(In reply to comment #14)
> (In reply to comment #13)
> > (In reply to comment #12)
> > > Created attachment 72641 [details]
> > > dmesg data for drm.debug=0xe
> >
> > Just to check: Is that dmesg from 3.8-rc2?
>
> BOOT_IMAGE=/vmlinuz-3.8.0-030800rc2-generic in the dmesg suggests so... but
> there's no FDI link train errors and I don't spot another monitor there
> either.
>
> Are you using HDMI for both monitors? Or something else? Any adapters in
> between?
It is the 3.8-rc2 kernel which I linked to earlier, yes.
I think the drm.debug is perhaps causing them to either not get logged, or there is just too much information from drm.debug, and they end up not appearing. The output of running 'dmesg' and looking at /var/log/dmesg are not consistent.
I am not using HDMI for any monitors. The board doesn't even have HDMI. It has 2 DVI ports, and one Displayport. I'm using DVI for both monitors. No adapters for anything. Monitors are both Samsung 2343BWX. When trying to configure the second display to a working resolution (1280x800), then back to the native resolution, and finally back to mirroring, I get this from "dmesg|grep fdi" :
(In reply to comment #14) /vmlinuz- 3.8.0-030800rc2 -generic in the dmesg suggests so... but
> (In reply to comment #13)
> > (In reply to comment #12)
> > > Created attachment 72641 [details]
> > > dmesg data for drm.debug=0xe
> >
> > Just to check: Is that dmesg from 3.8-rc2?
>
> BOOT_IMAGE=
> there's no FDI link train errors and I don't spot another monitor there
> either.
>
> Are you using HDMI for both monitors? Or something else? Any adapters in
> between?
It is the 3.8-rc2 kernel which I linked to earlier, yes.
I think the drm.debug is perhaps causing them to either not get logged, or there is just too much information from drm.debug, and they end up not appearing. The output of running 'dmesg' and looking at /var/log/dmesg are not consistent.
I am not using HDMI for any monitors. The board doesn't even have HDMI. It has 2 DVI ports, and one Displayport. I'm using DVI for both monitors. No adapters for anything. Monitors are both Samsung 2343BWX. When trying to configure the second display to a working resolution (1280x800), then back to the native resolution, and finally back to mirroring, I get this from "dmesg|grep fdi" :
[85024.350500] [drm:ironlake_ check_fdi_ lanes], checking fdi config on pipe 1, lanes 1 manual_ fdi_link_ train], FDI_RX_IIR before link train 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x100 manual_ fdi_link_ train], FDI train 1 done, level 0. manual_ fdi_link_ train], FDI_RX_IIR 0x600 manual_ fdi_link_ train], FDI train 2 done, level 0. manual_ fdi_link_ train], FDI train done. check_fdi_ lanes], checking fdi config on pipe 1, lanes 2 manual_ fdi_link_ train], FDI_RX_IIR before link train 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train] *ERROR* FDI train 1 fail! manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train] *ERROR* FDI train 2 fail! manual_ fdi_link_ train], FDI train done. modeset_ global_ resources] , disabling fdi C rx check_fdi_ lanes], checking fdi config on pipe 1, lanes 2 enable_ fdi_bc_ bifurcation] , enabling fdi C rx manual_ fdi_link_ train], FDI_RX_IIR before link train 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train] *ERROR* FDI train 1 fail! manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train], FDI_RX_IIR 0x0 manual_ fdi_link_ train] *ERROR* FDI train 2 fail! manual_ fdi_link_ train], FDI train done.
[85024.573818] [drm:ivb_
[85024.574471] [drm:ivb_
[85024.574474] [drm:ivb_
[85024.575126] [drm:ivb_
[85024.575129] [drm:ivb_
[85024.575131] [drm:ivb_
[85072.643845] [drm:ironlake_
[85072.867168] [drm:ivb_
[85072.867821] [drm:ivb_
[85072.868322] [drm:ivb_
[85072.868824] [drm:ivb_
[85072.869325] [drm:ivb_
[85072.869329] [drm:ivb_
[85072.869982] [drm:ivb_
[85072.870481] [drm:ivb_
[85072.870984] [drm:ivb_
[85072.871484] [drm:ivb_
[85072.871486] [drm:ivb_
[85072.871487] [drm:ivb_
[85089.743424] [drm:ivb_
[85089.745990] [drm:ironlake_
[85089.745995] [drm:cpt_
[85089.911413] [drm:ivb_
[85089.912066] [drm:ivb_
[85089.912567] [drm:ivb_
[85089.913068] [drm:ivb_
[85089.913569] [drm:ivb_
[85089.913573] [drm:ivb_
[85089.914225] [drm:ivb_
[85089.914724] [drm:ivb_
[85089.915230] [drm:ivb_
[85089.915730] [drm:ivb_
[85089.915732] [drm:ivb_
[85089.915733] [drm:ivb_