Comment 4 for bug 152794

OK. BTW, it is /usr/bin/nm-tool, not /usr/sbin/nm-tool.

Output of first run (during boot)
==================
NetworkManager Tool

State: connected

- Device: eth0 ----------------------------------------------------------------
  NM Path: /org/freedesktop/NetworkManager/Devices/eth0
  Type: Wired
  Driver: e100
  Active: yes
  HW Address: 00:02:55:1A:5D:7C

  Capabilities:
    Supported: yes
    Carrier Detect: yes
    Speed: 100 Mb/s

  Wired Settings
    Hardware Link: yes

  IP Settings:
    IP Address: 0.0.0.0
    Subnet Mask: 0.0.0.0
    Broadcast: 0.0.0.0
    Gateway: 0.0.0.0
    Primary DNS: 0.0.0.0
    Secondary DNS: 0.0.0.0
==================

Output of second run (after boot)
==================
NetworkManager Tool

State: connected

- Device: eth0 ----------------------------------------------------------------
  NM Path: /org/freedesktop/NetworkManager/Devices/eth0
  Type: Wired
  Driver: e100
  Active: yes
  HW Address: 00:02:55:1A:5D:7C

  Capabilities:
    Supported: yes
    Carrier Detect: yes
    Speed: 100 Mb/s

  Wired Settings
    Hardware Link: yes

  IP Settings:
    IP Address: 192.168.1.11
    Subnet Mask: 255.255.255.0
    Broadcast: 192.168.1.255
    Gateway: 192.168.1.1
    Primary DNS: 192.168.1.1
    Secondary DNS: 0.0.0.0
==================
eth0 does not appear to have an assigned IP address the first time /etc/init.d/nis is run.