With BIOS upgraded to A06 [1] (the A12 BIOS here is for Optiplex 3010), nothing changed on 3.13.0-rc2.
It finished the 30 cycle suspend test again, with the same error message in dmesg and fwts report.
Also, the failed to be enabled device: usb 1-4, which I guess is the webcam, still working after suspend.
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
|__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 4: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
|__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
|__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
|__ Port 4: Dev 126, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 126, If 1, Class=Video, Driver=uvcvideo, 480M
Test case:
1. Boot to desktop, open cheese, make sure the webcam is working correctly
2. Run sudo fwts -P s3 --s3-multiple=30 --s3-device-check --s3-device-check-delay 45
3. Check if the webcam is still working.
With BIOS upgraded to A06 [1] (the A12 BIOS here is for Optiplex 3010), nothing changed on 3.13.0-rc2.
It finished the 30 cycle suspend test again, with the same error message in dmesg and fwts report.
Also, the failed to be enabled device: usb 1-4, which I guess is the webcam, still working after suspend.
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=ehci-pci/2p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/6p, 480M
|__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 2: Dev 4, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M
|__ Port 3: Dev 5, If 0, Class=Mass Storage, Driver=usb-storage, 480M
|__ Port 4: Dev 6, If 0, Class=Mass Storage, Driver=usb-storage, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
|__ Port 1: Dev 3, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
|__ Port 2: Dev 2, If 0, Class=Mass Storage, Driver=usb-storage, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 480M
|__ Port 4: Dev 126, If 0, Class=Video, Driver=uvcvideo, 480M
|__ Port 4: Dev 126, If 1, Class=Video, Driver=uvcvideo, 480M
Test case: check-delay 45
1. Boot to desktop, open cheese, make sure the webcam is working correctly
2. Run sudo fwts -P s3 --s3-multiple=30 --s3-device-check --s3-device-
3. Check if the webcam is still working.
[1] http:// www.dell. com/support/ home/us/ en/19/Drivers/ DriversDetails? driverId= NFFGR&fileId= 3401380743& osCode= W764&productCod e=optiplex- 3011-aio& languageCode= EN&categoryId= BI