Not sure if it's of interest, but I couldn't help but notice my drive is same make, slightly different model:
/dev/scd0:
ATAPI CD-ROM, with removable media Model Number: TSSTcorpCD/DVDW TS-L532U Serial Number: 0010100177 Firmware Revision: AS04 Standards: Used: ATAPI for CD-ROMs, SFF-8020i, r2.5 Supported: CD-ROM ATAPI-2 Configuration: DRQ response: 50us. Packet size: 12 bytes Capabilities: LBA, IORDY(can be disabled) Buffer size: 2048.0kB DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * Power Management feature set * PACKET command feature set * DEVICE_RESET command * NOP cmd * Mandatory FLUSH_CACHE HW reset results: CBLID- above Vih Device num = 0 determined by CSEL
Not sure if it's of interest, but I couldn't help but notice my drive is same make, slightly different model:
/dev/scd0:
ATAPI CD-ROM, with removable media
Model Number: TSSTcorpCD/DVDW TS-L532U
Serial Number: 0010100177
Firmware Revision: AS04
Standards:
Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
Supported: CD-ROM ATAPI-2
Configuration:
DRQ response: 50us.
Packet size: 12 bytes
Capabilities:
LBA, IORDY(can be disabled)
Buffer size: 2048.0kB
DMA: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2 udma0 udma1 *udma2
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* Power Management feature set
* PACKET command feature set
* DEVICE_RESET command
* NOP cmd
* Mandatory FLUSH_CACHE
HW reset results:
CBLID- above Vih
Device num = 0 determined by CSEL