I installed on a 4 GB SD card following instructions here:
http://pandaboard.org/content/resources/getting-started http://omappedia.org/wiki/Ubuntu_Pre-built_Binaries_Guide http://cdimage.ubuntu.com/ubuntu-netbook/ports/releases/10.10/release/ubuntu-netbook-10.10-preinstalled-netbook-armel+omap4.img.gz
Then I did apt-get update / apt-get upgrade, reboot, then I edited /boot/boot.script to remove GUI and add memory:
# cat /proc/version_signature Ubuntu 2.6.35-903.19-omap4 2.6.35.3 # cat /boot/boot.script fatload mmc 0:1 0x80000000 uImage fatload mmc 0:1 0x81600000 uInitrd setenv bootargs quiet text ro elevator=noop vram=32M mem=768M root=UUID=b5d2dfb1-270c-4966-abe6-dfe7a2a17efd fixrtc smsc95xx.macaddr=32:57:F8:93:E1:CD bootm 0x80000000 0x81600000 # cat /etc/rc.local
sysctl -w vm.overcommit_memory=2 echo 0 > /proc/sys/kernel/randomize_va_space mount -t nfs pc2:/mnt/s2000c/nfs/44/home /home exit 0
Two openvpn running, /home/ over NFS as above I installed nfs-kernel-server.
With the original mem= mem= setting with swap activated I got backtraces by just doing:
cd /home/user svn co svn://gcc.gnu.org/svn/gcc/trunk
(this will use 1.3 Gbyte of space)
With no swap I don't get any backtraces but user space command start getting NULL out of malloc.
If it's easier for you just send me your ssh public key I will install it on my pandaboard on root.
I installed on a 4 GB SD card following instructions here:
http:// pandaboard. org/content/ resources/ getting- started omappedia. org/wiki/ Ubuntu_ Pre-built_ Binaries_ Guide cdimage. ubuntu. com/ubuntu- netbook/ ports/releases/ 10.10/release/ ubuntu- netbook- 10.10-preinstal led-netbook- armel+omap4. img.gz
http://
http://
Then I did apt-get update / apt-get upgrade, reboot, then I edited /boot/boot.script to remove GUI and add memory:
# cat /proc/version_ signature b5d2dfb1- 270c-4966- abe6-dfe7a2a17e fd fixrtc smsc95xx. macaddr= 32:57:F8: 93:E1:CD
Ubuntu 2.6.35-903.19-omap4 2.6.35.3
# cat /boot/boot.script
fatload mmc 0:1 0x80000000 uImage
fatload mmc 0:1 0x81600000 uInitrd
setenv bootargs quiet text ro elevator=noop vram=32M mem=768M root=UUID=
bootm 0x80000000 0x81600000
# cat /etc/rc.local
sysctl -w vm.overcommit_ memory= 2 kernel/ randomize_ va_space s2000c/ nfs/44/ home /home
echo 0 > /proc/sys/
mount -t nfs pc2:/mnt/
exit 0
Two openvpn running, /home/ over NFS as above I installed nfs-kernel-server.
With the original mem= mem= setting with swap activated I got backtraces by just doing:
cd /home/user gnu.org/ svn/gcc/ trunk
svn co svn://gcc.
(this will use 1.3 Gbyte of space)
With no swap I don't get any backtraces but user space command start getting NULL out of malloc.
If it's easier for you just send me your ssh public key I will install it on my pandaboard on root.