DVB-T USB tuner dib0700 wrong initiated (no "cold state" step)
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Confirmed
|
Undecided
|
Unassigned |
Bug Description
Hi,
I'm running fully uptodate Ubuntu 10.04 and have the following problem with my DVB-T USB stick Terratec Cinergy T USB XXS (dib0700).
The DVB-T stick is always attached to my PC and sometimes it doesn't work properly. Meaning I get a I/O error message while trying to watch TV with Kaffeine player (s. below DiB0070 I2C read failed). More over if I disconnect the stick there are NO messages about that events in kernel.log and any other USD device shows the same behavior - it doesn't work and there are no messages in reknel.log by connecting or disconnecting it.
I noticed that this happens every time when the stick immediately found in warm state and the step of loading the firmware (dvb-usb-
This is the kernel.log for the case the stick doesn't work
May 4 20:10:17 vsn-desktop kernel: [ 12.558714] dib0700: loaded with support for 13 different device-types
May 4 20:10:17 vsn-desktop kernel: [ 12.560036] dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
May 4 20:10:17 vsn-desktop kernel: [ 12.560707] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
May 4 20:10:17 vsn-desktop kernel: [ 12.560736] Linux video capture interface: v2.00
May 4 20:10:17 vsn-desktop kernel: [ 12.561431] DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
May 4 20:10:17 vsn-desktop kernel: [ 12.579479] bttv: driver version 0.9.18 loaded
May 4 20:10:17 vsn-desktop kernel: [ 12.579484] bttv: using 8 buffers with 2080k (520 pages) each for capture
May 4 20:10:17 vsn-desktop kernel: [ 12.580046] bttv: Bt8xx card found (0).
May 4 20:10:17 vsn-desktop kernel: [ 12.580065] alloc irq_desc for 20 on node -1
May 4 20:10:17 vsn-desktop kernel: [ 12.580068] alloc kstat_irqs on node -1
May 4 20:10:17 vsn-desktop kernel: [ 12.580078] bttv 0000:02:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
May 4 20:10:17 vsn-desktop kernel: [ 12.580091] bttv0: Bt878 (rev 17) at 0000:02:06.0, irq: 20, latency: 32, mmio: 0xfdeff000
May 4 20:10:17 vsn-desktop kernel: [ 12.580126] bttv0: detected: Pinnacle PCTV Sat [card=94], PCI subsystem ID is 11bd:001c
May 4 20:10:17 vsn-desktop kernel: [ 12.580129] bttv0: using: Pinnacle PCTV Sat [card=94,
May 4 20:10:17 vsn-desktop kernel: [ 12.580131] IRQ 20/bttv0: IRQF_DISABLED is not guaranteed on shared IRQs
May 4 20:10:17 vsn-desktop kernel: [ 12.580177] bttv0: gpio: en=00000000, out=00000000 in=009f00fc [init]
May 4 20:10:17 vsn-desktop kernel: [ 12.580284] bttv0: tuner absent
May 4 20:10:17 vsn-desktop kernel: [ 12.580403] bttv0: registered device video0
May 4 20:10:17 vsn-desktop kernel: [ 12.580492] bttv0: registered device vbi0
May 4 20:10:17 vsn-desktop kernel: [ 12.580522] bttv0: PLL: 28636363 => 35468950 .. ok
May 4 20:10:17 vsn-desktop kernel: [ 12.612607] bttv0: add subdevice "dvb0"
May 4 20:10:17 vsn-desktop kernel: [ 12.636856] type=1505 audit(127299661
May 4 20:10:17 vsn-desktop kernel: [ 12.637126] type=1505 audit(127299661
May 4 20:10:17 vsn-desktop kernel: [ 12.637267] type=1505 audit(127299661
May 4 20:10:17 vsn-desktop kernel: [ 12.641228] type=1505 audit(127299661
May 4 20:10:17 vsn-desktop kernel: [ 12.699157] alloc irq_desc for 21 on node -1
May 4 20:10:17 vsn-desktop kernel: [ 12.699161] alloc kstat_irqs on node -1
May 4 20:10:17 vsn-desktop kernel: [ 12.699172] CA0106 0000:02:07.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
May 4 20:10:17 vsn-desktop kernel: [ 12.699205] snd-ca0106: Model 1002 Rev 00000000 Serial 10021102
May 4 20:10:17 vsn-desktop kernel: [ 12.707800] bt878: AUDIO driver version 0.0.0 loaded
May 4 20:10:17 vsn-desktop kernel: [ 12.711087] bt878: Bt878 AUDIO function found (0).
May 4 20:10:17 vsn-desktop kernel: [ 12.711104] bt878 0000:02:06.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
May 4 20:10:17 vsn-desktop kernel: [ 12.711107] bt878_probe: card id=[0x1c11bd],[ Pinnacle PCTV Sat ] has DVB functions.
May 4 20:10:17 vsn-desktop kernel: [ 12.711115] bt878(0): Bt878 (rev 17) at 02:06.1, irq: 20, latency: 32, memory: 0xfdefe000
May 4 20:10:17 vsn-desktop kernel: [ 12.711139] IRQ 20/bt878: IRQF_DISABLED is not guaranteed on shared IRQs
May 4 20:10:17 vsn-desktop kernel: [ 12.737195] DVB: registering new adapter (bttv0)
May 4 20:10:17 vsn-desktop kernel: [ 12.757140] DVB: registering adapter 1 frontend 0 (Conexant CX24110 DVB-S)...
May 4 20:10:17 vsn-desktop kernel: [ 12.800653] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
May 4 20:10:17 vsn-desktop kernel: [ 12.800664] nvidia 0000:01:00.0: setting latency timer to 64
May 4 20:10:17 vsn-desktop kernel: [ 12.800668] vgaarb: device changed decodes: PCI:0000:
May 4 20:10:17 vsn-desktop kernel: [ 12.800994] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.15 Thu Mar 11 21:41:46 PST 2010
May 4 20:10:17 vsn-desktop kernel: [ 12.807436] Writing to ADC failed!
May 4 20:10:17 vsn-desktop kernel: [ 12.810597] Writing to ADC failed!
May 4 20:10:17 vsn-desktop kernel: [ 12.813732] DVB: registering adapter 0 frontend 0 (DiBcom 7000PC)...
May 4 20:10:17 vsn-desktop kernel: [ 13.022888] DiB0070: successfully identified
May 4 20:10:17 vsn-desktop kernel: [ 13.022985] input: IR-receiver inside an USB DVB receiver as /devices/
May 4 20:10:17 vsn-desktop kernel: [ 13.023051] dvb-usb: schedule remote query interval to 50 msecs.
May 4 20:10:17 vsn-desktop kernel: [ 13.023055] dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and connected.
May 4 20:10:17 vsn-desktop kernel: [ 13.023285] usbcore: registered new interface driver dvb_usb_dib0700
May 4 20:10:17 vsn-desktop kernel: [ 14.670602] EXT4-fs (sda7): mounted filesystem with ordered data mode
May 4 20:10:17 vsn-desktop kernel: [ 14.966966] r8169: eth0: link up
May 4 20:10:58 vsn-desktop kernel: [ 54.835205] ehci_hcd 0000:00:13.5: force halt; handhake f8044024 00004000 00000000 -> -110
May 4 20:10:58 vsn-desktop kernel: [ 54.836017] DiB0070 I2C read failed
May 4 20:10:58 vsn-desktop kernel: [ 54.840013] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.848014] DiB0070 I2C read failed
May 4 20:10:58 vsn-desktop kernel: [ 54.852016] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.860019] DiB0070 I2C read failed
May 4 20:10:58 vsn-desktop kernel: [ 54.864020] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.864023] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.868013] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.868016] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.868019] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.868022] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.868025] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.868028] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.868030] DiB0070 I2C write failed
May 4 20:10:58 vsn-desktop kernel: [ 54.876013] DiB0070 I2C read failed
May 4 20:10:58 vsn-desktop kernel: [ 54.876016] DiB0070 I2C write failed
And here the stick works well
May 4 19:26:12 vsn-desktop kernel: [ 12.712850] dib0700: loaded with support for 13 different device-types
May 4 19:26:12 vsn-desktop kernel: [ 12.713784] dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in cold state, will try to load a firmware
May 4 19:26:12 vsn-desktop kernel: [ 12.713790] usb 1-10: firmware: requesting dvb-usb-
May 4 19:26:12 vsn-desktop kernel: [ 12.724652] bt878: AUDIO driver version 0.0.0 loaded
May 4 19:26:12 vsn-desktop kernel: [ 12.724678] bt878: Bt878 AUDIO function found (0).
May 4 19:26:12 vsn-desktop kernel: [ 12.724695] bt878 0000:02:06.1: PCI INT A -> GSI 20 (level, low) -> IRQ 20
May 4 19:26:12 vsn-desktop kernel: [ 12.724698] bt878_probe: card id=[0x1c11bd],[ Pinnacle PCTV Sat ] has DVB functions.
May 4 19:26:12 vsn-desktop kernel: [ 12.724705] bt878(0): Bt878 (rev 17) at 02:06.1, irq: 20, latency: 32, memory: 0xfdefe000
May 4 19:26:12 vsn-desktop kernel: [ 12.724719] IRQ 20/bt878: IRQF_DISABLED is not guaranteed on shared IRQs
May 4 19:26:12 vsn-desktop kernel: [ 12.731409] DVB: registering new adapter (bttv0)
May 4 19:26:12 vsn-desktop kernel: [ 12.734069] gameport: EMU10K1 is pci0000:
May 4 19:26:12 vsn-desktop kernel: [ 12.742053] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
May 4 19:26:12 vsn-desktop kernel: [ 12.742061] nvidia 0000:01:00.0: setting latency timer to 64
May 4 19:26:12 vsn-desktop kernel: [ 12.742065] vgaarb: device changed decodes: PCI:0000:
May 4 19:26:12 vsn-desktop kernel: [ 12.742653] NVRM: loading NVIDIA UNIX x86 Kernel Module 195.36.15 Thu Mar 11 21:41:46 PST 2010
May 4 19:26:12 vsn-desktop kernel: [ 12.744774] DVB: registering adapter 0 frontend 0 (Conexant CX24110 DVB-S)...
May 4 19:26:12 vsn-desktop kernel: [ 12.758074] Writing to ADC failed!
May 4 19:26:12 vsn-desktop kernel: [ 12.761039] Writing to ADC failed!
May 4 19:26:12 vsn-desktop kernel: [ 12.792251] Console: switching to colour frame buffer device 80x30
May 4 19:26:12 vsn-desktop kernel: [ 13.018655] EXT4-fs (sda7): mounted filesystem with ordered data mode
May 4 19:26:12 vsn-desktop kernel: [ 13.097174] dvb-usb: downloading firmware from file 'dvb-usb-
May 4 19:26:12 vsn-desktop kernel: [ 13.302139] dib0700: firmware started successfully.
May 4 19:26:12 vsn-desktop kernel: [ 13.805029] dvb-usb: found a 'Terratec Cinergy T USB XXS (HD)/ T3' in warm state.
May 4 19:26:12 vsn-desktop kernel: [ 13.805084] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
May 4 19:26:12 vsn-desktop kernel: [ 13.805360] DVB: registering new adapter (Terratec Cinergy T USB XXS (HD)/ T3)
May 4 19:26:12 vsn-desktop kernel: [ 13.914750] type=1505 audit(127299397
May 4 19:26:12 vsn-desktop kernel: [ 13.915405] r8169: eth0: link up
May 4 19:26:12 vsn-desktop kernel: [ 13.916381] type=1505 audit(127299397
May 4 19:26:12 vsn-desktop kernel: [ 13.916643] type=1505 audit(127299397
May 4 19:26:12 vsn-desktop kernel: [ 13.916832] type=1505 audit(127299397
May 4 19:26:12 vsn-desktop kernel: [ 13.920649] type=1505 audit(127299397
May 4 19:26:12 vsn-desktop kernel: [ 13.924124] type=1505 audit(127299397
May 4 19:26:12 vsn-desktop kernel: [ 14.017406] DVB: registering adapter 1 frontend 0 (DiBcom 7000PC)...
May 4 19:26:13 vsn-desktop kernel: [ 14.240537] DiB0070: successfully identified
May 4 19:26:13 vsn-desktop kernel: [ 14.240630] input: IR-receiver inside an USB DVB receiver as /devices/
May 4 19:26:13 vsn-desktop kernel: [ 14.240689] dvb-usb: schedule remote query interval to 50 msecs.
May 4 19:26:13 vsn-desktop kernel: [ 14.240693] dvb-usb: Terratec Cinergy T USB XXS (HD)/ T3 successfully initialized and connected.
May 4 19:26:13 vsn-desktop kernel: [ 14.241297] usbcore: registered new interface driver dvb_usb_dib0700
In the second case the stick was found in cold state, the firmware loaded and ONLY THEN the device was found in warm state.
In the second it was found immediately in warm state. So the firmware isn't loaded, what somehow leads to my usb hub not working anymore. Then I have to reboot my PC in order to get it working again.
Regards
ProblemType: Bug
DistroRelease: Ubuntu 10.04
Package: linux-image-
Regression: Yes
Reproducible: Yes
ProcVersionSign
Uname: Linux 2.6.32-22-generic i686
NonfreeKernelMo
AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/
CRDA: Error: [Errno 2] Нет такого файла или каталога
Card0.Amixer.info:
Card hw:0 'CA0106'/'AudigyLS [SB0310] at 0xdf00 irq 21'
Mixer name : 'CA0106'
Components : 'AC97a:83847609'
Controls : 35
Simple ctrls : 19
Date: Sat May 8 12:10:20 2010
HibernationDevice: RESUME=
InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429)
IwConfig:
lo no wireless extensions.
eth0 no wireless extensions.
MachineType: Gigabyte Technology Co., Ltd. GA-MA69G-S3H
ProcCmdLine: BOOT_IMAGE=
ProcEnviron:
LANGUAGE=de:ru:en
PATH=(custom, no user)
LANG=de_DE.utf8
SHELL=/bin/bash
RelatedPackageV
RfKill:
SourcePackage: linux
dmi.bios.date: 07/27/2007
dmi.bios.vendor: Award Software International, Inc.
dmi.bios.version: F3
dmi.board.name: GA-MA69G-S3H
dmi.board.vendor: Gigabyte Technology Co., Ltd.
dmi.chassis.type: 3
dmi.chassis.vendor: Gigabyte Technology Co., Ltd.
dmi.modalias: dmi:bvnAwardSof
dmi.product.name: GA-MA69G-S3H
dmi.sys.vendor: Gigabyte Technology Co., Ltd.
Hi VSN,
If you could also please test the latest upstream kernel available that would be great. It will allow additional upstream developers to examine the issue. Refer to https:/ /wiki.ubuntu. com/KernelMainl ineBuilds . Once you've tested the upstream kernel, please remove the 'needs- upstream- testing' tag. This can be done by clicking on the yellow pencil icon next to the tag located at the bottom of the bug description and deleting the 'needs- upstream- testing' text. Please let us know your results.
Thanks in advance.
[This is an automated message. Apologies if it has reached you inappropriately; please just reply to this message indicating so.]