Hi,
I integrated locally this patches:
# tsn 0001-taprio-Add-support-for-frame-preemption-offload.tsn 0002-mqprio-Add-support-for-frame-preemption-offload.tsn 0003-taprio-Replace-tc_map_to_queue_mask.tsn 0004-core-Introduce-netdev_tc_map_to_queue_mask.tsn 0005-net-pcs-xpcs-enable-xpcs-reset-skipping.tsn 0006-net-stmmac-Bugfix-on-stmmac_interrupt-for-WOL.tsn 0007-net-stmmac-add-FPE-preempt-setting-for-TxQ-preemptible.tsn 0008-net-stmmac-support-recalculating-of-CBS-idle-slope-und.tsn 0009-net-stmmac-Add-module-param-to-del-keep-est-hw-conf.tsn 0010-net-phy-increase-gpy-loopback-test-delay.tsn 0011-net-stmmac-Resolve-poor-line-rate-after-switching-from.tsn 0012-net-phy-dp83867-perform-restart-AN-after-modifying-AN-.tsn 0013-stmmac-intel-Separate-ADL-N-and-RPL-P-device-ID-from-T.tsn 0014-net-stmmac-Adjust-mac_capabilities-for-Intel-mGbE-2.5G.tsn 0015-stmmac-intel-skip-xpcs-reset-for-2.5Gbps-on-Intel-Alde.tsn 0016-net-stmmac-add-check-for-2.5G-mode-to-prevent-MAC-capa.tsn 0017-stmmac-intel-Enable-PHY-WoL-in-ADL-N.tsn 0018-net-phy-reconfigure-PHY-WoL-when-WoL-option-is-enabled.tsn 0019-net-stmmac-fix-MAC-and-phylink-mismatch-issue-after-re.tsn 0020-xsk-add-txtime-field-in-xdp_desc-struct.tsn 0021-net-stmmac-restructure-Rx-Tx-hardware-timestamping-fun.tsn 0022-net-stmmac-Add-per-packet-time-based-scheduling-for-XD.tsn 0023-net-stmmac-introduce-AF_XDP-ZC-RX-HW-timestamps.tsn 0024-net-stmmac-add-fsleep-in-HW-Rx-timestamp-checking-loop.tsn 0025-net-stmmac-provide-allow_switch_interface-flag.tsn 0026-net-stmmac-select-PCS-negotiation-mode-according-to-th.tsn 0027-net-pcs-xpcs-re-initiate-clause-37-Auto-negotiation.tsn 0028-arch-x86-Add-IPC-mailbox-accessor-function-and-add-SoC.tsn 0029-net-stmmac-configure-SerDes-according-to-the-interface.tsn 0030-stmmac-intel-interface-switching-support-for-intel-pla.tsn 0031-net-stmmac-Set-mac_managed_pm-flag-from-stmmac-to-reso.tsn 0032-net-phylink-Add-module_exit.tsn
And now 1Gbps is working.
Link for series file (multiple patches): https://github.com/intel/linux-intel-quilt/blob/mainline-tracking/linux/v6.9-rc3/patches/series
Port is available now and ip address exist on first interface.
Hi,
I integrated locally this patches:
# tsn Add-support- for-frame- preemption- offload. tsn Add-support- for-frame- preemption- offload. tsn Replace- tc_map_ to_queue_ mask.tsn Introduce- netdev_ tc_map_ to_queue_ mask.tsn pcs-xpcs- enable- xpcs-reset- skipping. tsn stmmac- Bugfix- on-stmmac_ interrupt- for-WOL. tsn stmmac- add-FPE- preempt- setting- for-TxQ- preemptible. tsn stmmac- support- recalculating- of-CBS- idle-slope- und.tsn stmmac- Add-module- param-to- del-keep- est-hw- conf.tsn phy-increase- gpy-loopback- test-delay. tsn stmmac- Resolve- poor-line- rate-after- switching- from.tsn phy-dp83867- perform- restart- AN-after- modifying- AN-.tsn intel-Separate- ADL-N-and- RPL-P-device- ID-from- T.tsn stmmac- Adjust- mac_capabilitie s-for-Intel- mGbE-2. 5G.tsn intel-skip- xpcs-reset- for-2.5Gbps- on-Intel- Alde.tsn stmmac- add-check- for-2.5G- mode-to- prevent- MAC-capa. tsn intel-Enable- PHY-WoL- in-ADL- N.tsn phy-reconfigure -PHY-WoL- when-WoL- option- is-enabled. tsn stmmac- fix-MAC- and-phylink- mismatch- issue-after- re.tsn add-txtime- field-in- xdp_desc- struct. tsn stmmac- restructure- Rx-Tx-hardware- timestamping- fun.tsn stmmac- Add-per- packet- time-based- scheduling- for-XD. tsn stmmac- introduce- AF_XDP- ZC-RX-HW- timestamps. tsn stmmac- add-fsleep- in-HW-Rx- timestamp- checking- loop.tsn stmmac- provide- allow_switch_ interface- flag.tsn stmmac- select- PCS-negotiation -mode-according -to-th. tsn pcs-xpcs- re-initiate- clause- 37-Auto- negotiation. tsn x86-Add- IPC-mailbox- accessor- function- and-add- SoC.tsn stmmac- configure- SerDes- according- to-the- interface. tsn intel-interface -switching- support- for-intel- pla.tsn stmmac- Set-mac_ managed_ pm-flag- from-stmmac- to-reso. tsn phylink- Add-module_ exit.tsn
0001-taprio-
0002-mqprio-
0003-taprio-
0004-core-
0005-net-
0006-net-
0007-net-
0008-net-
0009-net-
0010-net-
0011-net-
0012-net-
0013-stmmac-
0014-net-
0015-stmmac-
0016-net-
0017-stmmac-
0018-net-
0019-net-
0020-xsk-
0021-net-
0022-net-
0023-net-
0024-net-
0025-net-
0026-net-
0027-net-
0028-arch-
0029-net-
0030-stmmac-
0031-net-
0032-net-
And now 1Gbps is working.
Link for series file (multiple patches): /github. com/intel/ linux-intel- quilt/blob/ mainline- tracking/ linux/v6. 9-rc3/patches/ series
https:/
Port is available now and ip address exist on first interface.