Comment 0 for bug 1125136

I have an Astrotek USB 3.0 internal card reader in my new computer, plugged into the USB3 header on the mainboard. The reader is apparently controlled by the Genesys gl3220 chip. It has two LEDs on the front: one red to indicate power, the other green to indicate card access/read/write. It also has a USB3 port on the front, which seems to work fine with USB sticks.

I have a 16GB SD card from my camera. When I put it in the SD slot, I would expect the card to be detected with the option given to open it in Nautilus etc. Instead, the green light flashes on and off repeatedly. dmesg reports a series of messages related to xHCI followed by "Unhandled error code". I will attach an excerpt from dmesg from this incident, which was reliably repeatable.

I have tried some different BIOS settings for the USB system:
- Firstly I changed xHCI from "Smart Auto" to "Enabled", logged in, then tested again with an old 256MB SD card. This was mounted automatically but when I tried to create a folder on the card I received a dialogue box reporting an input/output error. Dmesg reported similar xHCI errors as when I tried the 16GB card. I began to file a bug report, and part way through was dumped to a text console with a kernel panic message (which appeared to stem from usb_storage). As I have no other USB devices plugged in I presume this is again from the card reader.

- Secondly I toggled the ASUS Bios "EHCI handoff", which I think was "disabled" by default and I set it to "enabled". With this set I got a kernel panic shortly after logging in, but without inserting a card in the card reader at all. I have screenshots of these kernel panics if they are of use.

I am writing this bug report having rebooted the computer, reset the USB BIOS settings and restarted and the card reader's red power light is not on at all, hence the ubuntu-bug-generated output may not show the card reader.

- Oliver

ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: linux-image-generic 3.5.0.23.29
ProcVersionSignature: Ubuntu 3.5.0-23.35-generic 3.5.7.2
Uname: Linux 3.5.0-23-generic x86_64
ApportVersion: 2.6.1-0ubuntu10
Architecture: amd64
AudioDevicesInUse:
 USER PID ACCESS COMMAND
 /dev/snd/controlC0: oliver 1942 F.... pulseaudio
CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found.
CurrentDmesg: [ 5.927548] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Date: Thu Feb 14 22:37:43 2013
HibernationDevice: RESUME=UUID=d9056455-e6ff-497b-acd2-908669c21bc8
InstallationDate: Installed on 2013-02-06 (7 days ago)
InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5)
IwConfig:
 eth0 no wireless extensions.

 lo no wireless extensions.
MachineType: System manufacturer System Product Name
MarkForUpload: True
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.5.0-23-generic root=/dev/mapper/ubuntu-root ro quiet splash vt.handoff=7
RelatedPackageVersions:
 linux-restricted-modules-3.5.0-23-generic N/A
 linux-backports-modules-3.5.0-23-generic N/A
 linux-firmware 1.95
RfKill:

SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 12/10/2012
dmi.bios.vendor: American Megatrends Inc.
dmi.bios.version: 1005
dmi.board.asset.tag: To be filled by O.E.M.
dmi.board.name: P8H77-M PRO
dmi.board.vendor: ASUSTeK COMPUTER INC.
dmi.board.version: Rev X.0x
dmi.chassis.asset.tag: Asset-1234567890
dmi.chassis.type: 3
dmi.chassis.vendor: Chassis Manufacture
dmi.chassis.version: Chassis Version
dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1005:bd12/10/2012:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnP8H77-MPRO:rvrRevX.0x:cvnChassisManufacture:ct3:cvrChassisVersion:
dmi.product.name: System Product Name
dmi.product.version: System Version
dmi.sys.vendor: System manufacturer