@Ben Andersen
I have this monitor as well on Ubuntu 9.04 and after installing xserver-xorg-input-evtouch I did the following manual steps:
1. Ran the calibration, but removed everything but these lines from /etc/evtouch/config (of course your values will most likely be different)
MINX="246" MINY="181" MAXX="3827" MAXY="3952"
2. Created /etc/hal/fdi/policy/touchscreen.fdi containing:
<?xml version="1.0" encoding="UTF-8"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2"> <device> <match key="info.product" contains="ITM Inc USB Touch Panel"> <match key="info.capabilities" contains="input.touchpad"> <merge key="input.x11_options.SwapX" type="string">1</merge> <merge key="input.x11_options.SwapY" type="string">1</merge> </match> </match> </device> </deviceinfo>
3. Rebooted. Worked.
The lshal info for evtouch looks like this for me now:
udi = '/org/freedesktop/Hal/devices/usb_device_403_f9e9_noserial_if0_logicaldev_input' button.has_state = false (bool) info.addons.singleton = {'hald-addon-input'} (string list) info.capabilities = {'input', 'button', 'input.touchpad'} (string list) info.category = 'input' (string) info.parent = '/org/freedesktop/Hal/devices/usb_device_403_f9e9_noserial_if0' (string) info.product = 'ITM Inc USB Touch Panel' (string) info.subsystem = 'input' (string) info.udi = '/org/freedesktop/Hal/devices/usb_device_403_f9e9_noserial_if0_logicaldev_input' (string) input.device = '/dev/input/event6' (string) input.originating_device = '/org/freedesktop/Hal/devices/usb_device_403_f9e9_noserial_if0' (string) input.product = 'ITM Inc USB Touch Panel' (string) input.x11_driver = 'evtouch' (string) input.x11_options.Rotate = 'CW' (string) input.x11_options.SwapX = '1' (string) input.x11_options.SwapY = '1' (string) input.x11_options.Swapx = '1' (string) input.x11_options.emulate3buttons = 'true' (string) input.x11_options.emulate3timeout = '50' (string) input.x11_options.maxx = '3827' (string) input.x11_options.maxy = '3952' (string) input.x11_options.minx = '246' (string) input.x11_options.miny = '181' (string) input.x11_options.reportingmode = 'raw' (string) input.x11_options.sendcoreevents = 'on' (string) linux.device_file = '/dev/input/event6' (string) linux.hotplug_type = 2 (0x2) (int) linux.subsystem = 'input' (string) linux.sysfs_path = '/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-2/2-2:1.0/input/input6/event6' (string)
Good luck!
@Ben Andersen
I have this monitor as well on Ubuntu 9.04 and after installing xserver- xorg-input- evtouch I did the following manual steps:
1. Ran the calibration, but removed everything but these lines from /etc/evtouch/config (of course your values will most likely be different)
MINX="246"
MINY="181"
MAXX="3827"
MAXY="3952"
2. Created /etc/hal/ fdi/policy/ touchscreen. fdi containing:
<?xml version="1.0" encoding="UTF-8"?> <!-- -*- SGML -*- -->
<deviceinfo version="0.2"> capabilities" contains= "input. touchpad" > x11_options. SwapX" type="string" >1</merge> x11_options. SwapY" type="string" >1</merge>
<device>
<match key="info.product" contains="ITM Inc USB Touch Panel">
<match key="info.
<merge key="input.
<merge key="input.
</match>
</match>
</device>
</deviceinfo>
3. Rebooted. Worked.
The lshal info for evtouch looks like this for me now:
udi = '/org/freedeskt op/Hal/ devices/ usb_device_ 403_f9e9_ noserial_ if0_logicaldev_ input' addons. singleton = {'hald- addon-input' } (string list) op/Hal/ devices/ usb_device_ 403_f9e9_ noserial_ if0' (string) op/Hal/ devices/ usb_device_ 403_f9e9_ noserial_ if0_logicaldev_ input' (string) originating_ device = '/org/freedeskt op/Hal/ devices/ usb_device_ 403_f9e9_ noserial_ if0' (string) x11_options. Rotate = 'CW' (string) x11_options. SwapX = '1' (string) x11_options. SwapY = '1' (string) x11_options. Swapx = '1' (string) x11_options. emulate3buttons = 'true' (string) x11_options. emulate3timeout = '50' (string) x11_options. maxx = '3827' (string) x11_options. maxy = '3952' (string) x11_options. minx = '246' (string) x11_options. miny = '181' (string) x11_options. reportingmode = 'raw' (string) x11_options. sendcoreevents = 'on' (string) hotplug_ type = 2 (0x2) (int) pci0000: 00/0000: 00:1d.0/ usb2/2- 2/2-2:1. 0/input/ input6/ event6' (string)
button.has_state = false (bool)
info.
info.capabilities = {'input', 'button', 'input.touchpad'} (string list)
info.category = 'input' (string)
info.parent = '/org/freedeskt
info.product = 'ITM Inc USB Touch Panel' (string)
info.subsystem = 'input' (string)
info.udi = '/org/freedeskt
input.device = '/dev/input/event6' (string)
input.
input.product = 'ITM Inc USB Touch Panel' (string)
input.x11_driver = 'evtouch' (string)
input.
input.
input.
input.
input.
input.
input.
input.
input.
input.
input.
input.
linux.device_file = '/dev/input/event6' (string)
linux.
linux.subsystem = 'input' (string)
linux.sysfs_path = '/sys/devices/
Good luck!