Comment 15 for bug 2068804

But it's weird, because Windows is running fine.

Now i am checking the logs, and after a bit research those errors are only resulted from an unsupported vendor specific log pages.

/home/ee# smartctl --all /dev/nvme0n1
smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.8.0-35-lowlatency] (local build)
Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number: KINGSTON SKC3000S1024G
Serial Number: 50026B7686280109
Firmware Version: EIFK31.6
PCI Vendor/Subsystem ID: 0x2646
IEEE OUI Identifier: 0x0026b7
Total NVM Capacity: 1.024.209.543.168 [1,02 TB]
Unallocated NVM Capacity: 0
Controller ID: 1
NVMe Version: 1.4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 1.024.209.543.168 [1,02 TB]
Namespace 1 Formatted LBA Size: 512
Namespace 1 IEEE EUI-64: 0026b7 6862801095
Local Time is: Thu Jun 13 09:24:30 2024 CEST
Firmware Updates (0x12): 1 Slot, no Reset required
Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test
Optional NVM Commands (0x005d): Comp DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp
Log Page Attributes (0x08): Telmtry_Lg
Maximum Data Transfer Size: 512 Pages
Warning Comp. Temp. Threshold: 84 Celsius
Critical Comp. Temp. Threshold: 89 Celsius

Supported Power States
St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat
 0 + 8.80W - - 0 0 0 0 0 0
 1 + 7.10W - - 1 1 1 1 0 0
 2 + 5.20W - - 2 2 2 2 0 0
 3 - 0.0620W - - 3 3 3 3 2500 7500
 4 - 0.0620W - - 4 4 4 4 2500 7500

Supported LBA Sizes (NSID 0x1)
Id Fmt Data Metadt Rel_Perf
 0 + 512 0 2
 1 - 4096 0 1

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02)
Critical Warning: 0x00
Temperature: 27 Celsius
Available Spare: 100%
Available Spare Threshold: 10%
Percentage Used: 1%
Data Units Read: 11.592.273 [5,93 TB]
Data Units Written: 16.127.139 [8,25 TB]
Host Read Commands: 145.543.073
Host Write Commands: 185.983.811
Controller Busy Time: 1.022
Power Cycles: 926
Power On Hours: 2.175
Unsafe Shutdowns: 119
Media and Data Integrity Errors: 0
Error Information Log Entries: 4.286
Warning Comp. Temperature Time: 0
Critical Comp. Temperature Time: 0
Temperature Sensor 2: 48 Celsius

Error Information (NVMe Log 0x01, 16 of 63 entries)
Num ErrCount SQId CmdId Status PELoc LBA NSID VS Message
  0 4286 0 0x0012 0x4004 0x028 0 0 - Invalid Field in Command
  1 4285 0 0x000d 0x4004 - 0 0 - Invalid Field in Command

Read Self-test Log failed: Invalid Field in Command (0x2002)