Comment 22 for bug 454747

Revision history for this message
Jack Nihil (jnihil) wrote :

This isn't an isolated issue with Ubuntu 9.10. I just tested using a Fedora 12 Live CD, transferring 3x 8GB files simultaneously to a Windows XP share and after about 15 minutes, the same problem occurred.

The kernel for Fedora 12 is 2.6.31.5-127.fc12.i686.

So the good news is that this isn't happening just on Ubuntu. Below is the familiar stack trace from the failure on Fedora 12, running on the same Shuttle SK22V10.

Do we need to take this up with kernel.org?

------------[ cut here ]------------
WARNING: at net/sched/sch_generic.c:246 dev_watchdog+0xc6/0x12d() (Not tainted)
Hardware name: SK22V10
NETDEV WATCHDOG: eth0 (via-rhine): transmit queue 0 timed out
Modules linked in: fuse ip6t_REJECT nf_conntrack_ipv6 ip6table_filter ip6_tables ipv6 cpufreq_ondemand powernow_k8 dm_multipath uinput snd_via82xx gameport snd_ac97_codec ac97_bus snd_seq snd_pcm snd_timer snd_page_alloc snd_mpu401_uart snd_rawmidi snd_seq_device firewire_ohci snd i2c_viapro firewire_core via_rhine mii k8temp soundcore crc_itu_t squashfs nls_utf8 ata_generic pata_acpi sata_via pata_via nouveau ttm drm_kms_helper drm i2c_algo_bit i2c_core [last unloaded: scsi_wait_scan]
Pid: 0, comm: swapper Not tainted 2.6.31.5-127.fc12.i686 #1
Call Trace:
 [<c0436d93>] warn_slowpath_common+0x70/0x87
 [<c06ee200>] ? dev_watchdog+0xc6/0x12d
 [<c0436de8>] warn_slowpath_fmt+0x29/0x2c
 [<c06ee200>] dev_watchdog+0xc6/0x12d
 [<c043fffc>] ? __mod_timer+0xd4/0xde
 [<c044004d>] ? mod_timer+0x20/0x27
 [<c06e554f>] ? neigh_periodic_timer+0x128/0x139
 [<c06ee13a>] ? dev_watchdog+0x0/0x12d
 [<c043fd21>] run_timer_softirq+0x14e/0x1af
 [<c043c042>] __do_softirq+0xb1/0x157
 [<c043c11e>] do_softirq+0x36/0x41
 [<c043c210>] irq_exit+0x2e/0x61
 [<c04173ab>] smp_apic_timer_interrupt+0x6d/0x7b
 [<c0403f95>] apic_timer_interrupt+0x31/0x38
 [<c041eba4>] ? native_safe_halt+0xa/0xc
 [<c0409596>] default_idle+0x45/0x6d
 [<c040969f>] c1e_idle+0xe1/0xe6
 [<c04026ff>] cpu_idle+0x96/0xaf
 [<c0753f98>] rest_init+0x58/0x5a
 [<c09898b2>] start_kernel+0x32b/0x330
 [<c0989070>] i386_start_kernel+0x70/0x77
---[ end trace a4e9777c5486a919 ]---
eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
via-rhine: Reset not complete yet. Trying harder.
eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1
eth0: Transmit timed out, status 0003, PHY status 786d, resetting...
eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1