multipath.conf follows. The file is heavily commented so I trimmed all comments out
defaults { user_friendly_names yes } blacklist { devnode "^(ram|raw|loop|fd|md|dm-|sr|scd|st)[-1-9]*" devnode "^hd[a-z][[0-9]*]" wwid 3600508b1001cea3b91ee45c710e467a7 #sda devnode "sr0" }
devices { device { vendor "HITACHI " product "DF600F.*" no_path_retry queue prio const path_grouping_policy multibus getuid_callout "/lib/udev/scsi_id --whitelisted --device=/dev/%n" checker tur } }
Here's the _full_ output of multipath -ll # multipath -ll Error: : Inappropriate ioctl for device cciss TUR failed in CCISS_GETLUNINFO: Inappropriate ioctl for device <---- mpath0 (360060e80104dac0004f349c800000000) dm-0 HITACHI,DF600F size=100G features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='round-robin 0' prio=1 status=active | `- 5:0:0:0 sdc 8:32 active ready running `-+- policy='round-robin 0' prio=0 status=enabled `- 4:0:0:0 sdb 8:16 active ready running
I cannot flush even when the multipath and iscsi daemon are stopped. # multipath -F Jul 10 20:46:12 | mpath0: map in use
mpath0 is used by device-mapper # dmsetup ls mpath0-part1 (252, 1) mpath0 (252, 0)
multipath.conf follows. The file is heavily commented so I trimmed all comments out
defaults { names yes raw|loop| fd|md|dm- |sr|scd| st)[-1- 9]*" 3b91ee45c710e46 7a7 #sda
user_friendly_
}
blacklist {
devnode "^(ram|
devnode "^hd[a-z][[0-9]*]"
wwid 3600508b1001cea
devnode "sr0"
}
devices { grouping_ policy multibus
device {
vendor "HITACHI "
product "DF600F.*"
no_path_retry queue
prio const
path_
getuid_callout "/lib/udev/scsi_id --whitelisted --device=/dev/%n"
checker tur
}
}
Here's the _full_ output of multipath -ll c0004f349c80000 0000) dm-0 HITACHI,DF600F
# multipath -ll
Error: : Inappropriate ioctl for device
cciss TUR failed in CCISS_GETLUNINFO: Inappropriate ioctl for device <----
mpath0 (360060e80104da
size=100G features='1 queue_if_no_path' hwhandler='0' wp=rw
|-+- policy='round-robin 0' prio=1 status=active
| `- 5:0:0:0 sdc 8:32 active ready running
`-+- policy='round-robin 0' prio=0 status=enabled
`- 4:0:0:0 sdb 8:16 active ready running
I cannot flush even when the multipath and iscsi daemon are stopped.
# multipath -F
Jul 10 20:46:12 | mpath0: map in use
mpath0 is used by device-mapper
# dmsetup ls
mpath0-part1 (252, 1)
mpath0 (252, 0)