Comment 32 for bug 1290110

I'm not sure if this is related to this bug but since Kernel 3.13 my fan speed is far to high and noisy as soon as the system is booting up ... I'm using Fedora 20. With Kernel 3.12.X everything was fine instead and fan speed was on a acceptable level ...

[ant@fedorant ~]$ sensors
nouveau-pci-0100
Adapter: PCI adapter
fan1: 6693 RPM
temp1: +69.0°C (high = +95.0°C, hyst = +3.0°C)
                       (crit = +105.0°C, hyst = +5.0°C)
                       (emerg = +135.0°C, hyst = +5.0°C)

coretemp-isa-0000
Adapter: ISA adapter
Core 0: +52.0°C (high = +83.0°C, crit = +99.0°C)
Core 1: +50.0°C (high = +83.0°C, crit = +99.0°C)
Core 2: +52.0°C (high = +83.0°C, crit = +99.0°C)
Core 3: +50.0°C (high = +83.0°C, crit = +99.0°C)

it8720-isa-0a10
Adapter: ISA adapter
in0: +0.86 V (min = +0.00 V, max = +4.08 V) ALARM
in1: +3.04 V (min = +0.00 V, max = +4.08 V) ALARM
in2: +3.33 V (min = +0.00 V, max = +4.08 V) ALARM
+5V: +3.04 V (min = +0.00 V, max = +4.08 V) ALARM
in4: +2.94 V (min = +0.00 V, max = +4.08 V) ALARM
in5: +2.16 V (min = +0.00 V, max = +4.08 V) ALARM
in6: +2.16 V (min = +0.00 V, max = +4.08 V) ALARM
5VSB: +2.96 V (min = +0.00 V, max = +4.08 V) ALARM
Vbat: +2.99 V
fan1: 838 RPM (min = 0 RPM)
fan2: 949 RPM (min = 0 RPM)
temp1: +127.0°C (low = -1.0°C, high = +127.0°C) ALARM sensor = thermal diode
temp2: +22.0°C (low = -1.0°C, high = +127.0°C) ALARM sensor = thermistor
temp3: -47.0°C (low = -1.0°C, high = +127.0°C) sensor = Intel PECI
cpu0_vid: +0.000 V
intrusion0: ALARM

Any ideas?