Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/pci0000:00/0000:00:1e.0/0000:02:00.0/0000:03:00.0/tty/noz2':
KERNEL=="noz2"
SUBSYSTEM=="tty"
DRIVER==""
# udevadm info -a -n /dev/noz2
Udevadm info starts with the device specified by the devpath and then
walks up the chain of parent devices. It prints for every device
found, all possible attributes in the udev rules key format.
A rule to match, can be composed by the attributes of the device
and the attributes from one single parent device.
looking at device '/devices/ pci0000: 00/0000: 00:1e.0/ 0000:02: 00.0/0000: 03:00.0/ tty/noz2' : ="tty"
KERNEL=="noz2"
SUBSYSTEM=
DRIVER==""
looking at parent device '/devices/ pci0000: 00/0000: 00:1e.0/ 0000:02: 00.0/0000: 03:00.0' : ="0000: 03:00.0" ="pci" ="nozomi" irq}==" 16" subsystem_ vendor} =="0x0000" broken_ parity_ status} =="0" class}= ="0x028000" consistent_ dma_mask_ bits}== "32" dma_mask_ bits}== "32" local_cpus} =="ff" card_type} =="2048" device} =="0x000c" enable} =="1" open_ttys} =="0" msi_bus} =="" local_cpulist} =="0-7" vendor} =="0x1931" subsystem_ device} =="0x0000"
KERNELS=
SUBSYSTEMS=
DRIVERS=
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
looking at parent device '/devices/ pci0000: 00/0000: 00:1e.0/ 0000:02: 00.0': ="0000: 02:00.0" ="pci" ="yenta_ cardbus" irq}==" 16" subsystem_ vendor} =="0x1014" broken_ parity_ status} =="0" class}= ="0x060700" consistent_ dma_mask_ bits}== "32" dma_mask_ bits}== "32" local_cpus} =="ff" device} =="0x0476" enable} =="2" msi_bus} =="1" local_cpulist} =="0-7" vendor} =="0x1180" subsystem_ device} =="0x0555"
KERNELS=
SUBSYSTEMS=
DRIVERS=
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
looking at parent device '/devices/ pci0000: 00/0000: 00:1e.0' : ="0000: 00:1e.0" ="pci" subsystem_ vendor} =="0x0000" broken_ parity_ status} =="0" class}= ="0x060400" consistent_ dma_mask_ bits}== "32" dma_mask_ bits}== "32" local_cpus} =="ff" device} =="0x2448" enable} =="1" msi_bus} =="1" local_cpulist} =="0-7" vendor} =="0x8086" subsystem_ device} =="0x0000"
KERNELS=
SUBSYSTEMS=
DRIVERS==""
ATTRS{irq}=="0"
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
ATTRS{
looking at parent device '/devices/ pci0000: 00': ="pci0000: 00"
KERNELS=
SUBSYSTEMS==""
DRIVERS==""
And it's not an USB device, it's a PCCard. It hangs on the PCI bus.