Comment 53 for bug 1328727
Revision history for this message
|
|
#53 |
© 2004
Canonical Ltd.
•
Terms of use
•
Data privacy
•
Contact Launchpad Support
•
Blog
•
Careers
•
System status
•
73416ba
(Get the code!)
Created attachment 282103
attachment-
Wow! Here I am to revive this topic in 2019! I have exactly the same
problem, on ubuntu 18.04.2 with basically all kernels since 4.15.0-42 up to
5, which was all I tested, currently on 4.18.0-
has nothing to do with the kernel anyway.
It was working fine before, even with proprietary nvidia drivers which
would generally cause a bug on the resume and not while saving the ram
snapshot. I've been trying to tell this to the ubuntu guys and you can see
my whole story with this problem right here:
https:/
Shortly, I tried with or without nvidia modules enabled (or intel or using
nouveau), many different kernels, disabled i915, and this is all get in
all those different combinations:
https:/
The event is pretty random and seems to be more likely to happen after 2 or
4 gb of ram is ever used (I have 16 in total), and nothing changes if later
I reduce the ram usage later. But is random, I successfully hibernated with
11gb in use yesterday, just resumed and hibernated 5 seconds later without
doing nothing else than running hibernate, and got freeze there.
This also happens randomly if there's just 3 or 2 gb in use, likely on the
second attempt of after more than 5 minutes after the computer is on. What
can be wrong here?
On Tue, Apr 2, 2019, 20:25 Andrew Morton <email address hidden> wrote:
>
> I cc'ed a bunch of people from bugzilla.
>
> Folks, please please please remember to reply via emailed
> reply-to-all. Don't use the bugzilla interface!
>
> On Mon, 16 Jun 2014 18:29:26 +0200 "Rafael J. Wysocki" <
> <email address hidden>> wrote:
>
> > On 6/13/2014 6:55 AM, Johannes Weiner wrote:
> > > On Fri, Jun 13, 2014 at 01:50:47AM +0200, Rafael J. Wysocki wrote:
> > >> On 6/13/2014 12:02 AM, Johannes Weiner wrote:
> > >>> On Tue, May 06, 2014 at 01:45:01AM +0200, Rafael J. Wysocki wrote:
> > >>>> On 5/6/2014 1:33 AM, Johannes Weiner wrote:
> > >>>>> Hi Oliver,
> > >>>>>
> > >>>>> On Mon, May 05, 2014 at 11:00:13PM +0200, Oliver Winker wrote:
> > >>>>>> Hello,
> > >>>>>>
> > >>>>>> 1) Attached a full function-trace log + other SysRq outputs, see
> [1]
> > >>>>>> attached.
> > >>>>>>
> > >>>>>> I saw bdi_...() calls in the s2disk paths, but didn't check in
> detail
> > >>>>>> Probably more efficient when one of you guys looks directly.
> > >>>>> Thanks, this looks interesting. balance_
> > >>>>> bdi_wq workqueue as it should:
> > >>>>>
> > >>>>> [ 249.148009] s2disk-3327 2.... 48550413us :
> global_dirty_limits <-balance_
> > >>>>> [ 249.148009] s2disk-3327 2.... 48550414us :
> global_
> > >>>>> [ 249.148009] s2disk-3327 2.... 48550414us :
> writeback_
> > >>>>> [ 249.148009] s2disk-3327 2.... 48550414us :
> bdi_start_
> > >>>>> [ 249.148009] s2disk-3327 2.... 48550414us :
> mod_delayed_work_on <-balance_
> > >>>>> but the worker wakeup doesn't actually do anything:
> > >>>>> [ 249.148009] kworker/-3466 2d... 48550431us :
> finish_task_switch <-__schedule
> > >>>>> [ 249.148009] kworker/-3466 2.... 48550431us :
> _raw_spin_lock_irq <-worker_thread
> > >>>>> [ 249.148009] kworker/-3466 2d... 48550431us :
> need_to_
> > >>>>> [ 249.148009] kworker/-3466 2d... 48550432us :
> worker_enter_idle <-worker_thread
> > >>>>> [ 249.148009] kworker/-3466 2d... 48550432us :
> too_many_workers <-worker_enter_idle
> > >>>>> [ 249.148009] kworker/-3466 2.... 48550432us : schedule
> <-worker_thread
> > >>>>> [ 249.148009] kworker/-3466 2.... 48550432us : __schedule
> <-worker_thread
> > >>>>>
> > >>>>> My suspicion is that this fails because the bdi_wq is frozen at
> this
> > >>>>> point and so the flush work never runs until resume, whereas
> before my
> > >>>>> patch the effective dirty limit was high enough so that image
> could be
> > >>>>> written in one go without being throttled; followed by an fsync()
> that
> > >>>>> then writes the pages in the context of the unfrozen s2disk.
> > >>>>>
> > >>>>> Does this make sense? Rafael? Tejun?
> > >>>> Well, it does seem to make sense to me.
> > >>> From what I see, this is a deadlock in the userspace suspend model
> and
> > >>> just happened to work by chance in the past.
> > >> Well, it had been working for quite a while, so it was a rather large
> > >> opportunity
> > >> window it seems. :-)
> > > No doubt about that, and I feel bad that it broke. But it's still a
> > > deadlock that can't reasonably be accommodated from dirty throttling.
> > >
> > > It can't just put the flushers to sleep and then issue a large amount
> > > of buffered IO, hoping it doesn't hit the dirty limits. Don't shoot
> > > the messenger, this bug needs to be addressed, not get papered over.
> > >
> > >>> Can we patch suspend-utils as follows?
> > >> Perhaps we can. Let's ask the new maintainer.
> > >>
> > >> Rodolfo, do you think you can apply the patch below to suspend-utils?
> > >>
> > >>> Alternatively, suspend-utils
> > >>> could clear the dirty limits before it starts writing and restore
> them
> > >>> post-resume.
> > >> That (and the patch too) doesn't seem to address the problem with
> existing
> > >> suspend-utils
> > >> binaries, however.
> > > It's userspace that freezes the system before issuing buffered IO, so
> > > my conclusion was that the bug is in there. This is arguable. I also
> > > wouldn't be opposed to a patch that sets the dirty limits to infinity
> > > from the ioctl that freezes the system or creates the image.
> >
> > OK, that sounds like a workable plan.
> >
> > How do I set those limits to infinity?
>
> Five years have passed and people are still hitting this.
>
> Killian described the workaround in comment 14 at
> https:/
>
> People can use this workaround manually by hand or in scripts. But we
> really should find a proper solution. Maybe special-case the freezing
> of the flusher threads until all the writeout has completed. Or
> something else.
>