The screen after the grub is getting black ( backlight is still working ).
System is booting normally - after that backlight screen is working .. and black all the time.
I can control brightness by shortcuts.
If connect HDMI cable then on the new via HDMI the screen works perfect but on the device screen is still black unfortunately .
I attached the kernel.
- edid from windows 10
Monitor
Model name............... WLY-10102FHD
Windows description...... Generic PnP Monitor
Manufacturer............. AUO
Plug and Play ID......... AUO17D8
Serial number............ n/a
Manufacture date......... 2013, ISO week 11
Filter driver............ None
-------------------------
EDID revision............ 1.4
Input signal type........ Digital
Color bit depth.......... 8 bits per primary color
Color encoding formats... RGB 4:4:4, YCrCb 4:4:4
Screen size.............. 140 x 220 mm (10,3 in)
Power management......... Active off/sleep
Extension blocs.......... None
-------------------------
DDC/CI................... n/a
Color characteristics
Default color space...... sRGB
Display gamma............ 3,55
Red chromaticity......... Rx 0,625 - Ry 0,340
Green chromaticity....... Gx 0,285 - Gy 0,605
Blue chromaticity........ Bx 0,148 - By 0,063
White point (default).... Wx 0,281 - Wy 0,309
Additional descriptors... None
Created attachment 142557
kernel log
The screen after the grub is getting black ( backlight is still working ).
System is booting normally - after that backlight screen is working .. and black all the time.
I can control brightness by shortcuts.
If connect HDMI cable then on the new via HDMI the screen works perfect but on the device screen is still black unfortunately .
I attached the kernel.
- edid from windows 10
Monitor ....... ..... AUO ------- ------- ------ ....... .... 1.4 ------- ------- ------ ....... ....... .... n/a
Model name............... WLY-10102FHD
Windows description...... Generic PnP Monitor
Manufacturer.
Plug and Play ID......... AUO17D8
Serial number............ n/a
Manufacture date......... 2013, ISO week 11
Filter driver............ None
-----
EDID revision.
Input signal type........ Digital
Color bit depth.......... 8 bits per primary color
Color encoding formats... RGB 4:4:4, YCrCb 4:4:4
Screen size.............. 140 x 220 mm (10,3 in)
Power management......... Active off/sleep
Extension blocs.......... None
-----
DDC/CI.
Color characteristics ....... . Rx 0,625 - Ry 0,340 ....... Bx 0,148 - By 0,063
Default color space...... sRGB
Display gamma............ 3,55
Red chromaticity.
Green chromaticity....... Gx 0,285 - Gy 0,605
Blue chromaticity.
White point (default).... Wx 0,281 - Wy 0,309
Additional descriptors... None
Thanks for any help.