Sound card takes time to be initialised
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
Linux |
Fix Released
|
Medium
|
|||
linux (Ubuntu) |
Fix Released
|
Low
|
Unassigned |
Bug Description
It seems my sound card takes time to be initialised. `dmesg` shows me a lot of lines with: "hda-intel: spurious response". After that I have this line: "hda_intel: azx_get_response timeout, switching to single_cmd mode" and then a lot of lines with this message: "hda-codec: out of range" Note that the sound work but it's a bit annoying because ligthdm is frozen until the sound works...
According to this document:
=> http://
It seems that it's a knowing bug but how can I help to fix it? :)
WORKAROUND: I can load snd-hda-intel module with this option:
probe_mask=0x103
or by adding this line in /etc/modprobe.
options snd-hda-intel probe_mask=0x103
I still have no sound at start-up (the first 30-40 seconds) and I still have a lot of errors messages with dmesg but now lightdm is no longer frozen for a few time.
ProblemType: Bug
DistroRelease: Ubuntu 12.04
Package: linux-image-
ProcVersionSign
Uname: Linux 3.2.0-23-generic x86_64
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.24.
ApportVersion: 2.0.1-0ubuntu5
Architecture: amd64
ArecordDevices:
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/
/dev/snd/
/dev/snd/pcmC0D0p: mbaerts 2064 F...m pulseaudio
Card0.Amixer.info:
Card hw:0 'Intel'/'HDA Intel at 0xf1e00000 irq 49'
Mixer name : 'Realtek ALC269VB'
Components : 'HDA:10ec0269,
Controls : 26
Simple ctrls : 14
Card1.Amixer.info:
Card hw:1 'HDMI'/'HDA ATI HDMI at 0xf0030000 irq 50'
Mixer name : 'ATI R6xx HDMI'
Components : 'HDA:1002aa01,
Controls : 6
Simple ctrls : 1
Card1.Amixer.
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Date: Mon Apr 23 15:28:19 2012
HibernationDevice: RESUME=
InstallationMedia: Ubuntu 11.10 "Oneiric Ocelot" - Alpha amd64 (20110803.1)
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 003: ID 064e:a130 Suyin Corp.
MachineType: Medion P662X
ProcFB:
0 radeondrmfb
1 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=
RelatedPackageV
linux-
linux-
linux-firmware 1.79
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
SourcePackage: linux
StagingDrivers: mei
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 04/13/2010
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 202
dmi.board.
dmi.board.name: H36QM
dmi.board.vendor: To be filled by O.E.M.
dmi.board.version: 1.0
dmi.chassis.
dmi.chassis.type: 10
dmi.chassis.vendor: PEGATRON CORPORATION
dmi.chassis.
dmi.modalias: dmi:bvnAmerican
dmi.product.name: P662X
dmi.product.
dmi.sys.vendor: Medion
Changed in linux (Ubuntu): | |
status: | New → Confirmed |
Changed in linux (Ubuntu): | |
importance: | Undecided → Medium |
Changed in linux: | |
importance: | Unknown → Medium |
status: | Unknown → Confirmed |
Changed in linux: | |
status: | Confirmed → Fix Released |
As workaround, I can load snd-hda-intel module with this option: probe_mask=0x103
(or by adding this line:) modprobe. d/alsa- base.conf
options snd-hda-intel probe_mask=0x103
(at the end of this file:)
/etc/
I still have no sound at start-up (the first 30-40 seconds) and I still have a lot of errors messages with dmesg but now lightdm is no longer frozen for a few time.