gnome-power-manager may be related to black screen and auto-power-on noise and Xorg crash

[Del Socorro Françoise]

Hello,

My HP Compaq Presario CQ70 a very old portable computer notebook have been having black screens some sessions after being used from Precise to Saucy.

Yesterday I just had Precise being installed. But this morning black screen. And also a very weird part to explain. You might believe in the weird part or not but I say as it is since it occured already twice and I used pc twice today.

lsb_release -c -d && uname -s -r && lspci | grep -i VGA
Description: Ubuntu 12.04.4 LTS
Codename: precise
Linux 3.11.0-18-generic
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)

sudo dpkg -s gnome-power-manager
Package: gnome-power-manager
Status: purge ok installed
Priority: optional
Section: gnome
Installed-Size: 1584
Maintainer: Ubuntu Developers <email address hidden>
Architecture: i386
Version: 3.4.0-0ubuntu1.1
etc.

Last lost of Precise this morning:
- Even thought I had tooken out big battery (material) some years ago from my pc, this morning he made some noise alone, without being on electricity power and without battery, not being other PC at home (I checked they were off), true noise when my PC is working, so I deduced my old PC had become photo-voltaïc like solar panels, it tryed to turn on alone with morning sun light.
- Then when I put electricity on, it tryed alone to login Ubuntu with laptop closed. I heard Ubuntu welcome noise sound, so I opened laptop. I did not touch on/off button. Then what I saw was white mouse on black screen. Deduction: Xorg crashed.
- Then when I pulled OFF button to shut him up, then re-start, he restarted on black screen in silence, except for the internal noise. No Ubuntu welcome noise.
- Then when I took out electricity cable to restart it (since it thinks one method is the other one), it restarted (without the ON button) on the black screen in silence (except for usual internal noise).
- Then I restarted it and I re-installed Precise from USB in blind because I have external monitor/screen/display so I had to memorize BIOS in a blind way, since it doesn't appears in external monitor.
- More info: I had put xdiagnose at beginning, and none of the time he did the internal noise before black screen, he did put xdiagnose output on screen before BIOS question that I can't see. Before he did put just at start xdiagnose.

Result: He only support a few sessions before going black screen.
Conclusion: He mistakes ON / OFF / SLEEP / WORK

Than I took some info. Even downloaded it, but couldn't put it on external USB. So I have it in my e-mail, all ancient logs of errors or not. And also posted some: Precise while not OK, and Precise in USB new. I'll post you later.

So this morning, after Precise beeing installed. Noticed again, when came back to living room. Noice, but very very low and no battery and no electricity. If my living room was little more noisy, I wouldn't have noticed. PC is off, no electricity, no battery and yet, very very low 3 noise types:
- the continuous noise
- two times a noise at right (Enter and numbers side)
- once a noise at left, the one when we got PC ON
- no lights
All almost not audible, very very low. Could be my memory neurones that memorized thoses noises or my PC had become photo-voltaïc ? PC is old so could also be material problems.

So now for bug analysis, data you undersatand.
Joined log.tar.gz so you can see errors.

Only seen error that has to do with you, also present in this brand new Precise is:
  *-power UNCLAIMED
       description: OEM_Define1
       product: OEM_Define4
       vendor: OEM_Define2
       physical id: 1
       version: OEM_Define5
       serial: OEM_Define2
       capacity: 75mWh

***************************************************************************************************
Answering Launchpad questions
cat /proc/version_signature
Ubuntu 3.11.0-18.32~precise1-generic 3.11.10.4

sudo lspci -vnvn
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information: Len=0a <?>
 Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 44
 Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
 Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
 Region 4: I/O ports at 5110 [size=8]
 Expansion ROM at <unassigned> [disabled]
 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee0100c Data: 4122
 Capabilities: [d0] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Kernel driver in use: i915
 Kernel modules: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Region 0: Memory at 92500000 (64-bit, non-prefetchable) [size=1M]
 Capabilities: [d0] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin A routed to IRQ 18
 Region 4: I/O ports at 50e0 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 19
 Region 4: I/O ports at 50c0 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 17
 Region 4: I/O ports at 50a0 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 18
 Region 0: Memory at 94705c00 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Capabilities: [98] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 45
 Region 0: Memory at 94700000 (64-bit, non-prefetchable) [size=16K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee0100c Data: 4152
 Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- RBE- FLReset+
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
   ClockPM- Surprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
 Capabilities: [100 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed- WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=7f
   Status: NegoPending- InProgress-
  VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80
   Status: NegoPending- InProgress-
 Capabilities: [130 v1] Root Complex Link
  Desc: PortNumber=0f ComponentID=02 EltType=Config
  Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
   Addr: 00000000fed1c000
 Kernel driver in use: snd_hda_intel
 Kernel modules: snd-hda-intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
 I/O behind bridge: 00003000-00004fff
 Memory behind bridge: 93700000-946fffff
 Prefetchable memory behind bridge: 0000000090400000-00000000914fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
   ClockPM- Surprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
   Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState+
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee0300c Data: 4191
 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:360b]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed+ WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
   Status: NegoPending- InProgress-
 Capabilities: [180 v1] Root Complex Link
  Desc: PortNumber=01 ComponentID=02 EltType=Config
  Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
   Addr: 00000000fed1c000
 Kernel driver in use: pcieport
 Kernel modules: shpchp

00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
 I/O behind bridge: 00002000-00002fff
 Memory behind bridge: 92600000-936fffff
 Prefetchable memory behind bridge: 0000000091500000-00000000924fffff
 Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
   ExtTag- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 128 bytes
  DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
   ClockPM- Surprise- LLActRep+ BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
  SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
   Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
  SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
   Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
   Changed: MRL- PresDet- LinkState+
  RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
  RootCap: CRSVisible-
  RootSta: PME ReqID 0000, PMEStatus- PMEPending-
 Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
  Address: fee0300c Data: 41a1
 Capabilities: [90] Subsystem: Hewlett-Packard Company Device [103c:360b]
 Capabilities: [a0] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [100 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed+ WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
   Status: NegoPending- InProgress-
 Capabilities: [180 v1] Root Complex Link
  Desc: PortNumber=02 ComponentID=02 EltType=Config
  Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
   Addr: 00000000fed1c000
 Kernel driver in use: pcieport
 Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 18
 Region 4: I/O ports at 5080 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin C routed to IRQ 19
 Region 4: I/O ports at 5060 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin D routed to IRQ 17
 Region 4: I/O ports at 5040 [size=32]
 Capabilities: [50] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 18
 Region 0: Memory at 94705800 (32-bit, non-prefetchable) [size=1K]
 Capabilities: [50] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [58] Debug port: BAR=1 offset=00a0
 Capabilities: [98] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
  PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
 Capabilities: [50] Subsystem: Hewlett-Packard Company Device [103c:360b]

00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Capabilities: [e0] Vendor Specific Information: Len=0c <?>
 Kernel driver in use: lpc_ich
 Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0
 Interrupt: pin B routed to IRQ 42
 Region 0: I/O ports at 5108 [size=8]
 Region 1: I/O ports at 511c [size=4]
 Region 2: I/O ports at 5100 [size=8]
 Region 3: I/O ports at 5118 [size=4]
 Region 4: I/O ports at 5020 [size=32]
 Region 5: Memory at 94705000 (32-bit, non-prefetchable) [size=2K]
 Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
  Address: fee0100c Data: 41c1
 Capabilities: [70] Power Management version 3
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
 Capabilities: [b0] PCI Advanced Features
  AFCap: TP+ FLR+
  AFCtrl: FLR-
  AFStatus: TP-
 Kernel driver in use: ahci
 Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin C routed to IRQ 11
 Region 0: Memory at 94706000 (64-bit, non-prefetchable) [size=256]
 Region 4: I/O ports at 5000 [size=32]
 Kernel modules: i2c-i801

00:1f.6 Signal processing controller [1180]: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem [8086:2932] (rev 03)
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Interrupt: pin C routed to IRQ 11
 Region 0: Memory at 94704000 (64-bit, non-prefetchable) [size=4K]
 Capabilities: [50] Power Management version 3
  Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-

01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
 Subsystem: Hewlett-Packard Company Device [103c:360b]
 Physical Slot: 0
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 43
 Region 0: I/O ports at 3000 [size=256]
 Region 2: Memory at 90410000 (64-bit, prefetchable) [size=4K]
 Region 4: Memory at 90400000 (64-bit, prefetchable) [size=64K]
 Expansion ROM at 90420000 [disabled] [size=128K]
 Capabilities: [40] Power Management version 3
  Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
  Address: 00000000fee0200c Data: 41e1
 Capabilities: [70] Express (v2) Endpoint, MSI 01
  DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 4096 bytes
  DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
   ClockPM+ Surprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  DevCap2: Completion Timeout: Not Supported, TimeoutDis+
  DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
  LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
    Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
    Compliance De-emphasis: -6dB
  LnkSta2: Current De-emphasis Level: -6dB
 Capabilities: [ac] MSI-X: Enable- Count=2 Masked-
  Vector table: BAR=4 offset=00000000
  PBA: BAR=4 offset=00000800
 Capabilities: [cc] Vital Product Data
  Unknown small resource type 00, will not decode more.
 Capabilities: [100 v1] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
  AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
 Capabilities: [140 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed- WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
   Status: NegoPending- InProgress-
 Capabilities: [160 v1] Device Serial Number 09-00-00-00-ff-ff-00-00
 Kernel driver in use: r8169
 Kernel modules: r8169

02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
 Subsystem: Hewlett-Packard Company Device [103c:137b]
 Physical Slot: 1
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
 Latency: 0, Cache Line Size: 64 bytes
 Interrupt: pin A routed to IRQ 17
 Region 0: Memory at 92600000 (64-bit, non-prefetchable) [size=64K]
 Capabilities: [40] Power Management version 2
  Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit-
  Address: 00000000 Data: 0000
 Capabilities: [60] Express (v1) Legacy Endpoint, MSI 00
  DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
   ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
  DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
   RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop-
   MaxPayload 128 bytes, MaxReadReq 512 bytes
  DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
  LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <512ns, L1 <64us
   ClockPM- Surprise- LLActRep- BwNot-
  LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
   ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
 Capabilities: [90] MSI-X: Enable- Count=1 Masked-
  Vector table: BAR=0 offset=00000000
  PBA: BAR=0 offset=00000000
 Capabilities: [100 v1] Advanced Error Reporting
  UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol-
  UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
  UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
  CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
  AERCap: First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
 Capabilities: [140 v1] Virtual Channel
  Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
  Arb: Fixed- WRR32- WRR64- WRR128-
  Ctrl: ArbSelect=Fixed
  Status: InProgress-
  VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
   Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
   Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
   Status: NegoPending- InProgress-
 Kernel driver in use: ath5k
 Kernel modules: ath5k
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-18-generic.
ApportVersion: 2.0.1-0ubuntu17.6
Architecture: i386
ArecordDevices:
 **** List of CAPTURE Hardware Devices ****
 card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: fairy 1681 F.... pulseaudio
CRDA: Error: [Errno 2] No such file or directory
Card0.Amixer.info:
 Card hw:0 'Intel'/'HDA Intel at 0x94700000 irq 45'
   Mixer name : 'Intel Cantiga HDMI'
   Components : 'HDA:14f15051,103c360b,00100000 HDA:80862802,80860101,00100000'
   Controls : 24
   Simple ctrls : 8
DistroRelease: Ubuntu 12.04
HibernationDevice: RESUME=UUID=3a85c667-fedd-4c43-abbf-b8a83f35d544
InstallationMedia: Ubuntu 12.04.4 LTS "Precise Pangolin" - Release i386 (20140204)
MachineType: Hewlett-Packard Compaq Presario CQ70 Notebook PC
MarkForUpload: True
Package: linux (not installed)
ProcEnviron:
 TERM=xterm
 PATH=(custom, no user)
 LANG=en_US.UTF-8
 SHELL=/bin/bash
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-18-generic root=UUID=f4f167c6-249f-4d51-8c8f-0a4d9bc78a48 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.11.0-18.32~precise1-generic 3.11.10.4
RelatedPackageVersions:
 linux-restricted-modules-3.11.0-18-generic N/A
 linux-backports-modules-3.11.0-18-generic N/A
 linux-firmware 1.79.10
RfKill:
 0: phy0: Wireless LAN
  Soft blocked: no
  Hard blocked: no
Tags: precise running-unity
Uname: Linux 3.11.0-18-generic i686
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
dmi.bios.date: 10/01/2008
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.26
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 360C
dmi.board.vendor: Wistron
dmi.board.version: 09.45
dmi.chassis.asset.tag: Chassis Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: Wistron
dmi.chassis.version: Chassis Version
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.26:bd10/01/2008:svnHewlett-Packard:pnCompaqPresarioCQ70NotebookPC:pvrF.26:rvnWistron:rn360C:rvr09.45:cvnWistron:ct10:cvrChassisVersion:
dmi.product.name: Compaq Presario CQ70 Notebook PC
dmi.product.version: F.26
dmi.sys.vendor: Hewlett-Packard
---
AlsaVersion: Advanced Linux Sound Architecture Driver Version k3.11.0-19-generic.
ApportVersion: 2.0.1-0ubuntu17.6
Architecture: i386
ArecordDevices:
 **** List of CAPTURE Hardware Devices ****
 card 0: Intel [HDA Intel], device 0: CONEXANT Analog [CONEXANT Analog]
   Subdevices: 1/1
   Subdevice #0: subdevice #0
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: fairy 3958 F.... pulseaudio
CRDA: Error: [Errno 2] Aucun fichier ou dossier de ce type
Card0.Amixer.info:
 Card hw:0 'Intel'/'HDA Intel at 0x94700000 irq 45'
   Mixer name : 'Intel Cantiga HDMI'
   Components : 'HDA:14f15051,103c360b,00100000 HDA:80862802,80860101,00100000'
   Controls : 24
   Simple ctrls : 8
DistroRelease: Ubuntu 12.04
HibernationDevice: RESUME=UUID=499aa89b-1419-4a49-9ff1-8fb8fffc8473
InstallationMedia: Ubuntu 12.04.4 LTS "Precise Pangolin" - Release i386 (20140204)
MachineType: Hewlett-Packard Compaq Presario CQ70 Notebook PC
MarkForUpload: True
Package: linux (not installed)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-19-generic root=UUID=4e58b84d-953f-429e-ab0f-12145a988484 ro quiet splash i915.modeset=1 acpi_osi=Linux video.use_native_backlight=1
ProcVersionSignature: Ubuntu 3.11.0-19.33~precise1-generic 3.11.10.5
RelatedPackageVersions:
 linux-restricted-modules-3.11.0-19-generic N/A
 linux-backports-modules-3.11.0-19-generic N/A
 linux-firmware 1.79.11
RfKill:
 0: phy0: Wireless LAN
  Soft blocked: no
  Hard blocked: no
Tags: precise running-unity
Uname: Linux 3.11.0-19-generic i686
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo
WifiSyslog:
 Apr 14 10:59:12 tales kernel: [ 516.628856] sd 0:0:0:0: [sdb] Test WP failed, assume Write Enabled
 Apr 14 10:59:12 tales kernel: [ 516.631216] sd 0:0:0:0: [sdb] Asking for cache data failed
 Apr 14 10:59:12 tales kernel: [ 516.631220] sd 0:0:0:0: [sdb] Assuming drive cache: write through
 Apr 14 10:59:35 tales kernel: [ 540.008364] perf samples too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
dmi.bios.date: 10/01/2008
dmi.bios.vendor: Hewlett-Packard
dmi.bios.version: F.26
dmi.board.asset.tag: Base Board Asset Tag
dmi.board.name: 360C
dmi.board.vendor: Wistron
dmi.board.version: 09.45
dmi.chassis.asset.tag: Chassis Asset Tag
dmi.chassis.type: 10
dmi.chassis.vendor: Wistron
dmi.chassis.version: Chassis Version
dmi.modalias: dmi:bvnHewlett-Packard:bvrF.26:bd10/01/2008:svnHewlett-Packard:pnCompaqPresarioCQ70NotebookPC:pvrF.26:rvnWistron:rn360C:rvr09.45:cvnWistron:ct10:cvrChassisVersion:
dmi.product.name: Compaq Presario CQ70 Notebook PC
dmi.product.version: F.26
dmi.sys.vendor: Hewlett-Packard

[Brad Figg (brad-figg)]

This bug is missing log files that will aid in diagnosing the problem. From a terminal window please run:

apport-collect 1296263

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable to run this command, please add a comment stating that fact and change the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the Ubuntu Kernel Team.

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

Precise crashed again in a way I've never seen before. Did before crashing:
ALT+CTRL+F1
sudo service service lightdm stop
sudo X -configure
sudo Xorg -configure
sudo cp ~/xorg.conf.new /etc/X11/xorg.conf
sudo service lightdm start

Said Compiz crashed. Couldn't send error because I wanted to get out.
Then noticed display was on internal screen size, tryed to put it back to external monitor screen but did not work, not even when starting gnome-control-center with sudo. PS: After installing, had let display on boths screens and before going in lightdm, display was good size in external monitor.

Then I reboot, then black screen.

Never had that before. Before had only black screen and no display error.

On Lucid live CD, installing Lucid to see if it will crashes also.

[Del Socorro Françoise (waterreedshimmer)]

As I had said this one bug has got nothing to do with all other time Precise screen went black.

I did not install neither re-install neither re-configure nothing, I just did as I said up. I think PC was going to change the way of viewing power supply because in first reboot I could press button ON. But then I did not have time. So I stopped electricity. But then I said to myself, no, better reboot. So when I turned on electricity, no button to press again. And then white screen then black screen on external monitor, so not same problem at all then first.

It is the second log package I send you and it illustrates comments just up.

Thank you.

[Del Socorro Françoise (waterreedshimmer)]

I went back to Lucid but couldn't stay on because no more supported. Furthermore I installed lightdm on it as explained on author's blog, and after rebooting xorg finished as before last Precise: white mouse on black screen.

Not touching lightdm anymore since not compatible with no Ubuntu.

Buttons ON/OFF did work well, but did not tryed lshw although I have log files if you want (except for xorg wich wasn't generated).

Now on Precise ON/OFF buttons do not work. Opened PC, it entered without the BIOS "black" waiting screen directely inside Ubuntu. Very weird not to have to wait neither to press any button, and yet it was no electricity before. (I opened laptop and pressed button, but while I pressed saw was already in Ubuntu so had no need to press whatsoever and button did not do anything at start). In this Precise I had choosen password to enter at beginning, not in last Precises.

Going to try passing into Trusty to see if more stable then Precise in what concern buttons. Although have read Trusty is still a beta version but not for long, 3days.

[Del Socorro Françoise (waterreedshimmer)]

Finally I'm staying on Precise.

I think choosing option to ask password at beginning, before entering in Ubuntu did the trick.

Now buttons are working fine although now we pass from Edid Check Sum to Ubuntu login Screen without BIOS waiting screen. ON/OFF works. Electricity does not grab ON/OFF attributes no more. Going to see if SLEEP (sceen saver) works ?

[Del Socorro Françoise (waterreedshimmer)]

Yes SUSPEND (= sleep) button and screensavers does work fine now.

I think it messed everything up because it wanted to go fast into Ubuntu so it did not watch if I was putting electricity on or button on. But with a password for 1st login, password do stop this mess, and buttons and electricity don't have other option then working fine. (my explanation for black screen)

I won't touch xorg neither lightdm although problem did exist before me touching them, that's way I had touched them.

Hope no black screen further.

Thank you.

[Del Socorro Françoise (waterreedshimmer)]

Black screen again on Precise.

My external screen is black, only my laptop screen wich is broken have light on it although it had been disabled.

No .conf file at all in /etc/X11

[Del Socorro Françoise (waterreedshimmer)]

Have copied from Nautilus all of the .conf from previous Precise. Will send to you later. A lot of errors while copying because duplicate or link error.

Is thinking about installing again PPA glasen to have Intel driver on like some years ago.

[Del Socorro Françoise (waterreedshimmer)]

(I won't post it but I have it.)

Right now I am testing everything. Really everything:
On my blog: http://memubuntu.wordpress.com/2014/04/01/intel-black-screen-old-laptop/

Related to this subject is (but there are much more errors wich could do the black screen):
"
Batterie/énergie: Ne pas mettre en veille si inactif sur batterie ni quand le câble est branché.
Lorsque l'écran est fermé, ne rien faire.
Ne jamais afficher le statut de la batterie.
Luminosité: augmenter (l'option ne reste pas).
Eteindre l'écran si inactif depuis 10 min.
Verrouiller l'écran après 30min.

On va essayer celui-là:
sudo apt-get install gconf-editor
sudo gconf-editor
> apps > backlight (il n'y a pas)
brightness_ac *Sur courant alternatif, valeurs de 0 à 100.
brightness_dim_battery *Sur batterie, valeurs de 0 à 100.
idle_brightness *Lorsque inactif, généralement 30.

ls /sys/class/backlight/acpi_video0/
actual_brightness brightness max_brightness subsystem uevent
bl_power device power type

cat /sys/class/backlight/acpi_video0/actual_brightness
0
cat /sys/class/backlight/acpi_video0/brightness
0
cat /sys/class/backlight/acpi_video0/max_brightness
10
cat /sys/class/backlight/acpi_video0/bl_power
0
cat /sys/class/backlight/acpi_video0/type
firmware

sudo nano /sys/class/backlight/acpi_video0/brightness
9

(this last one is important for it will change all above)

Rem: Ces suggestions sont là: https://wiki.archlinux.org/index.php/backlight

Ah, luminosité et verrouillage ça a changé.

Ps: pas toucher à bl_power, où apparemment backlight on c'est 0 et off c'est 1.

ls /sys/class/backlight/
acpi_video0

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option "NoAccel" # [<bool>]
        Option "AccelMethod" "sna"
        Option "Backlight" "acpi_video0"
        #Option "DRI" # <str>
    Identifier "Card0"
    Driver "intel"
    BusID "PCI:0:2:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
        ### <percent>: "<f>%"
        ### [arg]: arg optional
        #Option "NoAccel" # [<bool>]
        Option "AccelMethod" "sna"
        Option "Backlight" "acpi_video0"
        #Option "DRI" # <str>
    Identifier "Card1"
    Driver "intel"
    BusID "PCI:0:2:1"
EndSection

Attention c'est mon module, le votre peut être un autre.
"

[Del Socorro Françoise (waterreedshimmer)]

Hello, yes I had put back battery that I had taken out 3years ago.

But each time, from 10 last times, I turn computer on, 1st time it turns on: black screen, 2nd time I turn it on: it works but sometimes with /tmp error (The disk drive for /tmp is not ready). So perhaps my problem could be PC dying ?

All I did till now is in my blog: intel ppa glasen + a lot of changing. http://memubuntu.wordpress.com/2014/04/01/intel-black-screen-old-laptop/

............ I forgot to install or xserver-xorg-video-intel-lts-quantal or xserver-xorg-video-intel from Glasen PPA. I thought installing the PPA was enough. And I'll uninstall xserver-xorg-video-intel-lts-saucy.

I have power manager: gnome-power-manager 3.4.0-0ubuntu1.1 , t

I'll install xserver-xorg-video-intel-lts-quantal although I think xserver-xorg-video-intel is more compatible, but Precise is definitely -lts.

[Del Socorro Françoise (waterreedshimmer)]

Today black screen but could connect: touched all the echap F1-F12, everything, and CTRL+everything and Fn+everything and ALT+everything and Windows button+everything, then typed ENTER and I logged in from black screen into Precise !!!

So I can send you more info, since, my black screen doesn't speak and since I just had it !!!!!!!!!

There you can analyse it and tell me why Ubuntu stopped? Right now my install is equal to my blog's with exterior intel Glasen driver for it to work. Was it Ubuntu or material ? http://memubuntu.wordpress.com/2014/04/05/intel-black-screen-old-laptop-version-2-precise/

apport-collect 1296263

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Del Socorro Françoise (waterreedshimmer)]

apport information

[Launchpad Janitor (janitor)]

[Expired for linux (Ubuntu) because there has been no activity for 60 days.]