Comment 0 for bug 215689

Hi everyone,

My wacom table graphire worked OK in Gutsy Gibbons, I made a clean install of Hardy Heron, and now only the pen is working (but not the eraser and the pressure) i.e. the mouse is not working! I reinstalled wacom-tools and the xorg-wacom-.... packages several times and the xorg.conf wasn't touched!

Here is my xorg.conf

# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg

Section "InputDevice"
 Identifier "Generic Keyboard"
 Driver "kbd"
 Option "XkbRules" "xorg"
 Option "XkbModel" "pc105"
 Option "XkbLayout" "latam"
EndSection

Section "InputDevice"
 Identifier "Configured Mouse"
 Driver "vmmouse"
 Option "CorePointer"
EndSection

Section "InputDevice"
 Identifier "Synaptics Touchpad"
 Driver "synaptics"
 Option "SendCoreEvents" "true"
 Option "Device" "/dev/psaux"
 Option "Protocol" "auto-dev"
 Option "HorizEdgeScroll" "0"
EndSection

Section "Device"
 Identifier "Configured Video Device"
EndSection

Section "Monitor"
 Identifier "Configured Monitor"
EndSection

Section "Screen"
 Identifier "Default Screen"
 Monitor "Configured Monitor"
 Device "Configured Video Device"
EndSection

Section "ServerLayout"
 Identifier "Default Layout"
 Screen "Default Screen"
 InputDevice "Synaptics Touchpad"
EndSection[/CODE]

When i tried to make the same steps of adding
[CODE]
   InputDevice “cursor” “SendCoreEvents”
    InputDevice “stylus” “SendCoreEvents”
    InputDevice “eraser” “SendCoreEvents”

to the xorg.conf file section [CODE]ServelLayout[/CODE] and the other stuff around:

Section "InputDevice"
    Identifier "cursor"
    Driver "wacom"
    Option "Device" "/dev/input/wacom"
    Option "Type" "cursor"
    Option "Mode" "relative"
    Option "USB" "on"
EndSection
Section "InputDevice"
    Identifier "stylus"
    Driver "wacom"
    Option "Device" "/dev/input/wacom"
    Option "Type" "stylus"
    Option "Mode" "absolute"
    Option "USB" "on"
    Option "PressCurve" "50,0,100,50"
EndSection
Section "InputDevice"
    Identifier "eraser"
    Driver "wacom"
    Option "Device" "/dev/input/wacom"
    Option "Type" "eraser"
    Option "Mode" "absolute"
    Option "USB" "on"
EndSection

My Xorg collapsed! It only could work in a low, low resolution mode and the system freezes in the logout... So what can i do now? Do I should report this as a bug?

the output of ls -la /dev/input

 ls -la /dev/input/
total 0
drwxr-xr-x 4 root root 420 2008-04-11 07:45 .
drwxr-xr-x 12 root root 13960 2008-04-11 07:45 ..
drwxr-xr-x 2 root root 80 2008-04-11 07:45 by-id
drwxr-xr-x 2 root root 160 2008-04-11 07:45 by-path
crw-rw---- 1 root root 13, 64 2008-04-11 07:45 event0
crw-rw---- 1 root root 13, 65 2008-04-11 07:45 event1
crw-rw---- 1 root root 13, 74 2008-04-11 07:45 event10
crw-rw---- 1 root root 13, 66 2008-04-11 07:45 event2
crw-rw---- 1 root root 13, 67 2008-04-11 07:45 event3
crw-rw---- 1 root root 13, 68 2008-04-11 07:45 event4
crw-rw---- 1 root root 13, 69 2008-04-11 07:45 event5
crw-rw---- 1 root root 13, 70 2008-04-11 07:45 event6
crw-rw---- 1 root root 13, 71 2008-04-11 07:45 event7
crw-rw---- 1 root root 13, 72 2008-04-11 07:45 event8
crw-rw---- 1 root root 13, 73 2008-04-11 07:45 event9
crw-rw---- 1 root root 13, 63 2008-04-11 07:45 mice
crw-rw---- 1 root root 13, 32 2008-04-11 07:45 mouse0
crw-rw---- 1 root root 13, 33 2008-04-11 07:45 mouse1
crw-rw---- 1 root root 13, 34 2008-04-11 07:45 mouse2
lrwxrwxrwx 1 root root 6 2008-04-11 07:45 tablet-graphire4-6x8 -> event8
lrwxrwxrwx 1 root root 6 2008-04-11 07:45 wacom -> event8

the output of lsusb

 lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 002: ID 413c:8126 Dell Computer Corp.
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 004: ID 056a:0016 Wacom Co., Ltd
Bus 001 Device 001: ID 0000:0000

the output of wacdump /dev/input/wacom
08:29:29.611 ERROR: Failed to open /dev/input/wacom: Permission denied
WacomOpenTablet: Permission denied

Thanks in advance