I also have this problem on an Intel DQ45CB mainboard with the onboard Intel 82567LM-3 Gigabit ethernet controller. The syslog fills up with following entries, while network connection is being reset. It does not happen immediately after boot, but high throughput seems to trigger it. I use the adapter in a bridge in a KVM server.
[105278.169850] e1000e 0000:00:19.0 enp0s25: Detected Hardware Unit Hang: TDH <4a> TDT <79> next_to_use <79> next_to_clean <49> buffer_info[next_to_clean]: time_stamp <1019073b8> next_to_watch <4a> jiffies <101907568> next_to_watch.status <0>
MAC Status <80083>
PHY Status <796d>
PHY 1000BASE-T Status <3800>
PHY Extended Status <3000>
PCI Status <10>
[105280.153549] e1000e 0000:00:19.0 enp0s25: Detected Hardware Unit Hang: TDH <4a> TDT <79> next_to_use <79> next_to_clean <49> buffer_info[next_to_clean]: time_stamp <1019073b8> next_to_watch <4a> jiffies <101907758> next_to_watch.status <0>
MAC Status <80083>
PHY Status <796d>
PHY 1000BASE-T Status <3800>
PHY Extended Status <3000>
PCI Status <10>
[105282.169795] e1000e 0000:00:19.0 enp0s25: Detected Hardware Unit Hang: TDH <4a> TDT <79> next_to_use <79> next_to_clean <49> buffer_info[next_to_clean]: time_stamp <1019073b8> next_to_watch <4a> jiffies <101907950> next_to_watch.status <0>
MAC Status <80083>
PHY Status <796d>
PHY 1000BASE-T Status <3800>
PHY Extended Status <3000>
PCI Status <10>
[105283.385343] e1000e 0000:00:19.0 enp0s25: Reset adapter unexpectedly
I also have this problem on an Intel DQ45CB mainboard with the onboard Intel 82567LM-3 Gigabit ethernet controller. The syslog fills up with following entries, while network connection is being reset. It does not happen immediately after boot, but high throughput seems to trigger it. I use the adapter in a bridge in a KVM server.
[105278.169850] e1000e 0000:00:19.0 enp0s25: Detected Hardware Unit Hang:
TDH <4a>
TDT <79>
next_ to_use <79>
next_ to_clean <49>
buffer_ info[next_ to_clean] :
time_ stamp <1019073b8>
next_ to_watch <4a>
jiffies <101907568>
next_ to_watch. status <0>
TDH <4a>
TDT <79>
next_ to_use <79>
next_ to_clean <49>
buffer_ info[next_ to_clean] :
time_ stamp <1019073b8>
next_ to_watch <4a>
jiffies <101907758>
next_ to_watch. status <0>
TDH <4a>
TDT <79>
next_ to_use <79>
next_ to_clean <49>
buffer_ info[next_ to_clean] :
time_ stamp <1019073b8>
next_ to_watch <4a>
jiffies <101907950>
next_ to_watch. status <0>
MAC Status <80083>
PHY Status <796d>
PHY 1000BASE-T Status <3800>
PHY Extended Status <3000>
PCI Status <10>
[105280.153549] e1000e 0000:00:19.0 enp0s25: Detected Hardware Unit Hang:
MAC Status <80083>
PHY Status <796d>
PHY 1000BASE-T Status <3800>
PHY Extended Status <3000>
PCI Status <10>
[105282.169795] e1000e 0000:00:19.0 enp0s25: Detected Hardware Unit Hang:
MAC Status <80083>
PHY Status <796d>
PHY 1000BASE-T Status <3800>
PHY Extended Status <3000>
PCI Status <10>
[105283.385343] e1000e 0000:00:19.0 enp0s25: Reset adapter unexpectedly