Comment 10 for bug 1269777

####################################################################

Thu, 16 Jan 2014 13:18:45 +0100
- installed linux-image-generic -> 3.13.0-3-generic
- BIOS: switched AHCI, and pci/pcie power management on
- Reboot with new kernel
- no tlp yet!

Thu, 16 Jan 2014 13:28:13 +0100
Doing a supend/resume cylce ...

After some seconds:
System is going to slow down a little bit and shows the following messages

dmesg | grep ata1
Jan 16 13:22:18 madagaskar kernel: [ 3053.312643] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Jan 16 13:22:18 madagaskar kernel: [ 3053.313348] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Jan 16 13:22:18 madagaskar kernel: [ 3053.313350] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Jan 16 13:22:18 madagaskar kernel: [ 3053.313352] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
Jan 16 13:22:18 madagaskar kernel: [ 3053.313599] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
Jan 16 13:22:18 madagaskar kernel: [ 3053.473847] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
Jan 16 13:22:18 madagaskar kernel: [ 3053.473853] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
Jan 16 13:22:18 madagaskar kernel: [ 3053.473855] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out

>> Jan 16 13:22:18 madagaskar kernel: [ 3053.474168] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1

Jan 16 13:22:18 madagaskar kernel: [ 3053.474251] ata1.00: configured for UDMA/133

####################################################################
Thu, 16 Jan 2014 14:41:29 +0100

Hard resetting link and readonly filesystem

dmesg | egrep "ata|scsi|BOOT" see attached picture

####################################################################

Rebootig with BIOS Mode Standard and Kernel 3.13.0-3-generic.