Comment 1 for bug 860064

Something is definitely not consistent:

ubuntu@churel:~$ sudo mii-tool -v eth0
eth0: negotiated 1000baseT-FD flow-control, link ok
  product info: vendor 00:d8:97, model 34 rev 0
  basic mode: autonegotiation enabled
  basic status: autonegotiation complete, link ok
  capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD
  advertising: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
  link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control
ubuntu@churel:~$ sudo ethtool eth0
Settings for eth0:
 Supported ports: [ TP ]
 Supported link modes: 10baseT/Half 10baseT/Full
                         100baseT/Half 100baseT/Full
                         1000baseT/Half 1000baseT/Full
 Supported pause frame use: No
 Supports auto-negotiation: Yes
 Advertised link modes: 10baseT/Half 10baseT/Full
                         100baseT/Half 100baseT/Full
                         1000baseT/Half 1000baseT/Full
 Advertised pause frame use: Symmetric
 Advertised auto-negotiation: Yes
 Link partner advertised link modes: 10baseT/Half 10baseT/Full
                                      100baseT/Half 100baseT/Full
                                      1000baseT/Full
 Link partner advertised pause frame use: Symmetric Receive-only
 Link partner advertised auto-negotiation: Yes
 Speed: 1000Mb/s
 Duplex: Full
 Port: Twisted Pair
 PHYAD: 1
 Transceiver: internal
 Auto-negotiation: on
 MDI-X: on
 Supports Wake-on: g
 Wake-on: g
 Current message level: 0x000000ff (255)
          drv probe link timer ifdown ifup rx_err tx_err
 Link detected: yes
ubuntu@churel:~$