| 2008-03-07 19:06:03 |
Christoph |
bug |
|
|
added attachment 'dmesg.log.odt' (dmesg.log.odt) |
| 2008-03-07 19:06:22 |
Christoph |
bug |
|
|
added attachment 'lspci-vvnn.log.odt' (lspci-vvnn.log.odt) |
| 2008-03-07 19:06:40 |
Christoph |
bug |
|
|
added attachment 'uname-a.log.odt' (uname-a.log.odt) |
| 2008-03-07 19:06:56 |
Christoph |
bug |
|
|
added attachment 'version.log.odt' (version.log.odt) |
| 2008-03-08 12:16:41 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU
onboard)
3.) The HDD is not recognized while installing Hardy, partition window is empty, can't make any changes.. > installation not possible
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under gutsy:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU
onboard)
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under gutsy:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
|
| 2008-03-08 12:17:24 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU
onboard)
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under gutsy:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU
onboard)
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under gutsy:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
|
| 2008-03-08 12:18:24 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU
onboard)
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under gutsy:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under gutsy:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
|
| 2008-03-08 12:20:25 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under gutsy:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under gutsy:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
|
| 2008-03-08 12:20:25 |
Christoph |
title |
Samsung T166 S-ATA2 HDD not recongnized on kernel 2.6.24-11 |
S-ATA2 HDD not recongnized on kernel 2.6.24-11 (Samsung T166 Spinpoint) |
|
| 2008-03-08 12:23:28 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under gutsy:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
|
| 2008-03-09 12:49:19 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
|
| 2008-03-09 21:24:00 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
-----------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case.
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
|
|
| 2008-03-11 00:07:28 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
----------------------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
-----------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case.
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
----------------------------
Booting:
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
--------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
----------------------------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case.
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
|
|
| 2008-03-12 16:01:18 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
----------------------------
Booting:
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
--------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
----------------------------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case.
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
----------------------------
Booting:
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
--------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
----------------------------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case.
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
---------------------------
A Samsung SH S203P Sata DVD Burner isn't working, too.. If this is from interest.
[4.........] ata2: softreset failed etc.
|
|
| 2008-03-12 16:01:18 |
Christoph |
title |
S-ATA2 HDD not recongnized on kernel 2.6.24-11 (Samsung T166 Spinpoint) |
S-ATA2 HDD not recongnized on kernel 2.6.24-11 (Samsung T166 Spinpoint)/ Nvidia Sata Controller not working |
|
| 2008-03-12 16:16:59 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
----------------------------
Booting:
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
--------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
----------------------------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case.
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
---------------------------
A Samsung SH S203P Sata DVD Burner isn't working, too.. If this is from interest.
[4.........] ata2: softreset failed etc.
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
----------------------------
Booting:
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
--------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
----------------------------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case.
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
---------------------------
A Samsung SH S203P Sata DVD Burner isn't working, too.. If this is of interest.
[4.........] ata2: softreset failed etc.
|
|
| 2008-03-14 19:49:35 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
----------------------------
Booting:
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
--------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
----------------------------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case.
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
---------------------------
A Samsung SH S203P Sata DVD Burner isn't working, too.. If this is of interest.
[4.........] ata2: softreset failed etc.
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard, nforce 780a Sata Controller)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
----------------------------
Booting:
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
--------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
----------------------------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case. (nforce 780a)
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
---------------------------
A Samsung SH S203P Sata DVD Burner isn't working, too.. If this is of interest.
[4.........] ata2: softreset failed etc.
|
|
| 2008-03-14 19:49:35 |
Christoph |
title |
S-ATA2 HDD not recongnized on kernel 2.6.24-11 (Samsung T166 Spinpoint)/ Nvidia Sata Controller not working |
S-ATA2 HDD not recongnized (Samsung T166 Spinpoint)/ Nvidia Sata Controller (nforce 780a) not working |
|
| 2008-03-14 23:09:37 |
Christoph |
description |
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard, nforce 780a Sata Controller)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
----------------------------
Booting:
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
--------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
----------------------------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case. (nforce 780a)
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
---------------------------
A Samsung SH S203P Sata DVD Burner isn't working, too.. If this is of interest.
[4.........] ata2: softreset failed etc.
|
1.) Ubuntu Hardy Heron, updated 7th of Feb. 2008
Installation from CD not possible (Desktop-, Alternate-i386 CDs)
2.) HDD: Samsung T166 Spinpoint 320GB, S-ATA2
Motherboard: Asus M3N78-EMH HDMI (with Geforce 8200 GPU onboard, nforce 780a)
CPU: AMD 64 X2 BE-2400
RAM: 4 GB DDR2-800 Mhz A-DATA
3.) The HDD is not recognized while installing Hardy from CD:
* partition window is empty, can't make any changes (Desktop CD)
* driver-list is prompting, you have to choose, which one could fit (Alternate CD)
4.) Problematic recognition with gutsy, too. After formating the hdd gutsy recognizes the hdd.
(...hardy not)
My HDDs partitions now:
1.NTFS 30GB
2.NTFS 50GB
3.ext3 25GB ← primary, root
4.ext3 ~210GB ← logical, \home
----------------------------
Booting:
If I choose the standard Hardy Heron Mode (kernel 2.6.24-11), it hangs up at the following point:
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: qc timeout (cmd0xec)
[ ... ] ata1.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ ... ] ata1.00: failed to recover some devices
..
...
....
sr 6:0:1:0 Attached scsi generic sg1 type5
Done.
Check root= bootarg cat /proc/cmdline
or missing modules, devices: cat /proc/modules ls/dev
ALERT! /dev/disk/by-unid/9ae09019-d95f-4cd3-bd46-16c7bfddf2dd does not exist
Dropping to a shell!
Debian BusyBox...
--------------
under hardy/gutsy with kernel 2.6.22-14 :
[ 4.276000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.288000] ata1.00: ATA-8: SAMSUNG HD321KJ, CP100-12, max UDMA7
----------------------------
After reading about S-ATA a little bit. Maybe it could be a problem of the S-ATA Controller on the Mainboard, which should be from Nvidia in my case. (nforce 780a)
I tried a Debian Installation and it, of course, didn't work, too. In the large list of possible drivers I choosed "Sata_nv" but, like I said, it didn't work.
So maybe I'm just too much of an idiot choosing the right sata-controller driver. Or.. the "driver modul" isn't implemented into the kernel, yet?!
---------------------------
A Samsung SH S203P Sata DVD Burner isn't working, too.. If this is of interest.
[4.........] ata2: softreset failed etc.
|
|
| 2008-03-15 13:23:09 |
thanatos |
linux: status |
New |
Confirmed |
|
| 2008-03-15 13:23:09 |
thanatos |
linux: assignee |
|
info-mynetworks |
|
| 2008-08-29 05:14:19 |
Leann Ogasawara |
bug |
|
|
added subscriber Leann Ogasawara |
| 2008-10-03 02:42:39 |
Leann Ogasawara |
linux: status |
Confirmed |
Fix Released |
|
| 2008-10-03 02:42:39 |
Leann Ogasawara |
linux: statusexplanation |
same problem, seems to be the mainboard -> nforce 780a chipset ! for more info read my comment |
|
|
