20) IX[B]
    [17] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [22] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
    [23] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
    [24] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [25] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xff9ff000 - 0xff9ff7ff (0x800) MX[B]
    [1] -1 0 0xff9fe000 - 0xff9fefff (0x1000) MX[B]
    [2] -1 0 0xff9ffc00 - 0xff9ffcff (0x100) MX[B]
    [3] -1 0 0xffaff400 - 0xffaff4ff (0x100) MX[B]
    [4] -1 0 0xffaff800 - 0xffaff9ff (0x200) MX[B]
    [5] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
    [6] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
    [7] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [8] -1 0 0xff8c0000 - 0xff8dffff (0x20000) MX[B](B)
    [9] -1 0 0xff8f0000 - 0xff8fffff (0x10000) MX[B](B)
    [10] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [11] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [12] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]
    [13] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
    [14] -1 0 0x00001100 - 0x0000113f (0x40) IX[B]
    [15] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [16] -1 0 0x00000540 - 0x0000055f (0x20) IX[B]
    [17] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [18] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [19] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [20] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [21] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [22] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
    [23] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
    [24] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [25] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xff9ff000 - 0xff9ff7ff (0x800) MX[B]
    [5] -1 0 0xff9fe000 - 0xff9fefff (0x1000) MX[B]
    [6] -1 0 0xff9ffc00 - 0xff9ffcff (0x100) MX[B]
    [7] -1 0 0xffaff400 - 0xffaff4ff (0x100) MX[B]
    [8] -1 0 0xffaff800 - 0xffaff9ff (0x200) MX[B]
    [9] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
    [10] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
    [11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [12] -1 0 0xff8c0000 - 0xff8dffff (0x20000) MX[B](B)
    [13] -1 0 0xff8f0000 - 0xff8fffff (0x10000) MX[B](B)
    [14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [18] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]
    [19] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
    [20] -1 0 0x00001100 - 0x0000113f (0x40) IX[B]
    [21] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [22] -1 0 0x00000540 - 0x0000055f (0x20) IX[B]
    [23] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [28] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
    [29] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
    [30] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [31] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) LoadModule: "i2c"
(II) Loading /usr/lib/xorg/modules//libi2c.so
(II) Module i2c: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "ddc"
(II) Loading /usr/lib/xorg/modules//libddc.so
(II) Module ddc: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
    compiled for 7.2.0 , module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 7.2.0, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.1.0
    ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 6.6.3
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.1.0
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor=" X.Org Foundation"
    compiled for 7.2.0, module version = 1.1.1
    Module class: X.Org XInput Driver
    ABI class: X.Org XInput driver, version 0.7
(II) ATI: ATI driver (version 6.6.3) for chipsets: ati, ativga
(II) R128: Driver for ATI Rage 128 chipsets:
    ATI Rage 128 Mobility M3 LE (PCI), ATI Rage 128 Mobility M3 LF (AGP),
    ATI Rage 128 Mobility M4 MF (AGP), ATI Rage 128 Mobility M4 ML (AGP),
    ATI Rage 128 Pro GL PA (AGP?), ATI Rage 128 Pro GL PB (AGP?),
    ATI Rage 128 Pro GL PC (AGP?), ATI Rage 128 Pro GL PD (PCI),
    ATI Rage 128 Pro GL PE (AGP?), ATI Rage 128 Pro GL PF (AGP),
    ATI Rage 128 Pro VR PG (AGP?), ATI Rage 128 Pro VR PH (AGP?),
    ATI Rage 128 Pro VR PI (AGP?), ATI Rage 128 Pro VR PJ (AGP?),
    ATI Rage 128 Pro VR PK (AGP?), ATI Rage 128 Pro VR PL (AGP?),
    ATI Rage 128 Pro VR PM (AGP?), ATI Rage 128 Pro VR PN (AGP?),
    ATI Rage 128 Pro VR PO (AGP?), ATI Rage 128 Pro VR PP (PCI),
    ATI Rage 128 Pro VR PQ (AGP?), ATI Rage 128 Pro VR PR (PCI),
    ATI Rage 128 Pro VR PS (AGP?), ATI Rage 128 Pro VR PT (AGP?),
    ATI Rage 128 Pro VR PU (AGP?), ATI Rage 128 Pro VR PV (AGP?),
    ATI Rage 128 Pro VR PW (AGP?), ATI Rage 128 Pro VR PX (AGP?),
    ATI Rage 128 GL RE (PCI), ATI Rage 128 GL RF (AGP),
    ATI Rage 128 RG (AGP), ATI Rage 128 VR RK (PCI),
    ATI Rage 128 VR RL (AGP), ATI Rage 128 4X SE (AGP?),
    ATI Rage 128 4X SF (AGP?), ATI Rage 128 4X SG (AGP?),
    ATI Rage 128 4X SH (AGP?), ATI Rage 128 4X SK (AGP?),
    ATI Rage 128 4X SL (AGP?), ATI Rage 128 4X SM (AGP),
    ATI Rage 128 4X SN (AGP?), ATI Rage 128 Pro ULTRA TF (AGP),
    ATI Rage 128 Pro ULTRA TL (AGP), ATI Rage 128 Pro ULTRA TR (AGP),
    ATI Rage 128 Pro ULTRA TS (AGP?), ATI Rage 128 Pro ULTRA TT (AGP?),
    ATI Rage 128 Pro ULTRA TU (AGP?)
(II) RADEON: Driver for ATI Radeon chipsets: ATI Radeon QD (AGP),
    ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    ATI Radeon VE/7000 QY (AGP/PCI), ATI Radeon VE/7000 QZ (AGP/PCI),
    ATI ES1000 515E (PCI), ATI ES1000 5969 (PCI),
    ATI Radeon Mobility M7 LW (AGP),
    ATI Mobility FireGL 7800 M7 LX (AGP),
    ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    ATI Radeon IGP320 (A3) 4136, ATI Radeon IGP320M (U1) 4336,
    ATI Radeon IGP330/340/350 (A4) 4137,
    ATI Radeon IGP330M/340M/350M (U2) 4337,
    ATI Radeon 7000 IGP (A4+) 4237, ATI Radeon Mobility 7000 IGP 4437,
    ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    ATI Radeon 9100 QM (AGP), ATI Radeon 8500 AIW BB (AGP),
    ATI Radeon 8500 AIW BC (AGP), ATI Radeon 7500 QW (AGP/PCI),
    ATI Radeon 7500 QX (AGP/PCI), ATI Radeon 9000/PRO If (AGP/PCI),
    ATI Radeon 9000 Ig (AGP/PCI), ATI FireGL Mobility 9000 (M9) Ld (AGP),
    ATI Radeon Mobility 9000 (M9) Lf (AGP),
    ATI Radeon Mobility 9000 (M9) Lg (AGP),
    ATI Radeon 9100 IGP (A5) 5834,
    ATI Radeon Mobility 9100 IGP (U3) 5835, ATI Radeon 9100 PRO IGP 7834,
    ATI Radeon Mobility 9200 IGP 7835, ATI Radeon 9250 5960 (AGP),
    ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    ATI Radeon Mobility 9200 (M9+) 5C63 (AGP), ATI Radeon 9500 AD (AGP),
    ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    ATI FireGL Z1 AG (AGP), ATI Radeon 9700 Pro ND (AGP),
    ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    ATI FireGL X1 NG (AGP), ATI Radeon 9600 AP (AGP),
    ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP),
    ATI FireGL RV360 AV (AGP),
    ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    ATI Radeon Mobility 9600 (M10) NQ (AGP),
    ATI Radeon Mobility 9600 (M11) NR (AGP),
    ATI Radeon Mobility 9600 (M10) NS (AGP),
    ATI FireGL Mobility T2 (M10) NT (AGP),
    ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon 9650,
    ATI Radeon 9800SE AH (AGP), ATI Radeon 9800 AI (AGP),
    ATI Radeon 9800 AJ (AGP), ATI FireGL X2 AK (AGP),
    ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
    ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
    ATI Radeon X600 (RV380) 3E50 (PCIE),
    ATI FireGL V3200 (RV380) 3E54 (PCIE),
    ATI Radeon Mobility X600 (M24) 3150 (PCIE),
    ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X300 (RV370) 5B60 (PCIE),
    ATI Radeon X600 (RV370) 5B62 (PCIE),
    ATI Radeon X550 (RV370) 5B63 (PCIE),
    ATI FireGL V3100 (RV370) 5B64 (PCIE),
    ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    ATI FireGL M22 GL 5464 (PCIE), ATI Radeon XPRESS 200 5A41 (PCIE),
    ATI Radeon XPRESS 200M 5A42 (PCIE),
    ATI Radeon XPRESS 200 5A61 (PCIE),
    ATI Radeon XPRESS 200M 5A62 (PCIE),
    ATI Radeon XPRESS 200 5954 (PCIE),
    ATI Radeon XPRESS 200M 5955 (PCIE),
    ATI Radeon XPRESS 200 5974 (PCIE),
    ATI Radeon XPRESS 200M 5975 (PCIE), ATI FireGL V5000 (RV410) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility FireGL V5000 (M26) (PCIE),
    ATI Mobility Radeon X700 XL (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Mobility Radeon X700 (M26) (PCIE),
    ATI Radeon X700 PRO (RV410) (PCIE),
    ATI Radeon X700 XT (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 SE (RV410) (PCIE),
    ATI Radeon X800 (R420) JH (AGP), ATI Radeon X800PRO (R420) JI (AGP),
    ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    ATI Radeon Mobility 9800 (M18) JN (AGP),
    ATI Radeon X800XT (R420) JP (AGP), ATI Radeon X800 SE (R420) (AGP),
    ATI Radeon AIW X800 VE (R420) JT (AGP),
    ATI Radeon X800 (R423) UH (PCIE),
    ATI Radeon X800PRO (R423) UI (PCIE),
    ATI Radeon X800LE (R423) UJ (PCIE),
    ATI Radeon X800SE (R423) UK (PCIE),
    ATI FireGL V5100 (R423) UQ (PCIE),
    ATI FireGL unknown (R423) UR (PCIE),
    ATI FireGL unknown (R423) UT (PCIE),
    ATI Radeon X800XT (R423) 5D57 (PCIE), ATI FireGL V7100 (R423) (PCIE),
    ATI Mobility FireGL V5100 (M28) (PCIE),
    ATI Mobility Radeon X800 (M28) (PCIE),
    ATI Mobility Radeon X800 XT (M28) (PCIE),
    ATI Radeon X800 (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 XTP (R430) (PCIE),
    ATI Radeon X850 5D4C (PCIE),
    ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    ATI Radeon X850 XT (R480) (PCIE),
    ATI Radeon X850 XT PE (R480) (PCIE),
    ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP)
(II) Primary Device is: PCI 01:00:0
(II) ATI: Candidate "Device" section "ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]".
(--) Chipset ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP) found
(II) resource ranges after xf86ClaimFixedResources() call:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xff9ff000 - 0xff9ff7ff (0x800) MX[B]
    [5] -1 0 0xff9fe000 - 0xff9fefff (0x1000) MX[B]
    [6] -1 0 0xff9ffc00 - 0xff9ffcff (0x100) MX[B]
    [7] -1 0 0xffaff400 - 0xffaff4ff (0x100) MX[B]
    [8] -1 0 0xffaff800 - 0xffaff9ff (0x200) MX[B]
    [9] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
    [10] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
    [11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [12] -1 0 0xff8c0000 - 0xff8dffff (0x20000) MX[B](B)
    [13] -1 0 0xff8f0000 - 0xff8fffff (0x10000) MX[B](B)
    [14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [15] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [16] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [17] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [18] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]
    [19] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
    [20] -1 0 0x00001100 - 0x0000113f (0x40) IX[B]
    [21] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [22] -1 0 0x00000540 - 0x0000055f (0x20) IX[B]
    [23] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [24] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [25] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [26] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [27] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [28] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
    [29] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
    [30] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [31] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
(II) Loading sub module "radeon"
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 4.2.0
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 1.1
(II) resource ranges after probing:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [4] -1 0 0xff9ff000 - 0xff9ff7ff (0x800) MX[B]
    [5] -1 0 0xff9fe000 - 0xff9fefff (0x1000) MX[B]
    [6] -1 0 0xff9ffc00 - 0xff9ffcff (0x100) MX[B]
    [7] -1 0 0xffaff400 - 0xffaff4ff (0x100) MX[B]
    [8] -1 0 0xffaff800 - 0xffaff9ff (0x200) MX[B]
    [9] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
    [10] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
    [11] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [12] -1 0 0xff8c0000 - 0xff8dffff (0x20000) MX[B](B)
    [13] -1 0 0xff8f0000 - 0xff8fffff (0x10000) MX[B](B)
    [14] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [15] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
    [16] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
    [17] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
    [18] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [19] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [20] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [21] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]
    [22] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
    [23] -1 0 0x00001100 - 0x0000113f (0x40) IX[B]
    [24] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [25] -1 0 0x00000540 - 0x0000055f (0x20) IX[B]
    [26] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [27] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [28] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [29] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [30] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [31] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
    [32] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
    [33] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [34] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
    [35] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
    [36] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(**) RADEON(0): RADEONPreInit
(II) RADEON(0): MMIO registers at 0xff8f0000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(**) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(II) RADEON(0): Assuming overlay scaler buffer width is 1536
(==) RADEON(0): X server will not keep DPI constant for all screen sizes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) RADEON(0): initializing int10
(II) Loading sub module "vm86"
(II) LoadModule: "vm86"
(II) Loading /usr/lib/xorg/modules//libvm86.so
(II) Module vm86: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP)" (ChipID = 0x4e50)
(--) RADEON(0): Linear framebuffer at 0xd0000000
(--) RADEON(0): BIOS at 0xff8c0000
(II) RADEON(0): AGP card detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.25.0
(II) RADEON(0): AGP Fast Write disabled by default
(II) Loading sub module "shadowfb"
(II) LoadModule: "shadowfb"
(II) Loading /usr/lib/xorg/modules//libshadowfb.so
(II) Module shadowfb: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
(II) RADEON(0): Page flipping disabled
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=65536K, accessible=131072K (PCI BAR=131072K)
(--) RADEON(0): Mapped VideoRAM: 65536 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Reloading /usr/lib/xorg/modules//libi2c.so
(II) RADEON(0): I2C bus "DDC" initialized.
(II) RADEON(0): Legacy BIOS detected
(II) RADEON(0): LVDS port is not in connector table, added in.
(II) RADEON(0): Connector0: DDCType-0, DACType-1, TMDSType--1, ConnectorType-1
(II) RADEON(0): Connector1: DDCType-3, DACType-0, TMDSType--1, ConnectorType-2
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): I2C device "DDC:ddc2" registered at address 0xA0.
(II) RADEON(0): I2C device "DDC:ddc2" removed.
(II) RADEON(0): VBE DDC probing on port 1 :::
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): VESA BIOS detected
(II) RADEON(0): VESA VBE Version 2.0
(II) RADEON(0): VESA VBE Total Mem: 65536 kB
(II) RADEON(0): VESA VBE OEM: ATI MOBILITY RADEON 9600
(II) RADEON(0): VESA VBE OEM Software Rev: 1.0
(II) RADEON(0): VESA VBE OEM Vendor: ATI Technologies Inc.
(II) RADEON(0): VESA VBE OEM Product: P11
(II) RADEON(0): VESA VBE OEM Product Rev: 01.00
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) RADEON(0): VESA VBE DDC supported
(II) RADEON(0): VESA VBE DDC Level none
(II) RADEON(0): VESA VBE DDC transfer in appr. 2 sec.
(II) RADEON(0): VESA VBE DDC read failed
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(WW) RADEON(0): No valid DDCType is given for DDC2, try vbe probing ...
(II) RADEON(0): DDC Type: 0, Detected Type: 0
(II) RADEON(0):
(II) RADEON(0): Primary:
 Monitor -- LVDS
 Connector -- VGA
 DAC Type -- Primary
 TMDS Type -- NONE
 DDC Type -- VGA_DDC
(II) RADEON(0): Secondary:
 Monitor -- NONE
 Connector -- Proprietary
 DAC Type -- TVDAC/ExtDAC
 TMDS Type -- NONE
 DDC Type -- NONE
(II) RADEON(0): PLL parameters: rf=2700 rd=6 min=20000 max=40000; xclk=22300
(WW) RADEON(0): Failed to detect secondary monitor, MergedFB/Clone mode disabled
(==) RADEON(0): Using gamma correction ( 1.0, 1.0, 1.0)
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Panel ID string: 1024x768
(II) RADEON(0): Panel Size from BIOS: 1024x768
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(WW) RADEON(0): Mode 1280x1024 is out of range.
(WW) RADEON(0): Valid modes must be between 320x200-1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 800x600
(II) RADEON(0): Valid mode using on-chip RMX: 640x480
(II) RADEON(0): Total number of valid FP mode(s) found: 3
(--) RADEON(0): Virtual size is 1024x768 (pitch 1024)
(**) RADEON(0): *Mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1024x768" 65.00 1024 1040 1176 1344 768 770 776 806
(**) RADEON(0): *Mode "800x600": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "800x600" 65.00 800 1040 1176 1344 600 770 776 806
(**) RADEON(0): *Mode "640x480": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x480" 65.00 640 1040 1176 1344 480 770 776 806
(**) RADEON(0): Default mode "320x175": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "320x175" 65.00 320 1040 1176 1344 175 770 776 806
(**) RADEON(0): Default mode "320x200": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "320x200" 65.00 320 1040 1176 1344 200 770 776 806
(**) RADEON(0): Default mode "360x200": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "360x200" 65.00 360 1040 1176 1344 200 770 776 806
(**) RADEON(0): Default mode "320x240": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "320x240" 65.00 320 1040 1176 1344 240 770 776 806
(**) RADEON(0): Default mode "400x300": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "400x300" 65.00 400 1040 1176 1344 300 770 776 806
(**) RADEON(0): Default mode "512x384": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "512x384" 65.00 512 1040 1176 1344 384 770 776 806
(**) RADEON(0): Default mode "576x432": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "576x432" 65.00 576 1040 1176 1344 432 770 776 806
(**) RADEON(0): Default mode "640x512": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "640x512" 65.00 640 1040 1176 1344 512 770 776 806
(**) RADEON(0): Default mode "832x624": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) RADEON(0): Modeline "832x624" 65.00 832 1040 1176 1344 624 770 776 806
(==) RADEON(0): DPI set to (75, 75)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/lib/xorg/modules//libramdac.so
(II) Module ramdac: vendor=" X.Org Foundation"
    compiled for 7.2.0, module version = 0.1.0
    ABI class: X.Org Video Driver, version 1.1
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.2.0
    ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): No MM_TABLE found - assuming CARD is not TV-in capable.
(!!) RADEON(0): For information on using the multimedia capabilities
    of this adapter, please see http://gatos.sf.net .
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
    [0] 0 0 0xff8f0000 - 0xff8fffff (0x10000) MX[B]
    [1] 0 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B]
    [2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
    [3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
    [4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
    [5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
    [6] -1 0 0xff9ff000 - 0xff9ff7ff (0x800) MX[B]
    [7] -1 0 0xff9fe000 - 0xff9fefff (0x1000) MX[B]
    [8] -1 0 0xff9ffc00 - 0xff9ffcff (0x100) MX[B]
    [9] -1 0 0xffaff400 - 0xffaff4ff (0x100) MX[B]
    [10] -1 0 0xffaff800 - 0xffaff9ff (0x200) MX[B]
    [11] -1 0 0x50000000 - 0x500003ff (0x400) MX[B]
    [12] -1 0 0xffaffc00 - 0xffafffff (0x400) MX[B]
    [13] -1 0 0xe0000000 - 0xdfffffff (0x0) MX[B]O
    [14] -1 0 0xff8c0000 - 0xff8dffff (0x20000) MX[B](B)
    [15] -1 0 0xff8f0000 - 0xff8fffff (0x10000) MX[B](B)
    [16] -1 0 0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
    [17] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprU)
    [18] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprU)
    [19] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprU)
    [20] 0 0 0x0000c800 - 0x0000c8ff (0x100) IX[B]
    [21] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
    [22] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
    [23] -1 0 0x0000d800 - 0x0000d8ff (0x100) IX[B]
    [24] -1 0 0x0000e080 - 0x0000e0ff (0x80) IX[B]
    [25] -1 0 0x0000e400 - 0x0000e4ff (0x100) IX[B]
    [26] -1 0 0x00001100 - 0x0000113f (0x40) IX[B]
    [27] -1 0 0x00001000 - 0x000010ff (0x100) IX[B]
    [28] -1 0 0x00000540 - 0x0000055f (0x20) IX[B]
    [29] -1 0 0x0000ffa0 - 0x0000ffaf (0x10) IX[B]
    [30] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [31] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [32] -1 0 0x000001f0 - 0x000001f0 (0x1) IX[B]
    [33] -1 0 0x000001f0 - 0x000001f7 (0x8) IX[B]
    [34] -1 0 0x0000ec00 - 0x0000ec1f (0x20) IX[B]
    [35] -1 0 0x0000e880 - 0x0000e89f (0x20) IX[B]
    [36] -1 0 0x0000e800 - 0x0000e81f (0x20) IX[B]
    [37] -1 0 0x0000c800 - 0x0000c8ff (0x100) IX[B](B)
    [38] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    [39] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(**) RADEON(0): RADEONScreenInit d0000000 0
(**) RADEON(0): Map: 0xd0000000, 0x04000000
(==) RADEON(0): Write-combining range (0xd0000000,0x4000000)
(**) RADEON(0): RADEONSave
(**) RADEON(0): RADEONSaveMode(0x81f50a0)
(**) RADEON(0): Read: 0x00200008 0x0002004d 0x01000000
(**) RADEON(0): Read: rd=8, fd=77, pd=2
(**) RADEON(0): RADEONSaveMode returns 0x81f50a0
(II) RADEON(0): Dynamic Clock Scaling Disabled
(==) RADEON(0): Using 24 bit depth buffer
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [drm] DRM interface version 1.3
(II) RADEON(0): [drm] created "radeon" driver at busid "pci:0000:01: 00.0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xf8d8a000
(II) RADEON(0): [drm] mapped SAREA 0xf8d8a000 to 0xb7c3e000
(II) RADEON(0): [drm] framebuffer handle = 0xd0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x1f000201 [AGP 0x8086/0x3340; Card 0x1002/0x4e50]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xe0000000
(II) RADEON(0): [agp] Ring mapped at 0xb386a000
(II) RADEON(0): [agp] ring read ptr handle = 0xe0101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0xb3869000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xe0102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0xb3669000
(II) RADEON(0): [agp] GART texture map handle = 0xe0302000
(II) RADEON(0): [agp] GART Texture map mapped at 0xb3189000
(II) RADEON(0): [drm] register handle = 0xff8f0000
(II) RADEON(0): [dri] Visual configs initialized
(**) RADEON(0): DRI New memory map param
(**) RADEON(0): RADEONInitMemoryMap() :
(**) RADEON(0): mem_size : 0x04000000
(**) RADEON(0): MC_FB_LOCATION : 0xd3ffd000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): RADEONModeInit()
1024x768 65.00 1024 1040 1176 1344 768 770 776 806 (24,32)
1024x768 65.00 1024 1040 1176 1344 768 770 776 806 (24,32)
(**) RADEON(0): Pitch = 8388736 bytes (virtualX = 1024, displayWidth = 1024)
(II) RADEON(0): BIOS HotKeys Enabled
(**) RADEON(0): RADEONInit returns 0x81f5a50
(**) RADEON(0): RADEONRestoreMode()
(**) RADEON(0): RADEONRestoreMode(0x81f5a50)
(**) RADEON(0): RADEONRestoreMemMapRegisters() :
(**) RADEON(0): MC_FB_LOCATION : 0xd3ffd000
(**) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(**) RADEON(0): Map Changed ! Applying ...
(**) RADEON(0): Map applied, resetting engine ...
(**) RADEON(0): Updating display base addresses...
(**) RADEON(0): Memory map updated.
(**) RADEON(0): Programming CRTC1, offset: 0x00000000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30097c7c to 20167c7c
(**) RADEON(0): RADEONSaveScreen(0)
(II) RADEON(0): Depth moves disabled by default
(**) RADEON(0): Setting up initial surfaces
(**) RADEON(0): Initializing fb layer
(**) RADEON(0): Setting up accel memmap
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Will use back buffer at offset 0xc00000
(II) RADEON(0): Will use depth buffer at offset 0xf00000
(II) RADEON(0): Will use 47104 kb for textures at offset 0x1200000
(**) RADEON(0): Initializing backing store
(==) RADEON(0): Backing store disabled
(**) RADEON(0): DRI Finishing init !
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 11
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xd3ffd000 is: 0xd3ffd000
(WW) RADEON(0): MC_AGP_LOCATION was: 0xffffffc0 is: 0xe07fe000
(**) RADEON(0): GRPH_BUFFER_CNTL from 30097c7c to 20167c7c
(II) RADEON(0): Direct rendering enabled
(**) RADEON(0): Setting up final surfaces
(**) RADEON(0): Initializing Acceleration
(II) RADEON(0): Render acceleration unsupported on Radeon 9500/9700 and newer.
(II) RADEON(0): Render acceleration disabled
(**) RADEON(0): EngineInit (32/32)
(**) RADEON(0): Pitch for acceleration = 128
(**) RADEON(0): EngineRestore (32/32)
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
    Screen to screen bit blits
    Solid filled rectangles
    8x8 mono pattern filled rectangles
    Indirect CPU to Screen color expansion
    Solid Lines
    Scanline Image Writes
    Offscreen Pixmaps
    Setting up tile and stipple cache:
        32 128x128 slots
        32 256x256 slots
        16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) RADEON(0): Initializing DPMS
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(**) RADEON(0): Initializing Cursor
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7417
(**) RADEON(0): Initializing color map
(**) RADEON(0): Initializing DGA
(**) RADEON(0): Initializing Xv
(II) RADEON(0): No video input capabilities detected and no information is provided - disabling multimedia i2c
(II) Loading sub module "theatre_detect"
(II) LoadModule: "theatre_detect"
(II) Loading /usr/lib/xorg/modules/multimedia//theatre_detect_drv.so
(II) Module theatre_detect: vendor="X.Org Foundation"
    compiled for 7.2.0, module version = 1.0.0
    ABI class: X.Org Video Driver, version 1.1
(II) RADEON(0): no multimedia table present, disabling Rage Theatre.
(**) RADEON(0): RADEONScreenInit finished
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 8, (OK)
drmOpenByBusid: drmOpenMinor returns 8
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(WW) AIGLX: 3D driver claims to not support visual 0x23
(WW) AIGLX: 3D driver claims to not support visual 0x24
(WW) AIGLX: 3D driver claims to not support visual 0x25
(WW) AIGLX: 3D driver claims to not support visual 0x26
(WW) AIGLX: 3D driver claims to not support visual 0x27
(WW) AIGLX: 3D driver claims to not support visual 0x28
(WW) AIGLX: 3D driver claims to not support visual 0x29
(WW) AIGLX: 3D driver claims to not support visual 0x2a
(WW) AIGLX: 3D driver claims to not support visual 0x2b
(WW) AIGLX: 3D driver claims to not support visual 0x2c
(WW) AIGLX: 3D driver claims to not support visual 0x2d
(WW) AIGLX: 3D driver claims to not support visual 0x2e
(WW) AIGLX: 3D driver claims to not support visual 0x2f
(WW) AIGLX: 3D driver claims to not support visual 0x30
(WW) AIGLX: 3D driver claims to not support visual 0x31
(WW) AIGLX: 3D driver claims to not support visual 0x32
(II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Generic Keyboard: Core Keyboard
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us,ua"
(**) Generic Keyboard: XkbLayout: "us,ua"
(**) Option "XkbVariant" ","
(**) Generic Keyboard: XkbVariant: ","
(**) Option "XkbOptions" "grp:ctrl_shift_toggle,lv3:ralt_switch,grp_led:scroll"
(**) Generic Keyboard: XkbOptions: "grp:ctrl_shift_toggle,lv3:ralt_switch,grp_led:scroll"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(**) Option "Protocol" "ImPS/2"
(**) Configured Mouse: Device: "/dev/input/mice"
(**) Configured Mouse: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Configured Mouse: Core Pointer
(**) Option "Device" "/dev/input/mice"
(**) Option "Emulate3Buttons" "true"
(**) Configured Mouse: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Configured Mouse: ZAxisMapping: buttons 4 and 5
(**) Configured Mouse: Buttons: 9
(II) XINPUT: Adding extended input device "Configured Mouse" (type: MOUSE)
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) Configured Mouse: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/misc, removing from list!
Could not init font path element /usr/share/fonts/X11/cyrillic, removing from list!
Could not init font path element /usr/X11R6/lib/X11/fonts/Type1, removing from list!
================= xorg.conf====================

# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf(5) manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "ServerLayout"

# Inputdevice "stylus" "SendCoreEvents"
# Inputdevice "cursor" "SendCoreEvents"
# Inputdevice "eraser" "SendCoreEvents"
    Identifier "Default Layout"
    Screen "Default Screen" 0 0
    InputDevice "Generic Keyboard"
    InputDevice "Configured Mouse"
EndSection

Section "Files"

    # path to defoma fonts
    FontPath "/usr/share/fonts/X11/misc"
    FontPath "/usr/share/fonts/X11/cyrillic"
    FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath "/usr/share/fonts/X11/Type1"
    FontPath "/usr/share/fonts/X11/100dpi"

See original description
Revision history for this message
In , Bryce Harrington (bryce) wrote :

On an ATI Mobility Radeon 9600 M10, xorg is not allowing higher resolutions, perhaps due to failure to detect DDC properly on this card. From the log:

(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Reloading /usr/lib/xorg/modules//libddc.so
(II) RADEON(0): VESA VBE DDC supported
(II) RADEON(0): VESA VBE DDC Level none
(II) RADEON(0): VESA VBE DDC transfer in appr. 2 sec.
(II) RADEON(0): VESA VBE DDC read failed
(II) RADEON(0): DDC Type: 3, Detected Type: 0
(WW) RADEON(0): No valid DDCType is given for DDC2, try vbe probing ...
(II) RADEON(0): DDC Type: 0, Detected Type: 0
...
(II) RADEON(0): Validating modes on Primary head ---------
(II) RADEON(0): Panel ID string: 1024x768
(II) RADEON(0): Panel Size from BIOS: 1024x768
(II) RADEON(0): BIOS provided dividers will be used.
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(WW) RADEON(0): Mode 1280x1024 is out of range.
(WW) RADEON(0): Valid modes must be between 320x200-1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 800x600
(II) RADEON(0): Valid mode using on-chip RMX: 640x480
(II) RADEON(0): Total number of valid FP mode(s) found: 3
(--) RADEON(0): Virtual size is 1024x768 (pitch 1024)

Oleksiy's report:
"The problem is: I cannot setup resolutions higher than 1024x768 on my SVGA+ laptop LCD neither using fglrx nor ati drivers. I have ATI mobility Radeon 9600 M10. I tried to investigate this problem by myself, and found, that VBE incorrectly reports maximum resolution in c ase of fglrx and ati driver cannot correctly read resolution data using DDC, even if ddcprobe reports correct values. How can I skip validation of modes by VBE? Any other ideas?"

Revision history for this message
In , Bryce Harrington (bryce) wrote :

Created an attachment (id=10090)
Xorg.0.log

Revision history for this message
In , Bryce Harrington (bryce) wrote :

Created an attachment (id=10091)
xorg.conf

Revision history for this message
In , Bryce Harrington (bryce) wrote :

Created an attachment (id=10092)
ddcprobe output

Revision history for this message
Bryce Harrington (bryce) wrote :

Thanks for reporting this bug. Looking at the log, I think you're right - somehow DDC is not getting properly detected for this hardware, and is limiting the available resolutions to 1024x768 or less. I've reported this problem upstream to Xorg.

Changed in xorg:
importance: Undecided → Medium
status: Unconfirmed → Confirmed
Revision history for this message
Freyr Gunnar Ólafsson (gnarlin) wrote :

I'm having the exact same problem on a desktop computer. I have in it a radeon x700 gfx card and I can't seem to get any resolution over 1024x768. I have tried to change the monitors horizsync and vertrefresh (since they seem to be slightly different from distro to distro) as well as adding the resolutions to xorg.conf. 1280x1024, 1280x960 work in MS Windows ;-/
The monitor is a medion 17 inch FH (4:3).
I tried both the binary blog driver from ATI as well as the free driver. I hope this helps.

Revision history for this message
In , Benjamin Herrenschmidt (benh-kernel) wrote :

Looks to me that the BIOS is claiming that it's a 1024x768 LVDS panel.. (that is, it explicit gives that resolution, not the lack of a resolution). So first, blame your laptop vendors for f*king up the BIOS infos (it probably comes with a hacked windows driver to work around the problem), then, do we still have the panel size overrides in xorg.conf ?

Revision history for this message
In , agd5f (agd5f) wrote :

As Ben said, try enabling the PanelSize option, e.g.,

Option "PanelSize" "1400x1050"

Revision history for this message
In , Oleksiy Kokachev (lelikv) wrote :

I already tried to do that, but as a result my LCD is blinking and looks like my physical display with 1024x768 is a part of bigger display with 1280x1024. I.e. only some part of 1280x1024 resolution is displayed. I attached Xorg.0.log file.

Revision history for this message
In , Oleksiy Kokachev (lelikv) wrote :

Created an attachment (id=10093)
Log with modified panelsize option

Revision history for this message
In , agd5f (agd5f) wrote :

can you try adding the 1400x1050 mode to the mode list in the display section of config? e.g.,

Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"

Looks like the driver is trying to use 1280x1024.

Revision history for this message
In , Oleksiy Kokachev (lelikv) wrote :

(In reply to comment #8)
> can you try adding the 1400x1050 mode to the mode list in the display section
> of config? e.g.,
>
> Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
>
> Looks like the driver is trying to use 1280x1024.
>

That's exactly what I want - 1280x1024.

Revision history for this message
In , Oleksiy Kokachev (lelikv) wrote :

(In reply to comment #9)
> (In reply to comment #8)
> > can you try adding the 1400x1050 mode to the mode list in the display section
> > of config? e.g.,
> >
> > Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
> >
> > Looks like the driver is trying to use 1280x1024.
> >
>
 I mean that I want to set 1280x1024. But when I used PanelSize option, only left upper corner of screen is displayed and LCD is blinking.
> That's exactly what I want - 1280x1024.
>

Revision history for this message
In , agd5f (agd5f) wrote :

(In reply to comment #10)
> (In reply to comment #9)
> > (In reply to comment #8)
> > > can you try adding the 1400x1050 mode to the mode list in the display section
> > > of config? e.g.,
> > >
> > > Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
> > >
> > > Looks like the driver is trying to use 1280x1024.
> > >
> >
> I mean that I want to set 1280x1024. But when I used PanelSize option, only
> left upper corner of screen is displayed and LCD is blinking.

Are there any modes that do work on the panel? Are you sure it's 1400x1050? The bios specifies panel timings and size for 1024x768, so we don't have timing information for 1400x1050. Without that it's guess-work get get proper panel timing which is why your get the blinking and such.

Revision history for this message
In , Oleksiy Kokachev (lelikv) wrote :

(In reply to comment #11)
> (In reply to comment #10)
> > (In reply to comment #9)
> > > (In reply to comment #8)
> > > > can you try adding the 1400x1050 mode to the mode list in the display section
> > > > of config? e.g.,
> > > >
> > > > Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
> > > >
> > > > Looks like the driver is trying to use 1280x1024.
> > > >
> > >
> > I mean that I want to set 1280x1024. But when I used PanelSize option, only
> > left upper corner of screen is displayed and LCD is blinking.
>
> Are there any modes that do work on the panel? Are you sure it's 1400x1050?
> The bios specifies panel timings and size for 1024x768, so we don't have timing
> information for 1400x1050. Without that it's guess-work get get proper panel
> timing which is why your get the blinking and such.
>
 Only 1024x768 works correctly. I'm sure, that 1400x1050 is supported by that panel, because it's SVGA+ 15 inch lcd 1.5 years old. How can I calculate proper timing values for 1280x1024 resolution? I know about special calculators, but I don't have any information about that LCD. Any ideas?

Revision history for this message
In , Oleksiy Kokachev (lelikv) wrote :

(In reply to comment #12)
> (In reply to comment #11)
> > (In reply to comment #10)
> > > (In reply to comment #9)
> > > > (In reply to comment #8)
> > > > > can you try adding the 1400x1050 mode to the mode list in the display section
> > > > > of config? e.g.,
> > > > >
> > > > > Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
> > > > >
> > > > > Looks like the driver is trying to use 1280x1024.
> > > > >
> > > >
> > > I mean that I want to set 1280x1024. But when I used PanelSize option, only
> > > left upper corner of screen is displayed and LCD is blinking.
> >
> > Are there any modes that do work on the panel? Are you sure it's 1400x1050?
> > The bios specifies panel timings and size for 1024x768, so we don't have timing
> > information for 1400x1050. Without that it's guess-work get get proper panel
> > timing which is why your get the blinking and such.
> >
> Only 1024x768 works correctly. I'm sure, that 1400x1050 is supported by that
> panel, because it's SVGA+ 15 inch lcd 1.5 years old. How can I calculate proper
> timing values for 1280x1024 resolution? I know about special calculators, but I
> don't have any information about that LCD. Any ideas?
>

Alex, one more. Take a look at latest log. It seems,that bios provides timing information for 1280x1024 resolution. But these timing values don't work.

Revision history for this message
In , agd5f (agd5f) wrote :

(In reply to comment #12)
> (In reply to comment #11)
> > (In reply to comment #10)
> > > (In reply to comment #9)
> > > > (In reply to comment #8)
> > > > > can you try adding the 1400x1050 mode to the mode list in the display section
> > > > > of config? e.g.,
> > > > >
> > > > > Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
> > > > >
> > > > > Looks like the driver is trying to use 1280x1024.
> > > > >
> > > >
> > > I mean that I want to set 1280x1024. But when I used PanelSize option, only
> > > left upper corner of screen is displayed and LCD is blinking.
> >
> > Are there any modes that do work on the panel? Are you sure it's 1400x1050?
> > The bios specifies panel timings and size for 1024x768, so we don't have timing
> > information for 1400x1050. Without that it's guess-work get get proper panel
> > timing which is why your get the blinking and such.
> >
> Only 1024x768 works correctly. I'm sure, that 1400x1050 is supported by that
> panel, because it's SVGA+ 15 inch lcd 1.5 years old. How can I calculate proper
> timing values for 1280x1024 resolution? I know about special calculators, but I
> don't have any information about that LCD. Any ideas?
>

My guess would be that you actually have a 1024x768 panel. But if not, it's
actually a bit more complicated. Panels have fixed timings and need to be fed
those timings (1400x1050 for example). When you use a lower resolution, you
still feed the panel it's native timings, but you use a scaler to either scale
the lower res up to the native size or to generate a "centered" mode. You
could try generating a custom modeline, but at the moment the driver cannot use
custom modes as there is a chance they could damage the panel. You'd have to
edit the driver source to force a custom mode.

Revision history for this message
In , agd5f (agd5f) wrote :

(In reply to comment #13)
> (In reply to comment #12)
> > (In reply to comment #11)
> > > (In reply to comment #10)
> > > > (In reply to comment #9)
> > > > > (In reply to comment #8)
> > > > > > can you try adding the 1400x1050 mode to the mode list in the display section
> > > > > > of config? e.g.,
> > > > > >
> > > > > > Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
> > > > > >
> > > > > > Looks like the driver is trying to use 1280x1024.
> > > > > >
> > > > >
> > > > I mean that I want to set 1280x1024. But when I used PanelSize option, only
> > > > left upper corner of screen is displayed and LCD is blinking.
> > >
> > > Are there any modes that do work on the panel? Are you sure it's 1400x1050?
> > > The bios specifies panel timings and size for 1024x768, so we don't have timing
> > > information for 1400x1050. Without that it's guess-work get get proper panel
> > > timing which is why your get the blinking and such.
> > >
> > Only 1024x768 works correctly. I'm sure, that 1400x1050 is supported by that
> > panel, because it's SVGA+ 15 inch lcd 1.5 years old. How can I calculate proper
> > timing values for 1280x1024 resolution? I know about special calculators, but I
> > don't have any information about that LCD. Any ideas?
> >
>
> Alex, one more. Take a look at latest log. It seems,that bios provides timing
> information for 1280x1024 resolution. But these timing values don't work.
>

Where do you see that? The bios have timing info for 1024x768 only:

(II) RADEON(0): Panel ID string: 1024x768
(II) RADEON(0): Panel Size from BIOS: 1024x768
(II) RADEON(0): BIOS provided dividers will be used.

in your newer log, you force the panel size:
(**) RADEON(0): Panel size is forced to: 1400x1050

which attempts to do the right thing based on the current state of the hardware, but there is no other timing info in the bios.

Revision history for this message
In , Oleksiy Kokachev (lelikv) wrote :
Download full text (3.1 KiB)

(In reply to comment #15)
> (In reply to comment #13)
> > (In reply to comment #12)
> > > (In reply to comment #11)
> > > > (In reply to comment #10)
> > > > > (In reply to comment #9)
> > > > > > (In reply to comment #8)
> > > > > > > can you try adding the 1400x1050 mode to the mode list in the display section
> > > > > > > of config? e.g.,
> > > > > > >
> > > > > > > Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
> > > > > > >
> > > > > > > Looks like the driver is trying to use 1280x1024.
> > > > > > >
> > > > > >
> > > > > I mean that I want to set 1280x1024. But when I used PanelSize option, only
> > > > > left upper corner of screen is displayed and LCD is blinking.
> > > >
> > > > Are there any modes that do work on the panel? Are you sure it's 1400x1050?
> > > > The bios specifies panel timings and size for 1024x768, so we don't have timing
> > > > information for 1400x1050. Without that it's guess-work get get proper panel
> > > > timing which is why your get the blinking and such.
> > > >
> > > Only 1024x768 works correctly. I'm sure, that 1400x1050 is supported by that
> > > panel, because it's SVGA+ 15 inch lcd 1.5 years old. How can I calculate proper
> > > timing values for 1280x1024 resolution? I know about special calculators, but I
> > > don't have any information about that LCD. Any ideas?
> > >
> >
> > Alex, one more. Take a look at latest log. It seems,that bios provides timing
> > information for 1280x1024 resolution. But these timing values don't work.
> >
>
> Where do you see that? The bios have timing info for 1024x768 only:
>
> (II) RADEON(0): Panel ID string: 1024x768
> (II) RADEON(0): Panel Size from BIOS: 1024x768
> (II) RADEON(0): BIOS provided dividers will be used.
>
> in your newer log, you force the panel size:
> (**) RADEON(0): Panel size is forced to: 1400x1050
>
> which attempts to do the right thing based on the current state of the
> hardware, but there is no other timing info in the bios.
>

I'll try to give additional information.
1. Panel is not 1024x768, because I used windows on it with 1280x1024 resolution. I Don't know why ddcprobe reports correct info about supported resolution, but DDC module ati driver cannot correctly get that information.
2. If force panel size to 1400x1050, then all modes work incorrectly, even 1024x768. Sorry, I misinformed You in previous post.
3.About timings. I found the following line in latest log, and I'm not sure, who exactly provides these values for 1280x1024 mode. It seems, that on-chip RMX provides them, but I don't know anything about RMX:
(**) RADEON(0): Panel size is forced to: 1400x1050
(II) RADEON(0): Total number of valid DDC mode(s) found: 0
(II) RADEON(0): Valid mode using on-chip RMX: 1280x1024
(II) RADEON(0): Valid mode using on-chip RMX: 1024x768
(II) RADEON(0): Valid mode using on-chip RMX: 800x600
(II) RADEON(0): Valid mode using on-chip RMX: 640x480
(II) RADEON(0): Total number of valid FP mode(s) found: 4
(--) RADEON(0): Virtual size is 1280x1024 (pitch 1280)
(**) RADEON(0): *Mode "1280x1024": 122.0 MHz (scaled from 0.0 MHz), 64.9 kHz, 60.0 Hz
(II) RADEON(0): Modeline "1280x1024" 122.00 1280 1488 1640 1880 10...

Read more...

Revision history for this message
In , Oleksiy Kokachev (lelikv) wrote :

Also I've tried to change panel size to 1280x1024.. LCD is not blinking, but screen position is still incorrect. I've attached log file.

Revision history for this message
In , Oleksiy Kokachev (lelikv) wrote :

Created an attachment (id=10095)
log file with panelsize 1280x1024

Revision history for this message
In , agd5f (agd5f) wrote :
Download full text (3.5 KiB)

(In reply to comment #16)
> (In reply to comment #15)
> > (In reply to comment #13)
> > > (In reply to comment #12)
> > > > (In reply to comment #11)
> > > > > (In reply to comment #10)
> > > > > > (In reply to comment #9)
> > > > > > > (In reply to comment #8)
> > > > > > > > can you try adding the 1400x1050 mode to the mode list in the display section
> > > > > > > > of config? e.g.,
> > > > > > > >
> > > > > > > > Modes "1400x1050" "1280x1024" "1024x768" "800x600" "640x480"
> > > > > > > >
> > > > > > > > Looks like the driver is trying to use 1280x1024.
> > > > > > > >
> > > > > > >
> > > > > > I mean that I want to set 1280x1024. But when I used PanelSize option, only
> > > > > > left upper corner of screen is displayed and LCD is blinking.
> > > > >
> > > > > Are there any modes that do work on the panel? Are you sure it's 1400x1050?
> > > > > The bios specifies panel timings and size for 1024x768, so we don't have timing
> > > > > information for 1400x1050. Without that it's guess-work get get proper panel
> > > > > timing which is why your get the blinking and such.
> > > > >
> > > > Only 1024x768 works correctly. I'm sure, that 1400x1050 is supported by that
> > > > panel, because it's SVGA+ 15 inch lcd 1.5 years old. How can I calculate proper
> > > > timing values for 1280x1024 resolution? I know about special calculators, but I
> > > > don't have any information about that LCD. Any ideas?
> > > >
> > >
> > > Alex, one more. Take a look at latest log. It seems,that bios provides timing
> > > information for 1280x1024 resolution. But these timing values don't work.
> > >
> >
> > Where do you see that? The bios have timing info for 1024x768 only:
> >
> > (II) RADEON(0): Panel ID string: 1024x768
> > (II) RADEON(0): Panel Size from BIOS: 1024x768
> > (II) RADEON(0): BIOS provided dividers will be used.
> >
> > in your newer log, you force the panel size:
> > (**) RADEON(0): Panel size is forced to: 1400x1050
> >
> > which attempts to do the right thing based on the current state of the
> > hardware, but there is no other timing info in the bios.
> >
>
> I'll try to give additional information.
> 1. Panel is not 1024x768, because I used windows on it with 1280x1024
> resolution. I Don't know why ddcprobe reports correct info about supported
> resolution, but DDC module ati driver cannot correctly get that information.

in this case, ddcprobe just lists the modes the bios is capable of programming via VBE. It doesn't have anything to do with the panel size (you note there are also 1600x1200 modes).

> 2. If force panel size to 1400x1050, then all modes work incorrectly, even
> 1024x768. Sorry, I misinformed You in previous post.

Right, because as I said the panel is always fed with the native timings. All smaller resolutions are handled by the scaler. Those timings that are derived when you force the panel size are obviously wrong and the panel does not like them.

> 3.About timings. I found the following line in latest log, and I'm not sure,
> who exactly provides these values for 1280x1024 mode. It seems, that on-chip
> RMX provides them, but I don't know anything about RMX:

RMX is the built in panel scale...

Read more...

Bug Watch Updater (bug-watch-updater)
Changed in xorg-server:
status: Unknown → Confirmed
Revision history for this message
In , Oleksiy Kokachev (lelikv) wrote :

Thanks.. For everyone..

Revision history for this message
Bryce Harrington (bryce) wrote :

Freyr, are you also seeing these lines in your Xorg.0.log?

(WW) RADEON(0): Mode 1280x1024 is out of range.
(WW) RADEON(0): Valid modes must be between 320x200-1024x768

Could one of you see if adding Option "DDCMode" "true" has any affect on this?
Also try Option "IgnoreEDID" "true".

Or also try commenting out the Load "vbe" line in the modules section. (I doubt this will do anything, but might be worth a try).

Changed in xorg:
status: Confirmed → Needs Info
Revision history for this message
Bryce Harrington (bryce) wrote :

Here's what was reported upstream:

Looks to me that the BIOS is claiming that it's a 1024x768 LVDS panel.. (that
is, it explicit gives that resolution, not the lack of a resolution). So first,
blame your laptop vendors for f*king up the BIOS infos (it probably comes with
a hacked windows driver to work around the problem), then, do we still have the
panel size overrides in xorg.conf ?

Try enabling the PanelSize option, e.g.,

Option "PanelSize" "1400x1050"

Bug Watch Updater (bug-watch-updater)
Changed in xorg-server:
status: Confirmed → Fix Released
Revision history for this message
Launchpad Janitor (janitor) wrote :

[Expired for xorg (Ubuntu) because there has been no activity for 60 days.]

Bug Watch Updater (bug-watch-updater)
Changed in xorg-server:
importance: Unknown → Medium
Bug Watch Updater (bug-watch-updater)
Changed in xorg-server:
importance: Medium → Unknown
Bug Watch Updater (bug-watch-updater)
Changed in xorg-server:
importance: Unknown → Medium
To post a comment you must log in.
This report contains Public information  
Everyone can see this information.
Subscribing...

Other bug subscribers

Remote bug watches

Bug watches keep track of this bug in other bug trackers.