Comment 5 for bug 152794
Revision history for this message
| Gary Mansell (garymansell) wrote Re: [Bug 152794] Re: nis daemon fails to attach to domain the first time it is run in Gutsy | #5 |
© 2004
Canonical Ltd.
•
Terms of use
•
Data privacy
•
Contact Launchpad Support
•
Blog
•
Careers
•
System status
•
35a32c5
(Get the code!)
will have to look at this when I am back at work next week....
----- Original Message ----
From: James R. Phillips <email address hidden>
To: <email address hidden>
Sent: Saturday, 20 October, 2007 12:03:21 AM
Subject: [Bug 152794] Re: nis daemon fails to attach to domain the first time it is run in Gutsy
OK. BTW, it is /usr/bin/nm-tool, not /usr/sbin/nm-tool.
Output of first run (during boot)
==================
NetworkManager Tool
State: connected
- Device: eth0
------
NM Path: /org/freedeskto
Type: Wired
Driver: e100
Active: yes
HW Address: 00:02:55:1A:5D:7C
Capabilities:
Supported: yes
Carrier Detect: yes
Speed: 100 Mb/s
Wired Settings
Hardware Link: yes
IP Settings:
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Broadcast: 0.0.0.0
Gateway: 0.0.0.0
Primary DNS: 0.0.0.0
Secondary DNS: 0.0.0.0
==================
Output of second run (after boot)
==================
NetworkManager Tool
State: connected
- Device: eth0
------
NM Path: /org/freedeskto
Type: Wired
Driver: e100
Active: yes
HW Address: 00:02:55:1A:5D:7C
Capabilities:
Supported: yes
Carrier Detect: yes
Speed: 100 Mb/s
Wired Settings
Hardware Link: yes
IP Settings:
IP Address: 192.168.1.11
Subnet Mask: 255.255.255.0
Broadcast: 192.168.1.255
Gateway: 192.168.1.1
Primary DNS: 192.168.1.1
Secondary DNS: 0.0.0.0
==================
eth0 does not appear to have an assigned IP address the first time
/etc/init.d/nis is run.
--
nis daemon fails to attach to domain the first time it is run in Gutsy
https:/
You received this bug notification because you are a direct subscriber
of the bug.
_
Want ideas for reducing your carbon footprint? Visit Yahoo! For Good http://