Ubuntu
linux package

  1. Bug #316405
  2. Comment #0

Comment 0 for bug 316405

Revision history for this message
syldeb35 (sylvain-debray) wrote : Kernel OOPS during initialization SAA7134

Binary package hint: linux-image-2.6.28-4-generic

while booting kernel 2.6.28-4 oops during initialization of saa7134 module.
I need to include saa7134 in blacklist to boot.

here is the trace (during a modprobe after booting):
[77864.324665] saa7130/34: v4l2 driver version 0.2.14 loaded
[77864.324758] saa7134 0000:09:04.0: enabling device (0000 -> 0002)
[77864.324772] saa7134 0000:09:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[77864.324783] saa7133[0]: found at 0000:09:04.0, rev: 209, irq: 16, latency: 0, mmio: 0xd2005000
[77864.324795] saa7134 0000:09:04.0: setting latency timer to 64
[77864.324803] saa7133[0]: subsystem: 1461:a836, board: Avermedia M115 [card=138,autodetected]
[77864.325432] saa7133[0]: board init: gpio is a400000
[77864.512103] saa7133[0]: i2c eeprom 00: 61 14 36 a8 00 00 00 00 00 00 00 00 00 00 00 00
[77864.512126] saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
[77864.512148] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 c0 ff ff ff ff
[77864.512169] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512190] saa7133[0]: i2c eeprom 40: ff 65 00 ff c2 1e ff ff ff ff ff ff ff ff ff ff
[77864.512211] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512231] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512252] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512273] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512294] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512315] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512336] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512357] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512377] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512398] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.512419] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[77864.562568] tuner' 3-0061: chip found @ 0xc2 (saa7133[0])
[77864.634127] xc2028 3-0061: creating new instance
[77864.634134] xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner
[77864.634161] BUG: unable to handle kernel paging request at fffffff4
[77864.634170] IP: [<f81ae2c0>] saa7134_board_init2+0x140/0x710 [saa7134]
[77864.634192] *pde = 00791067 *pte = 00000000
[77864.634200] Oops: 0000 [#1] SMP
[77864.634206] last sysfs file: /sys/devices/virtual/net/pan0/statistics/collisions
[77864.634213] Dumping ftrace buffer:
[77864.634218] (ftrace buffer empty)
[77864.634221] Modules linked in: tuner_xc2028 tuner saa7134(+) ir_common compat_ioctl32 v4l2_common videobuf_dma_sg videobuf_core tveeprom binfmt_misc bridge stp bnep vboxnetflt vboxdrv acpi_cpufreq sbp2 lp joydev pcmcia ppdev acer_wmi pcspkr psmouse serio_raw arc4 ecb iTCO_wdt iTCO_vendor_support tifm_7xx1 yenta_socket sdhci_pci sdhci tifm_core rsrc_nonstatic pcmcia_core usbhid gspca_vc032x gspca_main videodev iwl3945 iwlcore v4l1_compat lbm_cw_mac80211 lirc_mceusb2 lirc_dev lbm_cw_cfg80211 led_class btusb parport_pc parport nvidia(P) video snd_hda_intel output snd_pcm snd_seq snd_timer snd_seq_device intel_agp snd soundcore agpgart snd_page_alloc ohci1394 ieee1394 ehci_hcd uhci_hcd sky2 fbcon tileblit font bitblit softcursor fuse
[77864.634345]
[77864.634351] Pid: 6868, comm: modprobe Tainted: P (2.6.28-4-generic #9-Ubuntu) Aspire 9800
[77864.634357] EIP: 0060:[<f81ae2c0>] EFLAGS: 00010286 CPU: 1
[77864.634373] EIP is at saa7134_board_init2+0x140/0x710 [saa7134]
[77864.634378] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000000
[77864.634382] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: f384fc58
[77864.634387] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
[77864.634392] Process modprobe (pid: 6868, ti=f384e000 task=f38aa5b0 task.ti=f384e000)
[77864.634397] Stack:
[77864.634400] 00000303 f384fc5c f384fc5c f3b26000 f6ffa400 f3b26000 f384fcd4 c0144be7
[77864.634413] 000000d0 f81b0889 656e7574 00000072 000000f0 f3b264b0 00000003 f3b26140
[77864.634428] f81ba4d0 f3b264b0 f384fcd4 f81b094d 65626f72 6e696d00 00006c61 00001ad4
[77864.634443] Call Trace:
[77864.634446] [<c0144be7>] ? request_module+0x97/0xf0
[77864.634458] [<f81b0889>] ? saa7134_i2c_eeprom+0xe9/0x110 [saa7134]
[77864.634487] [<f81b094d>] ? saa7134_i2c_register+0x9d/0x120 [saa7134]
[77864.634506] [<f81b963c>] ? saa7134_initdev+0x3cc/0x8d5 [saa7134]
[77864.634538] [<c02caa6e>] ? pci_device_probe+0x5e/0x80
[77864.634550] [<c033d8f4>] ? really_probe+0x54/0x180
[77864.634557] [<c02ca29e>] ? pci_match_device+0xbe/0xd0
[77864.634572] [<c033da5e>] ? driver_probe_device+0x3e/0x50
[77864.634581] [<c033daf9>] ? __driver_attach+0x89/0x90
[77864.634590] [<c033d233>] ? bus_for_each_dev+0x53/0x80
[77864.634597] [<c02ca9b0>] ? pci_device_remove+0x0/0x40
[77864.634607] [<c033d7b9>] ? driver_attach+0x19/0x20
[77864.634614] [<c033da70>] ? __driver_attach+0x0/0x90
[77864.634620] [<c033cc0f>] ? bus_add_driver+0x1af/0x230
[77864.634629] [<c02ca9b0>] ? pci_device_remove+0x0/0x40
[77864.634636] [<c033dc99>] ? driver_register+0x69/0x140
[77864.634647] [<f81b0240>] ? saa7134_init+0x0/0x60 [saa7134]
[77864.634672] [<c02cacca>] ? __pci_register_driver+0x4a/0x90
[77864.634680] [<f81b0240>] ? saa7134_init+0x0/0x60 [saa7134]
[77864.634697] [<f81b0292>] ? saa7134_init+0x52/0x60 [saa7134]
[77864.634723] [<c010111e>] ? _stext+0x2e/0x170
[77864.634730] [<c02052c5>] ? sysfs_addrm_finish+0x15/0xf0
[77864.634737] [<c0204a93>] ? sysfs_add_one+0x13/0x50
[77864.634743] [<c0204b0f>] ? sysfs_addrm_start+0x3f/0xa0
[77864.634750] [<c01a26cc>] ? __vunmap+0x9c/0xe0
[77864.634758] [<c01a26cc>] ? __vunmap+0x9c/0xe0
[77864.634764] [<c01a26cc>] ? __vunmap+0x9c/0xe0
[77864.634780] [<c01a2761>] ? vfree+0x21/0x30
[77864.634786] [<c015dbba>] ? load_module+0x103a/0x1040
[77864.634796] [<c019d3e9>] ? __vma_link_file+0x49/0x80
[77864.634819] [<c015dc48>] ? sys_init_module+0x88/0x1b0
[77864.634826] [<c0103f6b>] ? sysenter_do_call+0x12/0x2f
[77864.634833] Code: d0 20 33 c8 8b 55 90 8b 82 2c 01 00 00 89 5c 24 04 c7 04 24 f8 b3 1b f8 89 44 24 08 e8 b3 20 33 c8 66 90 8b 45 90 e8 40 fd ff ff <8b> 5d f4 31 c0 8b 75 f8 8b 7d fc 89 ec 5d c3 90 8b 4d 90 8b 71
[77864.634915] EIP: [<f81ae2c0>] saa7134_board_init2+0x140/0x710 [saa7134] SS:ESP 0068:f384fc58
[77864.634938] ---[ end trace 230b8e0d78143c97 ]---

lsb_release -rd
Description: Ubuntu jaunty (development branch)
Release: 9.04

lshw
 *-multimedia UNCLAIMED
                description: Multimedia controller
                product: SAA7131/SAA7133/SAA7135 Video Broadcast Decoder
                vendor: Philips Semiconductors
                physical id: 4
                bus info: pci@0000:09:04.0
                version: d1
                width: 32 bits
                clock: 33MHz
                capabilities: pm cap_list
                configuration: latency=0

from http://en.gentoo-wiki.com/wiki/AverMedia_AverTV_Cardbus_Hybrid_E506R :
"There are known problems with 2.6.26 (DVB-T initialization fails) and 2.6.28 (OOPS during initialization) kernels that causes the card initialization to fail."
"2.6.28, you need to apply corresponding patch first: "

File: avermedia-e506r-2.6.28.patch

--- a/linux/drivers/media/video/saa7134/saa7134-cards.c Mon Oct 13 09:37:06 2008 -0200
+++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Nov 14 01:03:00 2008 +0000
@@ -6151,7 +6151,7 @@
   struct v4l2_priv_tun_config xc2028_cfg;
   struct xc2028_ctrl ctl;

- memset(&xc2028_cfg, 0, sizeof(ctl));
+ memset(&xc2028_cfg, 0, sizeof(xc2028_cfg));
   memset(&ctl, 0, sizeof(ctl));

   ctl.fname = XC2028_DEFAULT_FIRMWARE;

(don't know if this can help...)