bmi log
juan@region:~$ sudo bmc-config --checkout
[sudo] password for
#
# Section UserX Comments
#
# In the following User sections, users should configure usernames, passwords,
# and access rights for IPMI over LAN communication. Usernames can be set to any
# string with the exception of User1, which is a fixed to the "anonymous"
# username in IPMI.
#
# For IPMI over LAN access for a username, set "Enable_User" to "Yes",
# "Lan_Enable_IPMI_Msgs" to "Yes", and "Lan_Privilege_Limit" to a privilege
# level. The privilege level is used to limit various IPMI operations for
# individual usernames. It is recommened that atleast one username be created
# with a privilege limit "Administrator", so all system functions are available
# to atleast one username via IPMI over LAN. For security reasons, we recommend
# not enabling the "anonymous" User1. For most users, "Lan_Session_Limit" can be
# set to 0 (or ignored) to support an unlimited number of simultaneous IPMI over
# LAN sessions.
#
# If your system supports IPMI 2.0 and Serial-over-LAN (SOL),
# a"SOL_Payload_Access" field may be listed below. Set the "SOL_Payload_Access"
# field to "Yes" or "No" to enable or disable this username's ability to access
# SOL.
#
# Please do not forget to uncomment those fields, such as "Password", that may
# be commented out during the checkout.
#
# Some motherboards may require a "Username" to be configured prior to other
# fields being read/written. If this is the case, those fields will be set to
# <username-not-set-yet>.
#
Section User1
## Give Username
## Username NULL
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_IPMI_Msgs No
## Possible values: Yes/No
Lan_Enable_Link_Auth No
## Possible values: Yes/No
Lan_Enable_Restricted_to_Callback No
## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
Lan_Privilege_Limit No_Access
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User2
## Give Username
Username root
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_IPMI_Msgs Yes
## Possible values: Yes/No
Lan_Enable_Link_Auth Yes
## Possible values: Yes/No
Lan_Enable_Restricted_to_Callback No
## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
Lan_Privilege_Limit Administrator
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User3
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_IPMI_Msgs No
## Possible values: Yes/No
Lan_Enable_Link_Auth No
## Possible values: Yes/No
Lan_Enable_Restricted_to_Callback No
## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
Lan_Privilege_Limit No_Access
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User4
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_IPMI_Msgs No
## Possible values: Yes/No
Lan_Enable_Link_Auth No
## Possible values: Yes/No
Lan_Enable_Restricted_to_Callback No
## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
Lan_Privilege_Limit No_Access
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User5
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_IPMI_Msgs No
## Possible values: Yes/No
Lan_Enable_Link_Auth No
## Possible values: Yes/No
Lan_Enable_Restricted_to_Callback No
## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
Lan_Privilege_Limit No_Access
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User6
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_IPMI_Msgs No
## Possible values: Yes/No
Lan_Enable_Link_Auth No
## Possible values: Yes/No
Lan_Enable_Restricted_to_Callback No
## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
Lan_Privilege_Limit No_Access
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User7
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_IPMI_Msgs No
## Possible values: Yes/No
Lan_Enable_Link_Auth No
## Possible values: Yes/No
Lan_Enable_Restricted_to_Callback No
## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
Lan_Privilege_Limit No_Access
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User8
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_IPMI_Msgs No
## Possible values: Yes/No
Lan_Enable_Link_Auth No
## Possible values: Yes/No
Lan_Enable_Restricted_to_Callback No
## Possible values: Callback/User/Operator/Administrator/OEM_Proprietary/No_Access
Lan_Privilege_Limit No_Access
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User9
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_IPMI_Msgs No
juancc2007@region:~$
bmi log IPMI_Msgs" to "Yes", and "Lan_Privilege_ Limit" to a privilege Access" field may be listed below. Set the "SOL_Payload_ Access" not-set- yet>. IPMI_Msgs No Link_Auth No Restricted_ to_Callback No User/Operator/ Administrator/ OEM_Proprietary /No_Access Limit No_Access IPMI_Msgs Yes Link_Auth Yes Restricted_ to_Callback No User/Operator/ Administrator/ OEM_Proprietary /No_Access Limit Administrator IPMI_Msgs No Link_Auth No Restricted_ to_Callback No User/Operator/ Administrator/ OEM_Proprietary /No_Access Limit No_Access IPMI_Msgs No Link_Auth No Restricted_ to_Callback No User/Operator/ Administrator/ OEM_Proprietary /No_Access Limit No_Access IPMI_Msgs No Link_Auth No Restricted_ to_Callback No User/Operator/ Administrator/ OEM_Proprietary /No_Access Limit No_Access IPMI_Msgs No Link_Auth No Restricted_ to_Callback No User/Operator/ Administrator/ OEM_Proprietary /No_Access Limit No_Access IPMI_Msgs No Link_Auth No Restricted_ to_Callback No User/Operator/ Administrator/ OEM_Proprietary /No_Access Limit No_Access IPMI_Msgs No Link_Auth No Restricted_ to_Callback No User/Operator/ Administrator/ OEM_Proprietary /No_Access Limit No_Access IPMI_Msgs No region: ~$
juan@region:~$ sudo bmc-config --checkout
[sudo] password for
#
# Section UserX Comments
#
# In the following User sections, users should configure usernames, passwords,
# and access rights for IPMI over LAN communication. Usernames can be set to any
# string with the exception of User1, which is a fixed to the "anonymous"
# username in IPMI.
#
# For IPMI over LAN access for a username, set "Enable_User" to "Yes",
# "Lan_Enable_
# level. The privilege level is used to limit various IPMI operations for
# individual usernames. It is recommened that atleast one username be created
# with a privilege limit "Administrator", so all system functions are available
# to atleast one username via IPMI over LAN. For security reasons, we recommend
# not enabling the "anonymous" User1. For most users, "Lan_Session_Limit" can be
# set to 0 (or ignored) to support an unlimited number of simultaneous IPMI over
# LAN sessions.
#
# If your system supports IPMI 2.0 and Serial-over-LAN (SOL),
# a"SOL_Payload_
# field to "Yes" or "No" to enable or disable this username's ability to access
# SOL.
#
# Please do not forget to uncomment those fields, such as "Password", that may
# be commented out during the checkout.
#
# Some motherboards may require a "Username" to be configured prior to other
# fields being read/written. If this is the case, those fields will be set to
# <username-
#
Section User1
## Give Username
## Username NULL
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Callback/
Lan_Privilege_
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User2
## Give Username
Username root
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Callback/
Lan_Privilege_
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User3
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Callback/
Lan_Privilege_
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User4
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Callback/
Lan_Privilege_
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User5
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Callback/
Lan_Privilege_
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User6
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Callback/
Lan_Privilege_
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User7
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Callback/
Lan_Privilege_
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User8
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Yes/No
Lan_Enable_
## Possible values: Callback/
Lan_Privilege_
## Possible values: 0-17, 0 is unlimited; May be reset to 0 if not specified
## Lan_Session_Limit
EndSection
Section User9
## Give Username
Username
## Give password or blank to clear. MAX 16 chars (20 chars if IPMI 2.0 supported).
## Password
## Possible values: Yes/No or blank to not set
## Enable_User
## Possible values: Yes/No
Lan_Enable_
juancc2007@