package network-manager-gnome 0.6.5-0ubuntu9 failed to install/upgrade: dependency problems - leaving unconfigured
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
network-manager-applet (Ubuntu) |
Expired
|
Undecided
|
Unassigned |
Bug Description
Upon upgrading network-manager via synaptic or the GNOME update manager, the keyboard (PS/2) stops responding and no more applications will open. Mouse (USB) is still functioning. Ubuntu is version 7.10 Tribe 3 after a couple of successful updates (via cabled ethernet). Wireless network device uses zd1211rw module. Uname and dmesg follows:
acp@cobra$ uname -a
Linux cobra 2.6.22-9-generic #1 SMP Fri Aug 3 00:20:35 GMT 2007 x86_64 GNU/Linux
acp@cobra$ dmesg
[ 0.000000] Linux version 2.6.22-9-generic (buildd@yellow) (gcc version 4.1.3 20070718 (prerelease) (Ubuntu 4.1.2-14ubuntu1)) #1 SMP Fri Aug 3 00:20:35 GMT 2007 (Ubuntu 2.6.22-
[ 0.000000] Command line: root=UUID=
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001df30000 (usable)
[ 0.000000] BIOS-e820: 000000001df30000 - 000000001df40000 (ACPI data)
[ 0.000000] BIOS-e820: 000000001df40000 - 000000001dff0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000001dff0000 - 000000001e000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 122672) 1 entries of 3200 used
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP 000FB140, 0021 (r2 ACPIAM)
[ 0.000000] ACPI: XSDT 1DF30100, 003C (r1 A M I OEMXSDT 9000512 MSFT 97)
[ 0.000000] ACPI: FACP 1DF30290, 00F4 (r3 A M I OEMFACP 9000512 MSFT 97)
[ 0.000000] ACPI: DSDT 1DF303F0, 3D5E (r1 A0253 A0253505 505 INTL 2002026)
[ 0.000000] ACPI: FACS 1DF40000, 0040
[ 0.000000] ACPI: APIC 1DF30390, 0054 (r1 A M I OEMAPIC 9000512 MSFT 97)
[ 0.000000] ACPI: OEMB 1DF40040, 0040 (r1 A M I AMI_OEM 9000512 MSFT 97)
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 000000000000000
[ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used
[ 0.000000] Entering add_active_range(0, 256, 122672) 1 entries of 3200 used
[ 0.000000] Bootmem setup node 0 000000000000000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 122672
[ 0.000000] On node 0 totalpages: 122575
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 1124 pages reserved
[ 0.000000] DMA zone: 2819 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 1621 pages used for memmap
[ 0.000000] DMA32 zone: 116955 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages used for memmap
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e1780000)
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 119774
[ 0.000000] Kernel command line: root=UUID=
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 16384 bytes)
[ 13.025870] time.c: Detected 1596.026 MHz processor.
[ 13.026788] Console: colour VGA+ 80x25
[ 13.026806] Checking aperture...
[ 13.026810] CPU 0: aperture @ f4000000 size 64 MB
[ 13.033765] Memory: 471772k/490688k available (2271k kernel code, 18528k reserved, 1180k data, 300k init)
[ 13.033822] SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 13.111794] Calibrating delay using timer specific routine.. 3193.71 BogoMIPS (lpj=6387424)
[ 13.111832] Security Framework v1.0.0 initialized
[ 13.111840] SELinux: Disabled at boot.
[ 13.111906] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 13.112364] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 13.112600] Mount-cache hash table entries: 256
[ 13.112756] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 13.112760] CPU: L2 Cache: 256K (64 bytes/line)
[ 13.112763] CPU 0/0 -> Node 0
[ 13.112782] SMP alternatives: switching to UP code
[ 13.112967] Freeing SMP alternatives: 23k freed
[ 13.113227] Early unpacking initramfs... done
[ 13.478753] ACPI: Core revision 20070126
[ 13.478816] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 13.521134] Using local APIC timer interrupts.
[ 13.583735] result 12468948
[ 13.583738] Detected 12.468 MHz APIC timer.
[ 13.587416] Brought up 1 CPUs
[ 13.587635] NET: Registered protocol family 16
[ 13.587731] ACPI: bus type pci registered
[ 13.587739] PCI: Using configuration type 1
[ 13.590910] ACPI: EC: Look up EC in DSDT
[ 13.595106] ACPI: Interpreter enabled
[ 13.595110] ACPI: (supports S0 S1 S3 S4 S5)
[ 13.595270] ACPI: Using IOAPIC for interrupt routing
[ 13.603055] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.603066] PCI: Probing PCI hardware (bus 00)
[ 13.603794] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.603975] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 13.604062] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 13.604140] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 13.612788] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[ 13.612932] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 13.613039] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.613146] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
[ 13.613253] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 13.613359] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.613466] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *10 11 12 14 15)
[ 13.613599] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[ 13.613714] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.613733] pnp: PnP ACPI init
[ 13.613745] ACPI: bus type pnp registered
[ 13.617874] pnp: PnP ACPI: found 12 devices
[ 13.617878] ACPI: ACPI bus type pnp unregistered
[ 13.617941] PCI: Using ACPI for IRQ routing
[ 13.617945] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 13.617957] PCI: Cannot allocate resource region 0 of device 0000:00:00.0
[ 13.618058] NET: Registered protocol family 8
[ 13.618060] NET: Registered protocol family 20
[ 13.618128] agpgart: Detected AGP bridge 0
[ 13.620352] agpgart: AGP aperture is 64M @ 0xf4000000
[ 13.620434] pnp: 00:0a: ioport range 0x290-0x297 has been reserved
[ 13.620442] pnp: 00:0b: iomem range 0xfff80000-
[ 13.620446] pnp: 00:0b: iomem range 0xffee0000-
[ 13.620450] pnp: 00:0b: iomem range 0xfee00400-
[ 13.620741] PCI: Bridge: 0000:00:01.0
[ 13.620744] IO window: c000-cfff
[ 13.620749] MEM window: fbf00000-fbffffff
[ 13.620753] PREFETCH window: e8000000-f3ffffff
[ 13.620757] PCI: Bridge: 0000:00:06.0
[ 13.620760] IO window: d000-dfff
[ 13.620764] MEM window: disabled.
[ 13.620766] PREFETCH window: disabled.
[ 13.620770] PCI: Bridge: 0000:00:07.0
[ 13.620773] IO window: e000-efff
[ 13.620777] MEM window: disabled.
[ 13.620780] PREFETCH window: disabled.
[ 13.620799] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 13.620809] PCI: Setting latency timer of device 0000:00:07.0 to 64
[ 13.620865] NET: Registered protocol family 2
[ 13.623341] Time: tsc clocksource has been installed.
[ 13.659361] IP route cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 13.659447] TCP established hash table entries: 16384 (order: 6, 393216 bytes)
[ 13.659736] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[ 13.659952] TCP: Hash tables configured (established 16384 bind 16384)
[ 13.659955] TCP reno registered
[ 13.671440] checking if image is initramfs... it is
[ 14.382212] Freeing initrd memory: 7209k freed
[ 14.388890] audit: initializing netlink socket (disabled)
[ 14.388903] audit(119091398
[ 14.390992] VFS: Disk quotas dquot_6.5.1
[ 14.391053] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 14.391155] io scheduler noop registered
[ 14.391157] io scheduler anticipatory registered
[ 14.391159] io scheduler deadline registered
[ 14.391255] io scheduler cfq registered (default)
[ 22.471061] 0000:00:03.3 EHCI: BIOS handoff failed (BIOS bug ?) 01010001
[ 22.471325] Boot video device is 0000:01:00.0
[ 22.502808] Real Time Clock Driver v1.12ac
[ 22.502888] Linux agpgart interface v0.102 (c) Dave Jones
[ 22.502891] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 22.503823] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 22.504158] 00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 22.504893] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 22.505118] input: Macintosh mouse button emulation as /class/input/input0
[ 22.505194] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 22.505197] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 22.505468] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 22.505473] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 22.505629] mice: PS/2 mouse device common for all mice
[ 22.505839] TCP cubic registered
[ 22.505926] NET: Registered protocol family 1
[ 22.506120] /build/
[ 22.506128] Freeing unused kernel memory: 300k freed
[ 22.535077] input: AT Translated Set 2 keyboard as /class/input/input1
[ 23.735570] AppArmor: AppArmor initialized
[ 23.735580] audit(119091399
[ 23.735582]
[ 23.743654] fuse init (API version 7.8)
[ 23.749663] AppArmor: Registered secondary security module: capability.
[ 23.749667] Capability LSM initialized as secondary
[ 24.432122] SCSI subsystem initialized
[ 24.438140] libata version 2.21 loaded.
[ 24.439793] pata_sis 0000:00:02.5: version 0.5.1
[ 24.439953] scsi0 : pata_sis
[ 24.439997] scsi1 : pata_sis
[ 24.440026] ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
[ 24.440031] ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
[ 24.449496] usbcore: registered new interface driver usbfs
[ 24.449523] usbcore: registered new interface driver hub
[ 24.449546] usbcore: registered new device driver usb
[ 24.450436] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 24.534770] natsemi dp8381x driver, version 2.1, Sept 11, 2006
[ 24.534772] originally by Donald Becker <email address hidden>
[ 24.534774] 2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
[ 24.639225] Floppy drive(s): fd0 is 1.44M
[ 24.680611] FDC 0 is a post-1991 82077
[ 25.280635] ata2.00: ATAPI: TSSTcorpDVD-ROM SH-D162C, TS02, max UDMA/33
[ 25.280643] ata2.01: ATAPI: PHILIPS SPD2400L1, Y5H3, max UDMA/66
[ 25.468459] ata2.00: configured for UDMA/33
[ 25.656288] ata2.01: configured for UDMA/66
[ 25.656854] scsi 1:0:0:0: CD-ROM TSSTcorp DVD-ROM SH-D162C TS02 PQ: 0 ANSI: 5
[ 25.658086] scsi 1:0:1:0: CD-ROM PHILIPS SPD2400L1 Y5H3 PQ: 0 ANSI: 5
[ 25.661720] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 25.661799] ohci_hcd 0000:00:03.0: OHCI Host Controller
[ 25.662269] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[ 25.662292] ohci_hcd 0000:00:03.0: irq 20, io mem 0xfbefc000
[ 25.681916] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
[ 25.681922] Uniform CD-ROM driver Revision: 3.20
[ 25.682206] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 25.687810] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
[ 25.688058] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 25.691817] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 25.691843] sr 1:0:1:0: Attached scsi generic sg1 type 5
[ 25.722150] usb usb1: configuration #1 chosen from 1 choice
[ 25.722182] hub 1-0:1.0: USB hub found
[ 25.722193] hub 1-0:1.0: 3 ports detected
[ 25.828044] ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 25.828123] ohci_hcd 0000:00:03.1: OHCI Host Controller
[ 25.828177] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[ 25.828198] ohci_hcd 0000:00:03.1: irq 21, io mem 0xfbefd000
[ 25.885979] usb usb2: configuration #1 chosen from 1 choice
[ 25.886008] hub 2-0:1.0: USB hub found
[ 25.886018] hub 2-0:1.0: 3 ports detected
[ 25.991871] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 25.991948] ohci_hcd 0000:00:03.2: OHCI Host Controller
[ 25.992003] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[ 25.992025] ohci_hcd 0000:00:03.2: irq 22, io mem 0xfbefe000
[ 26.049800] usb usb3: configuration #1 chosen from 1 choice
[ 26.049830] hub 3-0:1.0: USB hub found
[ 26.049841] hub 3-0:1.0: 2 ports detected
[ 26.131622] usb 1-1: new full speed USB device using ohci_hcd and address 2
[ 26.156244] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23
[ 26.156321] ehci_hcd 0000:00:03.3: EHCI Host Controller
[ 26.156379] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[ 26.156418] PCI: cache line size of 64 is not supported by device 0000:00:03.3
[ 26.156430] ehci_hcd 0000:00:03.3: irq 23, io mem 0xfbeff000
[ 26.156438] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.156532] usb usb4: configuration #1 chosen from 1 choice
[ 26.156559] hub 4-0:1.0: USB hub found
[ 26.156567] hub 4-0:1.0: 8 ports detected
[ 26.263734] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 26.265486] natsemi eth0: NatSemi DP8381[56] at 0xfbef7000 (0000:00:09.0), 00:0f:b5:fe:59:93, IRQ 16, port TP.
[ 26.265585] sata_sis 0000:00:05.0: version 0.8
[ 26.265598] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 26.265604] sata_sis 0000:00:05.0: Detected SiS 182/965L chipset
[ 26.265689] scsi2 : sata_sis
[ 26.265740] scsi3 : sata_sis
[ 26.265773] ata3: SATA max UDMA/133 cmd 0x000000000001b000 ctl 0x000000000001a802 bmdma 0x0000000000019800 irq 17
[ 26.265779] ata4: SATA max UDMA/133 cmd 0x000000000001a400 ctl 0x000000000001a002 bmdma 0x0000000000019808 irq 17
[ 26.735070] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 26.743231] ata3.00: ATA-7: WDC WD800JD-08LSA0, 07.01D07, max UDMA/133
[ 26.743237] ata3.00: 156312576 sectors, multi 16: LBA48
[ 26.751210] ata3.00: configured for UDMA/133
[ 26.974829] usb 4-1: new high speed USB device using ehci_hcd and address 2
[ 27.107566] usb 4-1: configuration #1 chosen from 1 choice
[ 27.774072] usb 4-5: new high speed USB device using ehci_hcd and address 5
[ 27.920722] usb 4-5: configuration #1 chosen from 1 choice
[ 28.225648] usb 2-1: new full speed USB device using ohci_hcd and address 2
[ 28.436485] usb 2-1: configuration #1 chosen from 1 choice
[ 28.753150] usb 3-1: new low speed USB device using ohci_hcd and address 2
[ 28.956968] ata4: SATA link down (SStatus 1 SControl 300)
[ 28.967715] scsi 2:0:0:0: Direct-Access ATA WDC WD800JD-08LS 07.0 PQ: 0 ANSI: 5
[ 28.968340] scsi 2:0:0:0: Attached scsi generic sg2 type 0
[ 28.968955] usb 3-1: configuration #1 chosen from 1 choice
[ 28.984147] usbcore: registered new interface driver hiddev
[ 28.993382] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 28.993561] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.2-1
[ 28.993585] usbcore: registered new interface driver libusual
[ 28.995700] usbcore: registered new interface driver usbhid
[ 28.995707] /build/
[ 29.002812] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 29.002818] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 29.004977] Initializing USB Mass Storage driver...
[ 29.005049] scsi4 : SCSI emulation for USB Mass Storage devices
[ 29.005100] usb-storage: device found at 5
[ 29.005102] usb-storage: waiting for device to settle before scanning
[ 29.005143] scsi5 : SCSI emulation for USB Mass Storage devices
[ 29.005176] usb-storage: device found at 2
[ 29.005178] usb-storage: waiting for device to settle before scanning
[ 29.005192] usbcore: registered new interface driver usb-storage
[ 29.005195] USB Mass Storage support registered.
[ 29.012960] sd 2:0:0:0: [sda] 156312576 512-byte hardware sectors (80032 MB)
[ 29.013783] sd 2:0:0:0: [sda] Write Protect is off
[ 29.013787] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.017741] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.017826] sd 2:0:0:0: [sda] 156312576 512-byte hardware sectors (80032 MB)
[ 29.017838] sd 2:0:0:0: [sda] Write Protect is off
[ 29.017841] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 29.017856] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.017863] sda: sda1 sda2 sda3
[ 29.036101] sd 2:0:0:0: [sda] Attached SCSI disk
[ 29.258836] Attempting manual resume
[ 29.258840] swsusp: Resume From Partition 8:2
[ 29.258842] PM: Checking swsusp image.
[ 29.259058] PM: Resume from disk failed.
[ 29.276351] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 29.276356] EXT3-fs: write access will be enabled during recovery.
[ 31.724159] kjournald starting. Commit interval 5 seconds
[ 31.724178] EXT3-fs: sda1: orphan cleanup on readonly fs
[ 31.724185] ext3_orphan_
[[...multiple repetitions of above...]]
[ 32.865018] ext3_orphan_
[ 32.870416] EXT3-fs: sda1: 285 orphan inodes deleted
[ 32.870418] EXT3-fs: recovery complete.
[ 33.041804] EXT3-fs: mounted filesystem with ordered data mode.
[ 34.000742] usb-storage: device scan complete
[ 34.001481] scsi 4:0:0:0: Direct-Access Generic STORAGE DEVICE 9321 PQ: 0 ANSI: 0
[ 34.001638] usb-storage: device scan complete
[ 34.002176] scsi 4:0:0:1: Direct-Access Generic STORAGE DEVICE 9321 PQ: 0 ANSI: 0
[ 34.002843] scsi 4:0:0:2: Direct-Access Generic STORAGE DEVICE 9321 PQ: 0 ANSI: 0
[ 34.003467] scsi 4:0:0:3: Direct-Access Generic STORAGE DEVICE 9321 PQ: 0 ANSI: 0
[ 34.004636] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 34.004672] sd 4:0:0:0: Attached scsi generic sg3 type 0
[ 34.005611] sd 4:0:0:1: [sdc] Attached SCSI removable disk
[ 34.005646] sd 4:0:0:1: Attached scsi generic sg4 type 0
[ 34.006609] sd 4:0:0:2: [sdd] Attached SCSI removable disk
[ 34.006636] sd 4:0:0:2: Attached scsi generic sg5 type 0
[ 34.007608] sd 4:0:0:3: [sde] Attached SCSI removable disk
[ 34.007645] sd 4:0:0:3: Attached scsi generic sg6 type 0
[ 34.010640] scsi 5:0:0:0: Direct-Access IOMEGA ZIP 250 79.U PQ: 0 ANSI: 0 CCS
[ 34.043587] sd 5:0:0:0: [sdf] Spinning up disk....<5>sd 5:0:0:0: [sdf] Attached SCSI removable disk
[ 35.060648] sd 5:0:0:0: Attached scsi generic sg7 type 0
[ 41.371152] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 41.537529] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.339772] input: PC Speaker as /class/input/input3
[ 42.482567] parport_pc 00:09: reported by Plug and Play ACPI
[ 42.482668] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,
[ 42.996351] ieee80211_crypt: registered algorithm 'NULL'
[ 43.037077] ieee80211: 802.11 data/management
[ 43.037082] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 43.117148] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18
[ 43.355397] usb 4-1: reset high speed USB device using ehci_hcd and address 2
[ 43.543225] intel8x0_
[ 43.543231] intel8x0: clocking to 48000
[ 43.578463] zd1211rw 4-1:1.0: firmware version 4725
[ 43.620412] zd1211rw 4-1:1.0: zd1211b chip 050d:705c v4810 high 00-17-3f AL2230_RF pa0 g--NS
[ 43.622996] zd1211rw 4-1:1.0: eth1
[ 43.623017] usbcore: registered new interface driver zd1211rw
[ 44.664319] lp0: using parport0 (interrupt-driven).
[ 44.746950] Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
[ 44.914619] EXT3 FS on sda1, internal journal
[ 53.582223] kjournald starting. Commit interval 5 seconds
[ 53.582461] EXT3 FS on sda3, internal journal
[ 53.582466] EXT3-fs: mounted filesystem with ordered data mode.
[ 53.769583] AppArmor: Unregistered secondary security module: capability
[ 53.960546] AppArmor: INTERFACE: Invalid end of profile in profile /usr/sbin/cupsd
[ 54.580208] input: Power Button (FF) as /class/input/input4
[ 54.585671] ACPI: Power Button (FF) [PWRF]
[ 54.620706] input: Power Button (CM) as /class/input/input5
[ 54.626092] ACPI: Power Button (CM) [PWRB]
[ 54.642243] No dock devices found.
[ 55.034524] powernow-k8: Power state transitions not supported
[ 56.899373] eth0: DSPCFG accepted after 0 usec.
[ 57.577451] AppArmor: Registered secondary security module: capability.
[ 57.577456] Capability LSM initialized as secondary
[ 57.764582] Bluetooth: Core ver 2.11
[ 57.764841] NET: Registered protocol family 31
[ 57.764844] Bluetooth: HCI device and connection manager initialized
[ 57.764848] Bluetooth: HCI socket layer initialized
[ 57.777772] Bluetooth: L2CAP ver 2.8
[ 57.777777] Bluetooth: L2CAP socket layer initialized
[ 57.848698] Bluetooth: RFCOMM socket layer initialized
[ 57.848794] Bluetooth: RFCOMM TTY layer initialized
[ 57.848797] Bluetooth: RFCOMM ver 1.8
[ 314.151028] Machine check events logged
[ 637.141938] NET: Registered protocol family 10
[ 637.142104] lo: Disabled Privacy Extensions
[ 637.142223] ADDRCONF(
[ 637.142302] ADDRCONF(
[ 682.593779] NET: Registered protocol family 17
[ 683.051814] SoftMAC: Open Authentication completed with 00:18:39:8a:ce:3b
[ 683.071156] ADDRCONF(
[ 684.078819] ieee80211_crypt: registered algorithm 'TKIP'
[ 702.243243] eth1: no IPv6 routers present
ProblemType: Package
Architecture: amd64
Date: Thu Sep 27 18:15:09 2007
DistroRelease: Ubuntu 7.10
ErrorMessage: dependency problems - leaving unconfigured
Package: network-
PackageArchitec
SourcePackage: network-
Title: package network-
Uname: Linux cobra 2.6.22-9-generic #1 SMP Fri Aug 3 00:20:35 GMT 2007 x86_64 GNU/Linux
Ditto here. It's a HAL thing...