| 2016-06-02 17:39:23 |
Bougron |
bug |
|
|
added bug |
| 2016-06-02 18:00:08 |
Brad Figg |
linux (Ubuntu): status |
New |
Incomplete |
|
| 2016-06-03 22:41:43 |
Bougron |
tags |
|
apport-collected xenial |
|
| 2016-06-03 22:41:44 |
Bougron |
description |
New question #293348 on Ubuntu:
https://answers.launchpad.net/ubuntu/+question/293348
Bonjour. / Hello.
Je peux utiliser ma clé USB3 sur un port USB3 avec windows mais pas avec ubuntu 16.04 sauf à y mettre un prolongateur usb2.
I use my “USB3-key on a USB3 port with Windows but not with ubuntu 16.04 except to put a USB2 extender.
u1604btrfs@u1604btrfs:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04 LTS"
u1604btrfs@u1604btrfs:~$
La clé USB3 de 64 GO connectée directement à un port USB3 n’a aucun problème avec windows10 avec un débit moyen de 42 MB/s.
The USB3 64GB connected directly to a USB3 port was no problem with Windows 10 with an average throughput of 42 MB / s.
La clé USB3 de 64 GO connectée via un càble USB de prolongation (20 cm) à un port USB3 fonctionne avec un débit moyen de 26 MB/s avec ubuntu.
The USB3 64GB connected via an extension USB cable (20 cm) to a USB3 port works with an average throughput of 26 MB / s with ubuntu.
Un disque USB3 connecté à ce même port USB3 fonctionne avec un débit moyen de 106 MB/s avec ubuntu,
A USB3 drive connected to the same USB3 port works with an average throughput of 106 MB / s with ubuntu.
La clé USB3 de 64 GO connectée directement à un port USB3 ne se monte pas avec ubuntu, Je pense à un problème logiciel. Merci de votre avis.
The USB 3 64GB connected directly to a USB3 port does not go up with ubuntu. I think to a software problem, Thanks for your review,
Trace DMESG du branchement direct.
Trace DMESG direct connection.
[15027.934173] usb 3-1: USB disconnect, device number 3
[15113.908384] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[15113.949359] usb 4-1: New USB device found, idVendor=0951, idProduct=1666
[15113.949370] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15113.949377] usb 4-1: Product: DataTraveler 3.0
[15113.949387] usb 4-1: Manufacturer: Kingston
[15113.949395] usb 4-1: SerialNumber: 60A44C426697FE50C98100E8
[15118.948235] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.951961] usb 4-1: Disable of device-initiated U1 failed.
[15118.955466] usb 4-1: Disable of device-initiated U2 failed.
[15118.955474] usb-storage 4-1:1.0: USB Mass Storage device detected
[15118.955648] scsi host9: usb-storage 4-1:1.0
[15118.959180] usb 4-1: Set SEL for device-initiated U1 failed.
[15118.962661] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.962810] usb 4-1: USB disconnect, device number 3
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Trace DMESG du branchement avec un câble prolongateur.
Trace DMESG connecting with an extension cable.
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15930.041889] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[15930.248230] usb 3-1: New USB device found, idVendor=0951, idProduct=1666
[15930.248237] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15930.248241] usb 3-1: Product: DataTraveler 3.0
[15930.248244] usb 3-1: Manufacturer: Kingston
[15930.248246] usb 3-1: SerialNumber: 60A44C426697FE50C98100E8
[15930.248591] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.248610] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.249352] usb-storage 3-1:1.0: USB Mass Storage device detected
[15930.251542] scsi host10: usb-storage 3-1:1.0
[15932.447123] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 3.0 1.00 PQ: 0 ANSI: 6
[15932.447953] sd 10:0:0:0: Attached scsi generic sg2 type 0
[15932.449447] sd 10:0:0:0: [sdb] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
[15932.451694] sd 10:0:0:0: [sdb] Write Protect is off
[15932.451704] sd 10:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[15932.453308] sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[15932.470160] sdb: sdb1 sdb2 sdb3 sdb4
[15932.472853] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[15933.102257] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[15933.128433] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
u1604btrfs@u1604btrfs:~$ |
New question #293348 on Ubuntu:
https://answers.launchpad.net/ubuntu/+question/293348
Bonjour. / Hello.
Je peux utiliser ma clé USB3 sur un port USB3 avec windows mais pas avec ubuntu 16.04 sauf à y mettre un prolongateur usb2.
I use my “USB3-key on a USB3 port with Windows but not with ubuntu 16.04 except to put a USB2 extender.
u1604btrfs@u1604btrfs:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04 LTS"
u1604btrfs@u1604btrfs:~$
La clé USB3 de 64 GO connectée directement à un port USB3 n’a aucun problème avec windows10 avec un débit moyen de 42 MB/s.
The USB3 64GB connected directly to a USB3 port was no problem with Windows 10 with an average throughput of 42 MB / s.
La clé USB3 de 64 GO connectée via un càble USB de prolongation (20 cm) à un port USB3 fonctionne avec un débit moyen de 26 MB/s avec ubuntu.
The USB3 64GB connected via an extension USB cable (20 cm) to a USB3 port works with an average throughput of 26 MB / s with ubuntu.
Un disque USB3 connecté à ce même port USB3 fonctionne avec un débit moyen de 106 MB/s avec ubuntu,
A USB3 drive connected to the same USB3 port works with an average throughput of 106 MB / s with ubuntu.
La clé USB3 de 64 GO connectée directement à un port USB3 ne se monte pas avec ubuntu, Je pense à un problème logiciel. Merci de votre avis.
The USB 3 64GB connected directly to a USB3 port does not go up with ubuntu. I think to a software problem, Thanks for your review,
Trace DMESG du branchement direct.
Trace DMESG direct connection.
[15027.934173] usb 3-1: USB disconnect, device number 3
[15113.908384] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[15113.949359] usb 4-1: New USB device found, idVendor=0951, idProduct=1666
[15113.949370] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15113.949377] usb 4-1: Product: DataTraveler 3.0
[15113.949387] usb 4-1: Manufacturer: Kingston
[15113.949395] usb 4-1: SerialNumber: 60A44C426697FE50C98100E8
[15118.948235] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.951961] usb 4-1: Disable of device-initiated U1 failed.
[15118.955466] usb 4-1: Disable of device-initiated U2 failed.
[15118.955474] usb-storage 4-1:1.0: USB Mass Storage device detected
[15118.955648] scsi host9: usb-storage 4-1:1.0
[15118.959180] usb 4-1: Set SEL for device-initiated U1 failed.
[15118.962661] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.962810] usb 4-1: USB disconnect, device number 3
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Trace DMESG du branchement avec un câble prolongateur.
Trace DMESG connecting with an extension cable.
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15930.041889] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[15930.248230] usb 3-1: New USB device found, idVendor=0951, idProduct=1666
[15930.248237] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15930.248241] usb 3-1: Product: DataTraveler 3.0
[15930.248244] usb 3-1: Manufacturer: Kingston
[15930.248246] usb 3-1: SerialNumber: 60A44C426697FE50C98100E8
[15930.248591] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.248610] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.249352] usb-storage 3-1:1.0: USB Mass Storage device detected
[15930.251542] scsi host10: usb-storage 3-1:1.0
[15932.447123] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 3.0 1.00 PQ: 0 ANSI: 6
[15932.447953] sd 10:0:0:0: Attached scsi generic sg2 type 0
[15932.449447] sd 10:0:0:0: [sdb] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
[15932.451694] sd 10:0:0:0: [sdb] Write Protect is off
[15932.451704] sd 10:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[15932.453308] sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[15932.470160] sdb: sdb1 sdb2 sdb3 sdb4
[15932.472853] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[15933.102257] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[15933.128433] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
u1604btrfs@u1604btrfs:~$
---
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: u604 2383 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 16.04
MachineType: TOSHIBA SATELLITE S70t-A
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed root=UUID=17f90115-fe0b-440d-9708-7039508c3003 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
RelatedPackageVersions:
linux-restricted-modules-4.4.0-22-generic N/A
linux-backports-modules-4.4.0-22-generic N/A
linux-firmware 1.157
Tags: xenial
Uname: Linux 4.4.0-22-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/18/2014
dmi.bios.vendor: Insyde Corp.
dmi.bios.version: 1.30
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Type2 - Board Product Name1
dmi.board.vendor: Type2 - Board Vendor Name1
dmi.board.version: Type2 - Board Version
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: OEM Chassis Manufacturer
dmi.chassis.version: OEM Chassis Version
dmi.modalias: dmi:bvnInsydeCorp.:bvr1.30:bd04/18/2014:svnTOSHIBA:pnSATELLITES70t-A:pvrPSKN6E-01C00KFR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
dmi.product.name: SATELLITE S70t-A
dmi.product.version: PSKN6E-01C00KFR
dmi.sys.vendor: TOSHIBA |
|
| 2016-06-03 22:41:45 |
Bougron |
attachment added |
|
AlsaInfo.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676357/+files/AlsaInfo.txt |
|
| 2016-06-03 22:41:46 |
Bougron |
attachment added |
|
CRDA.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676358/+files/CRDA.txt |
|
| 2016-06-03 22:41:48 |
Bougron |
attachment added |
|
CurrentDmesg.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676359/+files/CurrentDmesg.txt |
|
| 2016-06-03 22:41:49 |
Bougron |
attachment added |
|
IwConfig.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676360/+files/IwConfig.txt |
|
| 2016-06-03 22:41:51 |
Bougron |
attachment added |
|
JournalErrors.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676361/+files/JournalErrors.txt |
|
| 2016-06-03 22:41:52 |
Bougron |
attachment added |
|
Lspci.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676362/+files/Lspci.txt |
|
| 2016-06-03 22:41:54 |
Bougron |
attachment added |
|
Lsusb.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676363/+files/Lsusb.txt |
|
| 2016-06-03 22:41:55 |
Bougron |
attachment added |
|
ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676364/+files/ProcCpuinfo.txt |
|
| 2016-06-03 22:41:56 |
Bougron |
attachment added |
|
ProcEnviron.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676365/+files/ProcEnviron.txt |
|
| 2016-06-03 22:41:58 |
Bougron |
attachment added |
|
ProcInterrupts.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676366/+files/ProcInterrupts.txt |
|
| 2016-06-03 22:41:59 |
Bougron |
attachment added |
|
ProcModules.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676367/+files/ProcModules.txt |
|
| 2016-06-03 22:42:00 |
Bougron |
attachment added |
|
PulseList.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676368/+files/PulseList.txt |
|
| 2016-06-03 22:42:01 |
Bougron |
attachment added |
|
RfKill.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676369/+files/RfKill.txt |
|
| 2016-06-03 22:42:05 |
Bougron |
attachment added |
|
UdevDb.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676370/+files/UdevDb.txt |
|
| 2016-06-03 22:42:07 |
Bougron |
attachment added |
|
WifiSyslog.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676371/+files/WifiSyslog.txt |
|
| 2016-06-03 22:43:45 |
Bougron |
description |
New question #293348 on Ubuntu:
https://answers.launchpad.net/ubuntu/+question/293348
Bonjour. / Hello.
Je peux utiliser ma clé USB3 sur un port USB3 avec windows mais pas avec ubuntu 16.04 sauf à y mettre un prolongateur usb2.
I use my “USB3-key on a USB3 port with Windows but not with ubuntu 16.04 except to put a USB2 extender.
u1604btrfs@u1604btrfs:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04 LTS"
u1604btrfs@u1604btrfs:~$
La clé USB3 de 64 GO connectée directement à un port USB3 n’a aucun problème avec windows10 avec un débit moyen de 42 MB/s.
The USB3 64GB connected directly to a USB3 port was no problem with Windows 10 with an average throughput of 42 MB / s.
La clé USB3 de 64 GO connectée via un càble USB de prolongation (20 cm) à un port USB3 fonctionne avec un débit moyen de 26 MB/s avec ubuntu.
The USB3 64GB connected via an extension USB cable (20 cm) to a USB3 port works with an average throughput of 26 MB / s with ubuntu.
Un disque USB3 connecté à ce même port USB3 fonctionne avec un débit moyen de 106 MB/s avec ubuntu,
A USB3 drive connected to the same USB3 port works with an average throughput of 106 MB / s with ubuntu.
La clé USB3 de 64 GO connectée directement à un port USB3 ne se monte pas avec ubuntu, Je pense à un problème logiciel. Merci de votre avis.
The USB 3 64GB connected directly to a USB3 port does not go up with ubuntu. I think to a software problem, Thanks for your review,
Trace DMESG du branchement direct.
Trace DMESG direct connection.
[15027.934173] usb 3-1: USB disconnect, device number 3
[15113.908384] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[15113.949359] usb 4-1: New USB device found, idVendor=0951, idProduct=1666
[15113.949370] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15113.949377] usb 4-1: Product: DataTraveler 3.0
[15113.949387] usb 4-1: Manufacturer: Kingston
[15113.949395] usb 4-1: SerialNumber: 60A44C426697FE50C98100E8
[15118.948235] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.951961] usb 4-1: Disable of device-initiated U1 failed.
[15118.955466] usb 4-1: Disable of device-initiated U2 failed.
[15118.955474] usb-storage 4-1:1.0: USB Mass Storage device detected
[15118.955648] scsi host9: usb-storage 4-1:1.0
[15118.959180] usb 4-1: Set SEL for device-initiated U1 failed.
[15118.962661] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.962810] usb 4-1: USB disconnect, device number 3
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Trace DMESG du branchement avec un câble prolongateur.
Trace DMESG connecting with an extension cable.
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15930.041889] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[15930.248230] usb 3-1: New USB device found, idVendor=0951, idProduct=1666
[15930.248237] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15930.248241] usb 3-1: Product: DataTraveler 3.0
[15930.248244] usb 3-1: Manufacturer: Kingston
[15930.248246] usb 3-1: SerialNumber: 60A44C426697FE50C98100E8
[15930.248591] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.248610] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.249352] usb-storage 3-1:1.0: USB Mass Storage device detected
[15930.251542] scsi host10: usb-storage 3-1:1.0
[15932.447123] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 3.0 1.00 PQ: 0 ANSI: 6
[15932.447953] sd 10:0:0:0: Attached scsi generic sg2 type 0
[15932.449447] sd 10:0:0:0: [sdb] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
[15932.451694] sd 10:0:0:0: [sdb] Write Protect is off
[15932.451704] sd 10:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[15932.453308] sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[15932.470160] sdb: sdb1 sdb2 sdb3 sdb4
[15932.472853] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[15933.102257] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[15933.128433] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
u1604btrfs@u1604btrfs:~$
---
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: u604 2383 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 16.04
MachineType: TOSHIBA SATELLITE S70t-A
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed root=UUID=17f90115-fe0b-440d-9708-7039508c3003 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
RelatedPackageVersions:
linux-restricted-modules-4.4.0-22-generic N/A
linux-backports-modules-4.4.0-22-generic N/A
linux-firmware 1.157
Tags: xenial
Uname: Linux 4.4.0-22-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/18/2014
dmi.bios.vendor: Insyde Corp.
dmi.bios.version: 1.30
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Type2 - Board Product Name1
dmi.board.vendor: Type2 - Board Vendor Name1
dmi.board.version: Type2 - Board Version
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: OEM Chassis Manufacturer
dmi.chassis.version: OEM Chassis Version
dmi.modalias: dmi:bvnInsydeCorp.:bvr1.30:bd04/18/2014:svnTOSHIBA:pnSATELLITES70t-A:pvrPSKN6E-01C00KFR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
dmi.product.name: SATELLITE S70t-A
dmi.product.version: PSKN6E-01C00KFR
dmi.sys.vendor: TOSHIBA |
New question #293348 on Ubuntu:
https://answers.launchpad.net/ubuntu/+question/293348
Bonjour. / Hello.
Je peux utiliser ma clé USB3 sur un port USB3 avec windows mais pas avec ubuntu 16.04 sauf à y mettre un prolongateur usb2.
I use my “USB3-key on a USB3 port with Windows but not with ubuntu 16.04 except to put a USB2 extender.
u1604btrfs@u1604btrfs:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04 LTS"
u1604btrfs@u1604btrfs:~$
La clé USB3 de 64 GO connectée directement à un port USB3 n’a aucun problème avec windows10 avec un débit moyen de 42 MB/s.
The USB3 64GB connected directly to a USB3 port was no problem with Windows 10 with an average throughput of 42 MB / s.
La clé USB3 de 64 GO connectée via un càble USB de prolongation (20 cm) à un port USB3 fonctionne avec un débit moyen de 26 MB/s avec ubuntu.
The USB3 64GB connected via an extension USB cable (20 cm) to a USB3 port works with an average throughput of 26 MB / s with ubuntu.
Un disque USB3 connecté à ce même port USB3 fonctionne avec un débit moyen de 106 MB/s avec ubuntu,
A USB3 drive connected to the same USB3 port works with an average throughput of 106 MB / s with ubuntu.
La clé USB3 de 64 GO connectée directement à un port USB3 ne se monte pas avec ubuntu, Je pense à un problème logiciel. Merci de votre avis.
The USB 3 64GB connected directly to a USB3 port does not go up with ubuntu. I think to a software problem, Thanks for your review,
Trace DMESG du branchement direct.
Trace DMESG direct connection.
[15027.934173] usb 3-1: USB disconnect, device number 3
[15113.908384] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[15113.949359] usb 4-1: New USB device found, idVendor=0951, idProduct=1666
[15113.949370] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15113.949377] usb 4-1: Product: DataTraveler 3.0
[15113.949387] usb 4-1: Manufacturer: Kingston
[15113.949395] usb 4-1: SerialNumber: 60A44C426697FE50C98100E8
[15118.948235] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.951961] usb 4-1: Disable of device-initiated U1 failed.
[15118.955466] usb 4-1: Disable of device-initiated U2 failed.
[15118.955474] usb-storage 4-1:1.0: USB Mass Storage device detected
[15118.955648] scsi host9: usb-storage 4-1:1.0
[15118.959180] usb 4-1: Set SEL for device-initiated U1 failed.
[15118.962661] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.962810] usb 4-1: USB disconnect, device number 3
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Trace DMESG du branchement avec un câble prolongateur.
Trace DMESG connecting with an extension cable.
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15930.041889] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[15930.248230] usb 3-1: New USB device found, idVendor=0951, idProduct=1666
[15930.248237] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15930.248241] usb 3-1: Product: DataTraveler 3.0
[15930.248244] usb 3-1: Manufacturer: Kingston
[15930.248246] usb 3-1: SerialNumber: 60A44C426697FE50C98100E8
[15930.248591] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.248610] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.249352] usb-storage 3-1:1.0: USB Mass Storage device detected
[15930.251542] scsi host10: usb-storage 3-1:1.0
[15932.447123] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 3.0 1.00 PQ: 0 ANSI: 6
[15932.447953] sd 10:0:0:0: Attached scsi generic sg2 type 0
[15932.449447] sd 10:0:0:0: [sdb] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
[15932.451694] sd 10:0:0:0: [sdb] Write Protect is off
[15932.451704] sd 10:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[15932.453308] sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[15932.470160] sdb: sdb1 sdb2 sdb3 sdb4
[15932.472853] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[15933.102257] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[15933.128433] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
u1604btrfs@u1604btrfs:~$
---
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: u604 2383 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 16.04
MachineType: TOSHIBA SATELLITE S70t-A
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed root=UUID=17f90115-fe0b-440d-9708-7039508c3003 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
RelatedPackageVersions:
linux-restricted-modules-4.4.0-22-generic N/A
linux-backports-modules-4.4.0-22-generic N/A
linux-firmware 1.157
Tags: xenial
Uname: Linux 4.4.0-22-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/18/2014
dmi.bios.vendor: Insyde Corp.
dmi.bios.version: 1.30
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Type2 - Board Product Name1
dmi.board.vendor: Type2 - Board Vendor Name1
dmi.board.version: Type2 - Board Version
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: OEM Chassis Manufacturer
dmi.chassis.version: OEM Chassis Version
dmi.modalias: dmi:bvnInsydeCorp.:bvr1.30:bd04/18/2014:svnTOSHIBA:pnSATELLITES70t-A:pvrPSKN6E-01C00KFR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
dmi.product.name: SATELLITE S70t-A
dmi.product.version: PSKN6E-01C00KFR
dmi.sys.vendor: TOSHIBA
---
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: u604 2383 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 16.04
MachineType: TOSHIBA SATELLITE S70t-A
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed root=UUID=17f90115-fe0b-440d-9708-7039508c3003 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
RelatedPackageVersions:
linux-restricted-modules-4.4.0-22-generic N/A
linux-backports-modules-4.4.0-22-generic N/A
linux-firmware 1.157
Tags: xenial
Uname: Linux 4.4.0-22-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/18/2014
dmi.bios.vendor: Insyde Corp.
dmi.bios.version: 1.30
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Type2 - Board Product Name1
dmi.board.vendor: Type2 - Board Vendor Name1
dmi.board.version: Type2 - Board Version
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: OEM Chassis Manufacturer
dmi.chassis.version: OEM Chassis Version
dmi.modalias: dmi:bvnInsydeCorp.:bvr1.30:bd04/18/2014:svnTOSHIBA:pnSATELLITES70t-A:pvrPSKN6E-01C00KFR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
dmi.product.name: SATELLITE S70t-A
dmi.product.version: PSKN6E-01C00KFR
dmi.sys.vendor: TOSHIBA |
|
| 2016-06-03 22:43:47 |
Bougron |
attachment added |
|
AlsaInfo.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676372/+files/AlsaInfo.txt |
|
| 2016-06-03 22:43:48 |
Bougron |
attachment added |
|
CRDA.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676373/+files/CRDA.txt |
|
| 2016-06-03 22:43:49 |
Bougron |
attachment added |
|
CurrentDmesg.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676374/+files/CurrentDmesg.txt |
|
| 2016-06-03 22:43:51 |
Bougron |
attachment added |
|
IwConfig.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676375/+files/IwConfig.txt |
|
| 2016-06-03 22:43:52 |
Bougron |
attachment added |
|
JournalErrors.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676376/+files/JournalErrors.txt |
|
| 2016-06-03 22:43:53 |
Bougron |
attachment added |
|
Lspci.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676377/+files/Lspci.txt |
|
| 2016-06-03 22:43:55 |
Bougron |
attachment added |
|
Lsusb.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676378/+files/Lsusb.txt |
|
| 2016-06-03 22:43:56 |
Bougron |
attachment added |
|
ProcCpuinfo.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676379/+files/ProcCpuinfo.txt |
|
| 2016-06-03 22:43:58 |
Bougron |
attachment added |
|
ProcEnviron.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676380/+files/ProcEnviron.txt |
|
| 2016-06-03 22:43:59 |
Bougron |
attachment added |
|
ProcInterrupts.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676381/+files/ProcInterrupts.txt |
|
| 2016-06-03 22:44:00 |
Bougron |
attachment added |
|
ProcModules.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676382/+files/ProcModules.txt |
|
| 2016-06-03 22:44:02 |
Bougron |
attachment added |
|
PulseList.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676383/+files/PulseList.txt |
|
| 2016-06-03 22:44:04 |
Bougron |
attachment added |
|
RfKill.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676384/+files/RfKill.txt |
|
| 2016-06-03 22:44:07 |
Bougron |
attachment added |
|
UdevDb.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676385/+files/UdevDb.txt |
|
| 2016-06-03 22:44:10 |
Bougron |
attachment added |
|
WifiSyslog.txt https://bugs.launchpad.net/bugs/1588467/+attachment/4676386/+files/WifiSyslog.txt |
|
| 2016-06-03 22:47:05 |
Bougron |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|
| 2016-06-06 11:36:23 |
penalvch |
tags |
apport-collected xenial |
apport-collected bios-outdated-1.60 xenial |
|
| 2016-06-06 11:42:47 |
penalvch |
attachment removed |
WifiSyslog.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676371/+files/WifiSyslog.txt |
|
|
| 2016-06-06 11:42:47 |
penalvch |
attachment removed |
UdevDb.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676370/+files/UdevDb.txt |
|
|
| 2016-06-06 11:42:48 |
penalvch |
attachment removed |
RfKill.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676369/+files/RfKill.txt |
|
|
| 2016-06-06 11:42:49 |
penalvch |
attachment removed |
PulseList.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676368/+files/PulseList.txt |
|
|
| 2016-06-06 11:42:51 |
penalvch |
attachment removed |
ProcModules.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676367/+files/ProcModules.txt |
|
|
| 2016-06-06 11:42:51 |
penalvch |
attachment removed |
ProcInterrupts.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676366/+files/ProcInterrupts.txt |
|
|
| 2016-06-06 11:42:52 |
penalvch |
attachment removed |
ProcEnviron.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676365/+files/ProcEnviron.txt |
|
|
| 2016-06-06 11:42:53 |
penalvch |
attachment removed |
ProcCpuinfo.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676364/+files/ProcCpuinfo.txt |
|
|
| 2016-06-06 11:42:54 |
penalvch |
attachment removed |
Lsusb.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676363/+files/Lsusb.txt |
|
|
| 2016-06-06 11:42:55 |
penalvch |
attachment removed |
Lspci.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676362/+files/Lspci.txt |
|
|
| 2016-06-06 11:42:56 |
penalvch |
attachment removed |
JournalErrors.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676361/+files/JournalErrors.txt |
|
|
| 2016-06-06 11:42:57 |
penalvch |
attachment removed |
IwConfig.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676360/+files/IwConfig.txt |
|
|
| 2016-06-06 11:42:58 |
penalvch |
attachment removed |
CurrentDmesg.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676359/+files/CurrentDmesg.txt |
|
|
| 2016-06-06 11:42:59 |
penalvch |
attachment removed |
CRDA.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676358/+files/CRDA.txt |
|
|
| 2016-06-06 11:43:00 |
penalvch |
attachment removed |
AlsaInfo.txt https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1588467/+attachment/4676357/+files/AlsaInfo.txt |
|
|
| 2016-06-06 11:50:34 |
penalvch |
linux (Ubuntu): importance |
Undecided |
Low |
|
| 2016-06-06 11:50:34 |
penalvch |
linux (Ubuntu): status |
Confirmed |
Incomplete |
|
| 2016-06-06 11:51:07 |
penalvch |
description |
New question #293348 on Ubuntu:
https://answers.launchpad.net/ubuntu/+question/293348
Bonjour. / Hello.
Je peux utiliser ma clé USB3 sur un port USB3 avec windows mais pas avec ubuntu 16.04 sauf à y mettre un prolongateur usb2.
I use my “USB3-key on a USB3 port with Windows but not with ubuntu 16.04 except to put a USB2 extender.
u1604btrfs@u1604btrfs:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04 LTS"
u1604btrfs@u1604btrfs:~$
La clé USB3 de 64 GO connectée directement à un port USB3 n’a aucun problème avec windows10 avec un débit moyen de 42 MB/s.
The USB3 64GB connected directly to a USB3 port was no problem with Windows 10 with an average throughput of 42 MB / s.
La clé USB3 de 64 GO connectée via un càble USB de prolongation (20 cm) à un port USB3 fonctionne avec un débit moyen de 26 MB/s avec ubuntu.
The USB3 64GB connected via an extension USB cable (20 cm) to a USB3 port works with an average throughput of 26 MB / s with ubuntu.
Un disque USB3 connecté à ce même port USB3 fonctionne avec un débit moyen de 106 MB/s avec ubuntu,
A USB3 drive connected to the same USB3 port works with an average throughput of 106 MB / s with ubuntu.
La clé USB3 de 64 GO connectée directement à un port USB3 ne se monte pas avec ubuntu, Je pense à un problème logiciel. Merci de votre avis.
The USB 3 64GB connected directly to a USB3 port does not go up with ubuntu. I think to a software problem, Thanks for your review,
Trace DMESG du branchement direct.
Trace DMESG direct connection.
[15027.934173] usb 3-1: USB disconnect, device number 3
[15113.908384] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[15113.949359] usb 4-1: New USB device found, idVendor=0951, idProduct=1666
[15113.949370] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15113.949377] usb 4-1: Product: DataTraveler 3.0
[15113.949387] usb 4-1: Manufacturer: Kingston
[15113.949395] usb 4-1: SerialNumber: 60A44C426697FE50C98100E8
[15118.948235] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.951961] usb 4-1: Disable of device-initiated U1 failed.
[15118.955466] usb 4-1: Disable of device-initiated U2 failed.
[15118.955474] usb-storage 4-1:1.0: USB Mass Storage device detected
[15118.955648] scsi host9: usb-storage 4-1:1.0
[15118.959180] usb 4-1: Set SEL for device-initiated U1 failed.
[15118.962661] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.962810] usb 4-1: USB disconnect, device number 3
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Trace DMESG du branchement avec un câble prolongateur.
Trace DMESG connecting with an extension cable.
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15930.041889] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[15930.248230] usb 3-1: New USB device found, idVendor=0951, idProduct=1666
[15930.248237] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15930.248241] usb 3-1: Product: DataTraveler 3.0
[15930.248244] usb 3-1: Manufacturer: Kingston
[15930.248246] usb 3-1: SerialNumber: 60A44C426697FE50C98100E8
[15930.248591] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.248610] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.249352] usb-storage 3-1:1.0: USB Mass Storage device detected
[15930.251542] scsi host10: usb-storage 3-1:1.0
[15932.447123] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 3.0 1.00 PQ: 0 ANSI: 6
[15932.447953] sd 10:0:0:0: Attached scsi generic sg2 type 0
[15932.449447] sd 10:0:0:0: [sdb] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
[15932.451694] sd 10:0:0:0: [sdb] Write Protect is off
[15932.451704] sd 10:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[15932.453308] sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[15932.470160] sdb: sdb1 sdb2 sdb3 sdb4
[15932.472853] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[15933.102257] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[15933.128433] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
u1604btrfs@u1604btrfs:~$
---
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: u604 2383 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 16.04
MachineType: TOSHIBA SATELLITE S70t-A
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed root=UUID=17f90115-fe0b-440d-9708-7039508c3003 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
RelatedPackageVersions:
linux-restricted-modules-4.4.0-22-generic N/A
linux-backports-modules-4.4.0-22-generic N/A
linux-firmware 1.157
Tags: xenial
Uname: Linux 4.4.0-22-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/18/2014
dmi.bios.vendor: Insyde Corp.
dmi.bios.version: 1.30
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Type2 - Board Product Name1
dmi.board.vendor: Type2 - Board Vendor Name1
dmi.board.version: Type2 - Board Version
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: OEM Chassis Manufacturer
dmi.chassis.version: OEM Chassis Version
dmi.modalias: dmi:bvnInsydeCorp.:bvr1.30:bd04/18/2014:svnTOSHIBA:pnSATELLITES70t-A:pvrPSKN6E-01C00KFR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
dmi.product.name: SATELLITE S70t-A
dmi.product.version: PSKN6E-01C00KFR
dmi.sys.vendor: TOSHIBA
---
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: u604 2383 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 16.04
MachineType: TOSHIBA SATELLITE S70t-A
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed root=UUID=17f90115-fe0b-440d-9708-7039508c3003 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
RelatedPackageVersions:
linux-restricted-modules-4.4.0-22-generic N/A
linux-backports-modules-4.4.0-22-generic N/A
linux-firmware 1.157
Tags: xenial
Uname: Linux 4.4.0-22-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/18/2014
dmi.bios.vendor: Insyde Corp.
dmi.bios.version: 1.30
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Type2 - Board Product Name1
dmi.board.vendor: Type2 - Board Vendor Name1
dmi.board.version: Type2 - Board Version
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: OEM Chassis Manufacturer
dmi.chassis.version: OEM Chassis Version
dmi.modalias: dmi:bvnInsydeCorp.:bvr1.30:bd04/18/2014:svnTOSHIBA:pnSATELLITES70t-A:pvrPSKN6E-01C00KFR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
dmi.product.name: SATELLITE S70t-A
dmi.product.version: PSKN6E-01C00KFR
dmi.sys.vendor: TOSHIBA |
New question #293348 on Ubuntu:
https://answers.launchpad.net/ubuntu/+question/293348
Bonjour. / Hello.
Je peux utiliser ma clé USB3 sur un port USB3 avec windows mais pas avec ubuntu 16.04 sauf à y mettre un prolongateur usb2.
I use my “USB3-key on a USB3 port with Windows but not with ubuntu 16.04 except to put a USB2 extender.
u1604btrfs@u1604btrfs:~$ cat /etc/lsb-release
DISTRIB_ID=Ubuntu
DISTRIB_RELEASE=16.04
DISTRIB_CODENAME=xenial
DISTRIB_DESCRIPTION="Ubuntu 16.04 LTS"
u1604btrfs@u1604btrfs:~$
La clé USB3 de 64 GO connectée directement à un port USB3 n’a aucun problème avec windows10 avec un débit moyen de 42 MB/s.
The USB3 64GB connected directly to a USB3 port was no problem with Windows 10 with an average throughput of 42 MB / s.
La clé USB3 de 64 GO connectée via un càble USB de prolongation (20 cm) à un port USB3 fonctionne avec un débit moyen de 26 MB/s avec ubuntu.
The USB3 64GB connected via an extension USB cable (20 cm) to a USB3 port works with an average throughput of 26 MB / s with ubuntu.
Un disque USB3 connecté à ce même port USB3 fonctionne avec un débit moyen de 106 MB/s avec ubuntu,
A USB3 drive connected to the same USB3 port works with an average throughput of 106 MB / s with ubuntu.
La clé USB3 de 64 GO connectée directement à un port USB3 ne se monte pas avec ubuntu, Je pense à un problème logiciel. Merci de votre avis.
The USB 3 64GB connected directly to a USB3 port does not go up with ubuntu. I think to a software problem, Thanks for your review,
Trace DMESG du branchement direct.
Trace DMESG direct connection.
[15027.934173] usb 3-1: USB disconnect, device number 3
[15113.908384] usb 4-1: new SuperSpeed USB device number 3 using xhci_hcd
[15113.949359] usb 4-1: New USB device found, idVendor=0951, idProduct=1666
[15113.949370] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15113.949377] usb 4-1: Product: DataTraveler 3.0
[15113.949387] usb 4-1: Manufacturer: Kingston
[15113.949395] usb 4-1: SerialNumber: 60A44C426697FE50C98100E8
[15118.948235] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.951961] usb 4-1: Disable of device-initiated U1 failed.
[15118.955466] usb 4-1: Disable of device-initiated U2 failed.
[15118.955474] usb-storage 4-1:1.0: USB Mass Storage device detected
[15118.955648] scsi host9: usb-storage 4-1:1.0
[15118.959180] usb 4-1: Set SEL for device-initiated U1 failed.
[15118.962661] usb 4-1: Set SEL for device-initiated U2 failed.
[15118.962810] usb 4-1: USB disconnect, device number 3
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
Trace DMESG du branchement avec un câble prolongateur.
Trace DMESG connecting with an extension cable.
[15455.620301] perf interrupt took too long (2527 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[15930.041889] usb 3-1: new high-speed USB device number 4 using xhci_hcd
[15930.248230] usb 3-1: New USB device found, idVendor=0951, idProduct=1666
[15930.248237] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[15930.248241] usb 3-1: Product: DataTraveler 3.0
[15930.248244] usb 3-1: Manufacturer: Kingston
[15930.248246] usb 3-1: SerialNumber: 60A44C426697FE50C98100E8
[15930.248591] usb 3-1: ep 0x81 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.248610] usb 3-1: ep 0x2 - rounding interval to 128 microframes, ep desc says 255 microframes
[15930.249352] usb-storage 3-1:1.0: USB Mass Storage device detected
[15930.251542] scsi host10: usb-storage 3-1:1.0
[15932.447123] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 3.0 1.00 PQ: 0 ANSI: 6
[15932.447953] sd 10:0:0:0: Attached scsi generic sg2 type 0
[15932.449447] sd 10:0:0:0: [sdb] 120845300 512-byte logical blocks: (61.9 GB/57.6 GiB)
[15932.451694] sd 10:0:0:0: [sdb] Write Protect is off
[15932.451704] sd 10:0:0:0: [sdb] Mode Sense: 4f 00 00 00
[15932.453308] sd 10:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[15932.470160] sdb: sdb1 sdb2 sdb3 sdb4
[15932.472853] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[15933.102257] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: (null)
[15933.128433] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
u1604btrfs@u1604btrfs:~$
---
ApportVersion: 2.20.1-0ubuntu2.1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: u604 2383 F.... pulseaudio
CurrentDesktop: Unity
DistroRelease: Ubuntu 16.04
MachineType: TOSHIBA SATELLITE S70t-A
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-4.4.0-22-generic.efi.signed root=UUID=17f90115-fe0b-440d-9708-7039508c3003 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 4.4.0-22.40-generic 4.4.8
RelatedPackageVersions:
linux-restricted-modules-4.4.0-22-generic N/A
linux-backports-modules-4.4.0-22-generic N/A
linux-firmware 1.157
Tags: xenial
Uname: Linux 4.4.0-22-generic x86_64
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip libvirtd lpadmin plugdev sambashare sudo
_MarkForUpload: True
dmi.bios.date: 04/18/2014
dmi.bios.vendor: Insyde Corp.
dmi.bios.version: 1.30
dmi.board.asset.tag: Type2 - Board Asset Tag
dmi.board.name: Type2 - Board Product Name1
dmi.board.vendor: Type2 - Board Vendor Name1
dmi.board.version: Type2 - Board Version
dmi.chassis.asset.tag: No Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: OEM Chassis Manufacturer
dmi.chassis.version: OEM Chassis Version
dmi.modalias: dmi:bvnInsydeCorp.:bvr1.30:bd04/18/2014:svnTOSHIBA:pnSATELLITES70t-A:pvrPSKN6E-01C00KFR:rvnType2-BoardVendorName1:rnType2-BoardProductName1:rvrType2-BoardVersion:cvnOEMChassisManufacturer:ct10:cvrOEMChassisVersion:
dmi.product.name: SATELLITE S70t-A
dmi.product.version: PSKN6E-01C00KFR
dmi.sys.vendor: TOSHIBA |
|
| 2016-06-07 22:30:30 |
Bougron |
linux (Ubuntu): status |
Incomplete |
Confirmed |
|
| 2016-06-07 23:36:12 |
penalvch |
removed subscriber Christopher M. Penalver |
|
|
|
