Any update on this ? I really dont want to manually compile and risk it getting broken.
After numerous tries, I was able to get this to work by the following
1) plug the EVDO and wait for the log to show failed as given on my opening thread
2) type "sudo modprobe option"
3) unplug and plug EVDO back in... it will show
=======================================================================
nufacturer: Qualcomm, Incorporated
Product: USB MMC Storage
Serial No.: 000000000002
-------------------------
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0
Using endpoint 0x08 for message sending ...
Trying to send message 1 to endpoint 0x08 ...
OK, message successfully sent
Resetting response endpoint 0x87
Resetting message endpoint 0x08
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
searching devices, found USB ID 1d6b:0003
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 046d:c52b
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0cf3:3005
searching devices, found USB ID 0bda:0139
searching devices, found USB ID 058f:a014
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
Searching for target devices ...
searching devices, found USB ID 1d6b:0003
searching devices, found USB ID 1c9e:9e00
found matching vendor ID
found matching product ID
target class ff matching
adding device
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 046d:c52b
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0cf3:3005
searching devices, found USB ID 0bda:0139
searching devices, found USB ID 058f:a014
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
Found target device, now opening
Found target device 004 on bus 003
Target device description data
-------------------------
Manufacturer: Qualcomm, Incorporated
Product: Qualcomm CDMA Technologies MSM
Serial No.: not provided
-------------------------
Found correct target device
Mode switch succeeded. Bye.
ok:1c9e:9e00
--------------------------------
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ... Reading attributes ...
USB dir exists: /sys/bus/usb/devices/3-1
Warning: USB attribute "serial" not readable.
All attributes matched
Mode switching was successful, found 1c9e:9e00 (Qualcomm, Incorporated: Qualcomm CDMA Technologies MSM)Now checking for bound driver ...
no driver has bound to interface 0 yet
Device not in "bind_list" yet, bind it now
modprobe not foundModule loader is (null)
Module is active already
Trying to add ID to driver "option"
ID added to driver; check for new devices in /dev
driver binding failed
Checking for AVOID_RESET_QUIRK kernel attribute
AVOID_RESET_QUIRK activated
All done, exiting
=======================================================================
Any update on this ? I really dont want to manually compile and risk it getting broken.
After numerous tries, I was able to get this to work by the following
1) plug the EVDO and wait for the log to show failed as given on my opening thread
2) type "sudo modprobe option"
3) unplug and plug EVDO back in... it will show
======= ======= ======= ======= ======= ======= ======= ======= ======= ======= = ------- ------- ----
nufacturer: Qualcomm, Incorporated
Product: USB MMC Storage
Serial No.: 000000000002
-------
Looking for active driver ...
OK, driver found ("usb-storage")
OK, driver "usb-storage" detached
Setting up communication with interface 0
Using endpoint 0x08 for message sending ...
Trying to send message 1 to endpoint 0x08 ...
OK, message successfully sent
Resetting response endpoint 0x87
Resetting message endpoint 0x08
Device is gone, skipping any further commands
Checking for mode switch (max. 20 times, once per second) ...
Searching for target devices ...
searching devices, found USB ID 1d6b:0003
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 046d:c52b
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0cf3:3005
searching devices, found USB ID 0bda:0139
searching devices, found USB ID 058f:a014
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
Searching for target devices ...
searching devices, found USB ID 1d6b:0003
searching devices, found USB ID 1c9e:9e00
found matching vendor ID
found matching product ID
target class ff matching
adding device
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 046d:c52b
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
searching devices, found USB ID 0cf3:3005
searching devices, found USB ID 0bda:0139
searching devices, found USB ID 058f:a014
searching devices, found USB ID 8087:0024
searching devices, found USB ID 1d6b:0002
Found target device, now opening
Found target device 004 on bus 003
Target device description data ------- ------- ---- ------- ------- ----
-------
Manufacturer: Qualcomm, Incorporated
Product: Qualcomm CDMA Technologies MSM
Serial No.: not provided
-------
Found correct target device
Mode switch succeeded. Bye.
ok:1c9e:9e00 ------- ------- ------- ---- usb/devices/ 3-1
-------
(end of usb_modeswitch output)
Checking success of mode switch for max. 20 seconds ... Reading attributes ...
USB dir exists: /sys/bus/
Warning: USB attribute "serial" not readable.
All attributes matched
Mode switching was successful, found 1c9e:9e00 (Qualcomm, Incorporated: Qualcomm CDMA Technologies MSM)Now checking for bound driver ...
no driver has bound to interface 0 yet
Device not in "bind_list" yet, bind it now
modprobe not foundModule loader is (null)
Module is active already
Trying to add ID to driver "option"
ID added to driver; check for new devices in /dev
driver binding failed
Checking for AVOID_RESET_QUIRK kernel attribute
AVOID_RESET_QUIRK activated
All done, exiting ======= ======= ======= ======= ======= ======= ======= ======= ======= =
=======
Now the EVDO de