Seems that the adapter is not detected
# lshw -C network *-network description: Ethernet interface produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller fabriquant: Realtek Semiconductor Co., Ltd. identifiant matériel: 0 information bus: pci@0000:02:00.0 nom logique: enp2s0 version: 0c numéro de série: f8:bc:12:60:7d:12 taille: 1Gbit/s capacité: 1Gbit/s bits: 64 bits horloge: 33MHz fonctionnalités: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl8168g-2_0.0.1 02/06/13 ip=192.168.80.59 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s ressources: irq:28 portE/S:e000(taille=256) mémoire:f7c00000-f7c00fff mémoire:f0000000-f0003fff # lsmod | grep 88 8812au 1294336 0 cfg80211 610304 1 8812au aesni_intel 188416 0
[ 179.290360] 8812au: loading out-of-tree module taints kernel. [ 179.290901] 8812au: module verification failed: signature and/or required key missing - tainting kernel [ 179.292440] RTL871X: module init start [ 179.292442] RTL871X: rtl8812au v4.3.8_12175.20140902 [ 179.292442] RTL871X: build time: Feb 12 2018 20:26:42 [ 179.292466] usbcore: registered new interface driver rtl8812au [ 179.292466] RTL871X: module init ret=0 [ 189.899190] usb 3-9: new high-speed USB device number 4 using xhci_hcd [ 190.039610] usb 3-9: New USB device found, idVendor=0bda, idProduct=a811 [ 190.039613] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 190.039616] usb 3-9: Product: 802.11ac WLAN Adapter [ 190.039618] usb 3-9: Manufacturer: Realtek [ 190.039619] usb 3-9: SerialNumber: 00e04c000001
Bus 003 Device 004: ID 0bda:a811 Realtek Semiconductor Corp. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0bda Realtek Semiconductor Corp. idProduct 0xa811 bcdDevice 2.00 iManufacturer 1 Realtek iProduct 2 802.11ac WLAN Adapter iSerial 3 00e04c000001 bNumConfigurations 1
ProblemType: Bug DistroRelease: Ubuntu 18.04 Package: rtl8812au-dkms 4.3.8.12175.20140902+dfsg-0ubuntu7 ProcVersionSignature: Ubuntu 4.13.0-32.35-generic 4.13.13 Uname: Linux 4.13.0-32-generic x86_64 ApportVersion: 2.20.8-0ubuntu8 Architecture: amd64 Date: Mon Feb 12 20:28:34 2018 InstallationDate: Installed on 2018-02-10 (1 days ago) InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180210) PackageArchitecture: all ProcEnviron: TERM=xterm-256color PATH=(custom, no user) XDG_RUNTIME_DIR=<set> LANG=fr_FR.UTF-8 SHELL=/bin/bash SourcePackage: rtl8812au UpgradeStatus: No upgrade log present (probably fresh install)
Seems that the adapter is not detected
# lshw -C network
fonctionnalités : pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion= 2.3LK-NAPI duplex=full firmware= rtl8168g- 2_0.0.1 02/06/13 ip=192.168.80.59 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s e000(taille= 256) mémoire: f7c00000- f7c00fff mémoire: f0000000- f0003fff
*-network
description: Ethernet interface
produit: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
fabriquant: Realtek Semiconductor Co., Ltd.
identifiant matériel: 0
information bus: pci@0000:02:00.0
nom logique: enp2s0
version: 0c
numéro de série: f8:bc:12:60:7d:12
taille: 1Gbit/s
capacité: 1Gbit/s
bits: 64 bits
horloge: 33MHz
ressources: irq:28 portE/S:
# lsmod | grep 88
8812au 1294336 0
cfg80211 610304 1 8812au
aesni_intel 188416 0
[ 179.290360] 8812au: loading out-of-tree module taints kernel. 12175.20140902
[ 179.290901] 8812au: module verification failed: signature and/or required key missing - tainting kernel
[ 179.292440] RTL871X: module init start
[ 179.292442] RTL871X: rtl8812au v4.3.8_
[ 179.292442] RTL871X: build time: Feb 12 2018 20:26:42
[ 179.292466] usbcore: registered new interface driver rtl8812au
[ 179.292466] RTL871X: module init ret=0
[ 189.899190] usb 3-9: new high-speed USB device number 4 using xhci_hcd
[ 190.039610] usb 3-9: New USB device found, idVendor=0bda, idProduct=a811
[ 190.039613] usb 3-9: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 190.039616] usb 3-9: Product: 802.11ac WLAN Adapter
[ 190.039618] usb 3-9: Manufacturer: Realtek
[ 190.039619] usb 3-9: SerialNumber: 00e04c000001
Bus 003 Device 004: ID 0bda:a811 Realtek Semiconductor Corp. tions 1
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0bda Realtek Semiconductor Corp.
idProduct 0xa811
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11ac WLAN Adapter
iSerial 3 00e04c000001
bNumConfigura
ProblemType: Bug 20140902+ dfsg-0ubuntu7 ature: Ubuntu 4.13.0- 32.35-generic 4.13.13 ture: all 256color DIR=<set>
DistroRelease: Ubuntu 18.04
Package: rtl8812au-dkms 4.3.8.12175.
ProcVersionSign
Uname: Linux 4.13.0-32-generic x86_64
ApportVersion: 2.20.8-0ubuntu8
Architecture: amd64
Date: Mon Feb 12 20:28:34 2018
InstallationDate: Installed on 2018-02-10 (1 days ago)
InstallationMedia: Ubuntu 18.04 LTS "Bionic Beaver" - Alpha amd64 (20180210)
PackageArchitec
ProcEnviron:
TERM=xterm-
PATH=(custom, no user)
XDG_RUNTIME_
LANG=fr_FR.UTF-8
SHELL=/bin/bash
SourcePackage: rtl8812au
UpgradeStatus: No upgrade log present (probably fresh install)