Im sorry neither kernel 3.1rc9 nor 3.1.daily (3.1.0-999.201110171146) did solve the problem
As I've written I've tried too latest v4l git. So either the problem is in v4l itself - wrong frontend selected - or somewhere else.
As I've googled in the meanwhile i2c errors are serious, and are not related to udev (which was my faulty guess). So - as the usb id's for the device are correct - I believe now that something inside v4l goes wrong. I investigate further to find out the mystery.
196.420024] usb 1-7: new high speed USB device number 6 using ehci_hcd
[ 196.553236] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
[ 196.555478] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 196.757006] dib0700: firmware started successfully.
[ 197.260148] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 197.260220] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 197.260268] DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 197.313106] dib0700: stk7070p_frontend_attach: dib7000p_i2c_enumeration failed. Cannot continue
[ 197.313109]
[ 197.313114] dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick'
[ 197.313122] Registered IR keymap rc-dib0700-rc5
[ 197.313280] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/rc/rc1/input7
[ 197.313351] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/rc/rc1
[ 197.313479] dvb-usb: schedule remote query interval to 50 msecs.
[ 197.313483] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
3.1 daily
[ 61.092040] usb 1-7: new high speed USB device number 6 using ehci_hcd
[ 61.225319] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
[ 61.230325] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.20.fw'
[ 61.432167] dib0700: firmware started successfully.
[ 61.936187] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 61.936259] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 61.936430] DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 61.986123] dib0700: stk7070p_frontend_attach: dib7000p_i2c_enumeration failed. Cannot continue
[ 61.986126]
[ 61.986131] dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick'
[ 61.986140] Registered IR keymap rc-dib0700-rc5
[ 61.986314] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/rc/rc1/input7
[ 61.986376] rc1: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:1d.7/usb1/1-7/rc/rc1
[ 61.986574] dvb-usb: schedule remote query interval to 50 msecs.
[ 61.986578] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
Im sorry neither kernel 3.1rc9 nor 3.1.daily (3.1.0- 999.20111017114 6) did solve the problem
As I've written I've tried too latest v4l git. So either the problem is in v4l itself - wrong frontend selected - or somewhere else.
As I've googled in the meanwhile i2c errors are serious, and are not related to udev (which was my faulty guess). So - as the usb id's for the device are correct - I believe now that something inside v4l goes wrong. I investigate further to find out the mystery.
BTW. another user is affected see : http:// forum.ubuntuuse rs.de/topic/ dvb-t-stick- wird-von- kaffeine- nicht-mehr- erkannt/ (regards, german only)
dmesg ouputs:
3.1 rc9
196.420024] usb 1-7: new high speed USB device number 6 using ehci_hcd dib0700- 1.20.fw' frontend_ attach: dib7000p_ i2c_enumeration failed. Cannot continue pci0000: 00/0000: 00:1d.7/ usb1/1- 7/rc/rc1/ input7 pci0000: 00/0000: 00:1d.7/ usb1/1- 7/rc/rc1
[ 196.553236] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
[ 196.555478] dvb-usb: downloading firmware from file 'dvb-usb-
[ 196.757006] dib0700: firmware started successfully.
[ 197.260148] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 197.260220] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 197.260268] DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 197.313106] dib0700: stk7070p_
[ 197.313109]
[ 197.313114] dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick'
[ 197.313122] Registered IR keymap rc-dib0700-rc5
[ 197.313280] input: IR-receiver inside an USB DVB receiver as /devices/
[ 197.313351] rc1: IR-receiver inside an USB DVB receiver as /devices/
[ 197.313479] dvb-usb: schedule remote query interval to 50 msecs.
[ 197.313483] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
3.1 daily
[ 61.092040] usb 1-7: new high speed USB device number 6 using ehci_hcd dib0700- 1.20.fw' frontend_ attach: dib7000p_ i2c_enumeration failed. Cannot continue pci0000: 00/0000: 00:1d.7/ usb1/1- 7/rc/rc1/ input7 pci0000: 00/0000: 00:1d.7/ usb1/1- 7/rc/rc1
[ 61.225319] dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to load a firmware
[ 61.230325] dvb-usb: downloading firmware from file 'dvb-usb-
[ 61.432167] dib0700: firmware started successfully.
[ 61.936187] dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
[ 61.936259] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 61.936430] DVB: registering new adapter (Hauppauge Nova-T Stick)
[ 61.986123] dib0700: stk7070p_
[ 61.986126]
[ 61.986131] dvb-usb: no frontend was attached by 'Hauppauge Nova-T Stick'
[ 61.986140] Registered IR keymap rc-dib0700-rc5
[ 61.986314] input: IR-receiver inside an USB DVB receiver as /devices/
[ 61.986376] rc1: IR-receiver inside an USB DVB receiver as /devices/
[ 61.986574] dvb-usb: schedule remote query interval to 50 msecs.
[ 61.986578] dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.