ath5k card disconnects after a while
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Expired
|
Undecided
|
Unassigned |
Bug Description
Binary package hint: linux-image-
I think that this happens because kernel can't change the regulatory domain of the module that is stuck in a unknown setting.
This is a regression, because it doesn't in linux 2.6.35
dmesg says this (the mac address is obliously obfuscated),
[ 214.763002] wlan0: authenticate with 00:0c:f6:xxx (try 1)
[ 214.780678] wlan0: authenticated
[ 214.780755] wlan0: associate with 00:0c:f6:xxx (try 1)
[ 214.847285] wlan0: RX AssocResp from 00:0c:f6:a3:03:c4 (capab=0x411 status=0 aid=3)
[ 214.847293] wlan0: associated
[ 214.848077] cfg80211: Calling CRDA for country: AT
[ 214.857172] cfg80211: Updating information on frequency 2412 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857180] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857183] cfg80211: Updating information on frequency 2417 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857187] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857190] cfg80211: Updating information on frequency 2422 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857194] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857197] cfg80211: Updating information on frequency 2427 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857201] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857204] cfg80211: Updating information on frequency 2432 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857207] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857210] cfg80211: Updating information on frequency 2437 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857214] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857217] cfg80211: Updating information on frequency 2442 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857220] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857223] cfg80211: Updating information on frequency 2447 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857227] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857230] cfg80211: Updating information on frequency 2452 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857233] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857236] cfg80211: Updating information on frequency 2457 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857240] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857243] cfg80211: Updating information on frequency 2462 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857246] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857249] cfg80211: Updating information on frequency 2467 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857253] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857256] cfg80211: Updating information on frequency 2472 MHz for a 20 MHz width channel with regulatory rule:
[ 214.857259] cfg80211: 2402000 KHz - 2482000 KHz @ KHz), (N/A mBi, 2000 mBm)
[ 214.857262] cfg80211: Disabling freq 2484 MHz
[ 214.857270] cfg80211: Regulatory domain changed to country: AT
[ 214.857272] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 214.857276] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 214.857279] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 214.857282] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 214.857285] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
[ 219.388990] cfg80211: All devices are disconnected, going to restore regulatory settings
[ 219.389001] cfg80211: Restoring regulatory settings
[ 219.389008] cfg80211: Calling CRDA to update world regulatory domain
[ 219.397837] cfg80211: Ignoring regulatory request Set by core since the driver uses its own custom regulatory domain
[ 219.397849] cfg80211: World regulatory domain updated:
[ 219.397852] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 219.397856] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 219.397860] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 219.397863] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 219.397866] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 219.397869] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 220.249456] wlan0: authenticate with 00:0c:f6:xxx (try 1)
[ 220.453207] wlan0: authenticate with 00:0c:f6:xxx (try 2)
[ 220.653242] wlan0: authenticate with 00:0c:f6:xxx (try 3)
[ 220.853353] wlan0: authentication with 00:0c:f6:xxx timed out
ProblemType: Bug
DistroRelease: Ubuntu 11.04
Package: linux-image-
Regression: Yes
Reproducible: No
ProcVersionSign
Uname: Linux 2.6.38-8-generic i686
AcpiTables:
Error: command ['gksu', '-D', 'Apport', '--', '/usr/share/
File "/usr/share/
tables = os.listdir(path)
OSError: [Errno 2] No such file or directory: '/sys/firmware/
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.23.
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/
CRDA: Error: [Errno 2] File o directory non esistente
Card0.Amixer.info:
Card hw:0 'IXP'/'ATI IXP rev 0 with ALC250 at 0xf0000400, irq 10'
Mixer name : 'Realtek ALC250 rev 2'
Components : 'AC97a:414c4752'
Controls : 33
Simple ctrls : 21
Card1.Amixer.info:
Card hw:1 'Modem'/'ATI IXP Modem rev 1 at 0xf0000500, irq 10'
Mixer name : 'Silicon Laboratory Si3036,8 rev 7'
Components : 'AC97m:53494c27'
Controls : 3
Simple ctrls : 3
Card1.Codecs.
1-1/0: Silicon Laboratory Si3036,8 rev 7
Extended modem ID: codec=1 LIN1
Modem status : GPIO MREF ADC1 DAC1 PRE(ADC2) PRF(DAC2) PRG(HADC) PRH(HDAC)
Line1 rate : 8000Hz
CheckboxSubmission: d8986a9048eb2b6
CheckboxSystem: b1865df84255b87
Date: Wed Apr 13 18:28:28 2011
Frequency: I don't know.
HibernationDevice: RESUME=
InstallationMedia: Ubuntu-Netbook 10.10 "Maverick Meerkat" - Release i386 (20101007)
Lsusb: Error: command ['lsusb'] failed with exit code 1:
MachineType: TOSHIBA Satellite A60
PccardctlIdent:
Socket 0:
no product info available
PccardctlStatus:
Socket 0:
no card
ProcEnviron:
LANGUAGE=it_IT:en
LANG=it_IT.UTF-8
SHELL=/bin/bash
ProcKernelCmdLine: BOOT_IMAGE=
RelatedPackageV
linux-
linux-
linux-firmware 1.50
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
SourcePackage: linux
UpgradeStatus: Upgraded to natty on 2011-04-12 (1 days ago)
dmi.bios.date: 03/04/2005
dmi.bios.vendor: TOSHIBA
dmi.bios.version: Version 1.90
dmi.board.name: Portable PC
dmi.board.vendor: TOSHIBA
dmi.board.version: Version A0
dmi.chassis.
dmi.chassis.type: 8
dmi.chassis.vendor: TOSHIBA
dmi.chassis.
dmi.modalias: dmi:bvnTOSHIBA:
dmi.product.name: Satellite A60
dmi.product.
dmi.sys.vendor: TOSHIBA
Changed in linux (Ubuntu): | |
status: | New → Confirmed |
I want to say that I live in Italy, but the domain chosen is AT, Austria. I don't know why.