Intel HDA No sound after Standby
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Fix Released
|
Medium
|
Unassigned | ||
linux-source-2.6.20 (Ubuntu) |
Won't Fix
|
Low
|
Unassigned | ||
linux-source-2.6.22 (Ubuntu) |
Won't Fix
|
Medium
|
Unassigned |
Bug Description
Binary package hint: linux-image-
Every time the computer exits standy, one of following happens:
* no sound
* sound is garbled/loops strangely
My current kernel string is:
-------
Linux Papaleguas-Duo 2.6.20-3-lowlatency #2 SMP PREEMPT Tue Dec 26 06:59:08 UTC 2006 i686 GNU/Linux
-------
(yes, i know the kernel string says lowlatency kernel. This bug happens in both lowlatency and generic packages)
I wasn't able to remove and reload the module, since i got a 'FATAL: Module snd_xxxxxxx is in use'.
I have running the following snd modules loaded:
-------
snd 55300 12
snd_hda_
snd_hda_codec 164480 1 snd_hda_intel
snd_hda_intel 21400 1
snd_mixer_oss 17920 1 snd_pcm_oss
snd_page_alloc 10888 2 snd_hda_
snd_pcm 80388 3 snd_hda_
snd_pcm_oss 45184 0
snd_rawmidi 25856 1 snd_seq_midi
snd_seq 53616 6
snd_seq_
snd_seq_device 9100 5
snd_seq_
snd_seq_dummy 4740 0
snd_seq_midi 9600 0
snd_seq_midi_event 8448 2 snd_seq_
snd_seq_oss 33792 0
snd_timer 24196 2 snd_pcm,snd_seq
soundcore 9440 1 snd
-------
The detailed lspci output:
-------
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: Sony Corporation Unknown device [104d:81ef]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d2300000 (64-bit, non-prefetchable) [size=16K]
-------
The dmesg filtered output regarding this device is:
-------
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[ 25.861000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[33504.727000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[33799.751000] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
[33799.751000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[33799.751000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->IRQ 23
[33799.751000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
-------
The full dmesg log is:
-------
[ 0.000000] Linux version 2.6.20-3-lowlatency (root@rothera) (gcc version 4.1.2 20061212 (prerelease) (Ubuntu 4.1.1-21ubuntu3)) #2 SMP PREEMPT Tue Dec 26 06:59:08 UTC 2006 (Ubuntu Unofficial)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000c2000 size: 000000000000e000 end: 00000000000d0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000003fd90000 end: 000000003fe90000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003fe90000 size: 000000000000a000 end: 000000003fe9a000 type: 3
[ 0.000000] copy_e820_map() start: 000000003fe9a000 size: 0000000000066000 end: 000000003ff00000 type: 4
[ 0.000000] copy_e820_map() start: 000000003ff00000 size: 0000000000100000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
[ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000c2000 - 00000000000d0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fe90000 (usable)
[ 0.000000] BIOS-e820: 000000003fe90000 - 000000003fe9a000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003fe9a000 - 000000003ff00000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f7330
[ 0.000000] Entering add_active_range(0, 0, 261776) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261776
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261776
[ 0.000000] On node 0 totalpages: 261776
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32147 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x000f7260
[ 0.000000] ACPI: RSDT (v001 SONY J3 0x20060817 PTL 0x00000000) @ 0x3fe931bf
[ 0.000000] ACPI: FADT (v002 SONY J3 0x20060817 PTL 0x0000005a) @ 0x3fe99e10
[ 0.000000] ACPI: MADT (v001 SONY J3 0x20060817 PTL 0x0000005a) @ 0x3fe99e94
[ 0.000000] ACPI: BOOT (v001 SONY J3 0x20060817 PTL 0x00000001) @ 0x3fe99fd8
[ 0.000000] ACPI: MCFG (v001 SONY J3 0x20060817 PTL 0x0000005a) @ 0x3fe99f34
[ 0.000000] ACPI: MADT (v001 SONY J3 0x20060817 PTL 0x00000000) @ 0x3fe99f70
[ 0.000000] ACPI: SSDT (v001 SONY J3 0x20060817 PTL 0x20050228) @ 0x3fe94227
[ 0.000000] ACPI: SSDT (v001 SONY J3 0x20060817 PTL 0x20050228) @ 0x3fe93b8b
[ 0.000000] ACPI: SSDT (v001 SONY J3 0x20060817 PTL 0x20050228) @ 0x3fe93203
[ 0.000000] ACPI: DSDT (v001 SONY J3 0x20060817 PTL 0x20050228) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: 2 duplicate APIC table ignored.
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:15 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
[ 0.000000] Detected 1662.658 MHz processor.
[ 13.283336] Built 1 zonelists. Total pages: 259731
[ 13.283340] Kernel command line: root=/dev/sda1 ro quiet splash
[ 13.283479] mapped APIC to ffffd000 (fee00000)
[ 13.283481] mapped IOAPIC to ffffc000 (fec00000)
[ 13.283484] Enabling fast FPU save and restore... done.
[ 13.283486] Enabling unmasked SIMD FPU exception support... done.
[ 13.283493] Initializing CPU#0
[ 13.283555] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 13.286504] Console: colour VGA+ 80x25
[ 13.286785] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 13.287080] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 13.310259] Memory: 1027464k/1047104k available (1984k kernel code, 19016k reserved, 873k data, 312k init, 129600k highmem)
[ 13.310267] virtual kernel memory layout:
[ 13.310268] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 13.310270] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 13.310271] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 13.310272] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 13.310273] .init : 0xc03d1000 - 0xc041f000 ( 312 kB)
[ 13.310274] .data : 0xc02f0291 - 0xc03ca6d4 ( 873 kB)
[ 13.310275] .text : 0xc0100000 - 0xc02f0291 (1984 kB)
[ 13.310278] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 13.369420] Calibrating delay using timer specific routine.. 3327.53 BogoMIPS (lpj=1663767)
[ 13.369462] Security Framework v1.0.0 initialized
[ 13.369466] SELinux: Disabled at boot.
[ 13.369482] Mount-cache hash table entries: 512
[ 13.369599] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 13.369606] monitor/mwait feature present.
[ 13.369608] using mwait in idle threads.
[ 13.369611] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 13.369614] CPU: L2 cache: 2048K
[ 13.369616] CPU: Physical Processor ID: 0
[ 13.369618] CPU: Processor Core ID: 0
[ 13.369620] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 13.369628] Compat vDSO mapped to ffffe000.
[ 13.369638] Checking 'hlt' instruction... OK.
[ 13.373497] SMP alternatives: switching to UP code
[ 13.373628] ACPI: Core revision 20060707
[ 13.396048] CPU0: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
[ 13.396070] SMP alternatives: switching to SMP code
[ 13.396134] Booting processor 1/1 eip 3000
[ 13.406584] Initializing CPU#1
[ 13.467252] Calibrating delay using timer specific routine.. 3324.55 BogoMIPS (lpj=1662276)
[ 13.467258] CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e39d 00000000 00000001
[ 13.467263] monitor/mwait feature present.
[ 13.467266] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 13.467268] CPU: L2 cache: 2048K
[ 13.467270] CPU: Physical Processor ID: 0
[ 13.467272] CPU: Processor Core ID: 1
[ 13.467273] CPU: After all inits, caps: bfebfbff 20100000 00000000 00003940 0000e39d 00000000 00000001
[ 13.467662] CPU1: Intel(R) Core(TM)2 CPU T5500 @ 1.66GHz stepping 06
[ 13.467683] Total of 2 processors activated (6652.08 BogoMIPS).
[ 13.467881] ENABLING IO-APIC IRQs
[ 13.468072] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 13.579072] checking TSC synchronization across 2 CPUs: passed.
[ 0.001005] Brought up 2 CPUs
[ 0.130088] migration_cost=48
[ 0.130420] NET: Registered protocol family 16
[ 0.130504] EISA bus registered
[ 0.130508] ACPI: bus type pci registered
[ 0.130517] PCI: Using MMCONFIG
[ 0.131378] Setting up standard PCI resources
[ 0.136492] ACPI: Interpreter enabled
[ 0.136494] ACPI: Using IOAPIC for interrupt routing
[ 0.137142] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.137149] PCI: Probing PCI hardware (bus 00)
[ 0.138505] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.138509] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.138772] Boot video device is 0000:01:00.0
[ 0.139711] PCI: Transparent bridge - 0000:00:1e.0
[ 0.139783] PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0b) (try 'pci=assign-
[ 0.139785] Please report the result to linux-kernel to fix this permanently
[ 0.139859] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.147441] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.148172] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.148434] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.148688] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.148945] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.150121] ACPI: PCI Interrupt Routing Table [\_SB_.
[ 0.151137] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.151379] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.151623] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.151865] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.152105] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.152343] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.152581] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 *4 5 6 7 10 12 14 15)
[ 0.152838] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 11 12 14 15)
[ 0.158179] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.158188] pnp: PnP ACPI init
[ 0.161196] pnp: PnP ACPI: found 9 devices
[ 0.161201] PnPBIOS: Disabled by ACPI PNP
[ 0.161252] PCI: Using ACPI for IRQ routing
[ 0.161255] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.161771] PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0
[ 0.161834] PCI: Bridge: 0000:00:01.0
[ 0.161835] IO window: disabled.
[ 0.161839] MEM window: d0000000-d1ffffff
[ 0.161842] PREFETCH window: b0000000-bfffffff
[ 0.161844] PCI: Bridge: 0000:00:1c.0
[ 0.161847] IO window: 2000-2fff
[ 0.161853] MEM window: c8000000-c9ffffff
[ 0.161857] PREFETCH window: c0000000-c1ffffff
[ 0.161862] PCI: Bridge: 0000:00:1c.1
[ 0.161865] IO window: 3000-3fff
[ 0.161870] MEM window: ca000000-cbffffff
[ 0.161874] PREFETCH window: c2000000-c3ffffff
[ 0.161879] PCI: Bridge: 0000:00:1c.2
[ 0.161882] IO window: 4000-4fff
[ 0.161888] MEM window: cc000000-cdffffff
[ 0.161892] PREFETCH window: c4000000-c5ffffff
[ 0.161897] PCI: Bridge: 0000:00:1c.3
[ 0.161900] IO window: 5000-5fff
[ 0.161905] MEM window: ce000000-cfffffff
[ 0.161909] PREFETCH window: c6000000-c7ffffff
[ 0.161921] PCI: Bus 11, cardbus bridge: 0000:0a:03.0
[ 0.161923] IO window: 00006400-000064ff
[ 0.161928] IO window: 00006800-000068ff
[ 0.161933] PREFETCH window: 50000000-53ffffff
[ 0.161937] MEM window: 54000000-57ffffff
[ 0.161942] PCI: Bridge: 0000:00:1e.0
[ 0.161945] IO window: 6000-6fff
[ 0.161950] MEM window: d2000000-d20fffff
[ 0.161954] PREFETCH window: 50000000-53ffffff
[ 0.161967] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.161971] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.161991] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 0.161996] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.162015] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
[ 0.162021] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.162040] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 0.162046] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.162066] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 21 (level, low) -> IRQ 19
[ 0.162071] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.162081] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
[ 0.162086] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.162101] PCI: Enabling device 0000:0a:03.0 (0000 -> 0003)
[ 0.162105] ACPI: PCI Interrupt 0000:0a:03.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.162142] NET: Registered protocol family 2
[ 0.170758] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.170862] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[ 0.171512] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 0.171926] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.171928] TCP reno registered
[ 0.174858] checking if image is initramfs... it is
[ 0.757603] Freeing initrd memory: 6330k freed
[ 0.757798] Simple Boot Flag at 0x36 set to 0x1
[ 0.758260] audit: initializing netlink socket (disabled)
[ 0.758276] audit(116809125
[ 0.758366] highmem bounce pool size: 64 pages
[ 0.758450] VFS: Disk quotas dquot_6.5.1
[ 0.758469] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.758521] io scheduler noop registered
[ 0.758524] io scheduler anticipatory registered
[ 0.758526] io scheduler deadline registered
[ 0.758539] io scheduler cfq registered (default)
[ 0.758786] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 0.758807] assign_
[ 0.758834] Allocate Port Service[
[ 0.758872] Allocate Port Service[
[ 0.758943] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.758992] assign_
[ 0.759027] Allocate Port Service[
[ 0.759060] Allocate Port Service[
[ 0.759094] Allocate Port Service[
[ 0.759202] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.759251] assign_
[ 0.759285] Allocate Port Service[
[ 0.759320] Allocate Port Service[
[ 0.759355] Allocate Port Service[
[ 0.759463] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 0.759511] assign_
[ 0.759546] Allocate Port Service[
[ 0.759581] Allocate Port Service[
[ 0.759613] Allocate Port Service[
[ 0.759729] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 0.759777] assign_
[ 0.759812] Allocate Port Service[
[ 0.759847] Allocate Port Service[
[ 0.759882] Allocate Port Service[
[ 0.760058] isapnp: Scanning for PnP cards...
[ 1.117098] isapnp: No Plug & Play device found
[ 1.138738] Real Time Clock Driver v1.12ac
[ 1.138798] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.139446] mice: PS/2 mouse device common for all mice
[ 1.140014] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.140116] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.140120] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.140371] PNP: PS/2 Controller [PNP0303:
[ 1.144253] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1.148461] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.148465] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.148468] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.148473] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.148475] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.148887] EISA: Probing bus 0 at eisa.0
[ 1.148895] Cannot allocate resource for EISA slot 1
[ 1.148898] Cannot allocate resource for EISA slot 2
[ 1.148900] Cannot allocate resource for EISA slot 3
[ 1.148902] Cannot allocate resource for EISA slot 4
[ 1.148904] Cannot allocate resource for EISA slot 5
[ 1.148906] Cannot allocate resource for EISA slot 6
[ 1.148917] EISA: Detected 0 cards.
[ 1.178965] TCP cubic registered
[ 1.178973] NET: Registered protocol family 1
[ 1.178979] NET: Registered protocol family 8
[ 1.178981] NET: Registered protocol family 20
[ 1.179053] Starting balanced_irq
[ 1.179061] Using IPI No-Shortcut mode
[ 1.179159] ACPI: (supports S0 S3 S4 S5)
[ 1.179364] Freeing unused kernel memory: 312k freed
[ 1.180008] Time: tsc clocksource has been installed.
[ 1.350610] input: AT Translated Set 2 keyboard as /class/input/input0
[ 2.262463] Capability LSM initialized
[ 2.295747] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ SONY] OemTableId [ J3] [20060707]
[ 2.296193] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ SONY] OemTableId [ J3] [20060707]
[ 2.296452] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 2.296456] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.296929] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ SONY] OemTableId [ J3] [20060707]
[ 2.297121] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ SONY] OemTableId [ J3] [20060707]
[ 2.297421] ACPI: CPU1 (power states: C1[C1] C2[C2])
[ 2.297426] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.299167] ACPI Exception (acpi_thermal-
[ 2.480000] ACPI: Thermal Zone [TZ00] (30 C)
[ 2.481000] ACPI Exception (acpi_thermal-
[ 2.482000] Time: acpi_pm clocksource has been installed.
[ 2.482000] ACPI: Thermal Zone [TZ01] (30 C)
[ 2.945000] usbcore: registered new interface driver usbfs
[ 2.945000] usbcore: registered new interface driver hub
[ 2.945000] usbcore: registered new device driver usb
[ 2.945000] USB Universal Host Controller Interface driver v3.0
[ 2.945000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[ 2.945000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 2.945000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 2.946000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.946000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001800
[ 2.946000] usb usb1: configuration #1 chosen from 1 choice
[ 2.946000] hub 1-0:1.0: USB hub found
[ 2.946000] hub 1-0:1.0: 2 ports detected
[ 3.047000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 3.047000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.047000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.047000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 3.047000] uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001820
[ 3.047000] usb usb2: configuration #1 chosen from 1 choice
[ 3.047000] hub 2-0:1.0: USB hub found
[ 3.047000] hub 2-0:1.0: 2 ports detected
[ 3.074000] ieee1394: Initialized config rom entry `ip1394'
[ 3.078000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[ 3.078000] e100: Copyright(c) 1999-2006 Intel Corporation
[ 3.148000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[ 3.148000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.148000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.148000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 3.148000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
[ 3.148000] usb usb3: configuration #1 chosen from 1 choice
[ 3.148000] hub 3-0:1.0: USB hub found
[ 3.148000] hub 3-0:1.0: 2 ports detected
[ 3.249000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[ 3.249000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.249000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.249000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 3.249000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
[ 3.249000] usb usb4: configuration #1 chosen from 1 choice
[ 3.249000] hub 4-0:1.0: USB hub found
[ 3.249000] hub 4-0:1.0: 2 ports detected
[ 3.351000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[ 3.351000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 3.351000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 3.351000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 3.351000] ehci_hcd 0000:00:1d.7: debug port 1
[ 3.351000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 3.351000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd2304000
[ 3.355000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.355000] usb usb5: configuration #1 chosen from 1 choice
[ 3.355000] hub 5-0:1.0: USB hub found
[ 3.355000] hub 5-0:1.0: 8 ports detected
[ 3.356000] SCSI subsystem initialized
[ 3.360000] libata version 2.00 loaded.
[ 3.456000] PCI: Enabling device 0000:0a:08.0 (0000 -> 0003)
[ 3.456000] ACPI: PCI Interrupt 0000:0a:08.0[A] -> GSI 20 (level, low) -> IRQ 21
[ 3.484000] e100: eth0: e100_probe: addr 0xd2005000, irq 21, MAC addr 00:13:A9:47:E6:3F
[ 3.484000] ICH7: IDE controller at PCI slot 0000:00:1f.1
[ 3.484000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
[ 3.484000] ICH7: chipset revision 2
[ 3.484000] ICH7: not 100% native mode: will probe irqs later
[ 3.484000] ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
[ 3.484000] Probing IDE interface ide0...
[ 3.686000] usb 5-8: new high speed USB device using ehci_hcd and address 2
[ 3.828000] usb 5-8: configuration #1 chosen from 1 choice
[ 4.157000] hda: MATSHITADVD-RAM UJ-850S, ATAPI CD/DVD-ROM drive
[ 4.464000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 4.464000] PCI: Enabling device 0000:0a:03.1 (0000 -> 0002)
[ 4.464000] ACPI: PCI Interrupt 0000:0a:03.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.515000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16] MMIO=[d2006000-
[ 4.515000] ata_piix 0000:00:1f.2: version 2.00ac7
[ 4.515000] ata_piix 0000:00:1f.2: MAP [ P0 P2 XX XX ]
[ 4.515000] ata_piix 0000:00:1f.2: invalid MAP value 0
[ 4.666000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 22
[ 4.666000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.666000] ata1: SATA max UDMA/133 cmd 0x18C8 ctl 0x18AE bmdma 0x18B0 irq 22
[ 4.666000] ata2: SATA max UDMA/133 cmd 0x18C0 ctl 0x18AA bmdma 0x18B8 irq 22
[ 4.666000] scsi0 : ata_piix
[ 4.820000] ata1.00: ATA-7, max UDMA/100, 234441648 sectors: LBA48 NCQ (depth 0/32)
[ 4.820000] ata1.00: ata1: dev 0 multi count 16
[ 4.823000] ata1.00: configured for UDMA/100
[ 4.823000] scsi1 : ata_piix
[ 4.985000] ATA: abnormal status 0x7F on port 0x18C7
[ 4.985000] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK1234GS AH00 PQ: 0 ANSI: 5
[ 4.994000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 4.994000] sda: Write Protect is off
[ 4.994000] sda: Mode Sense: 00 3a 00 00
[ 4.994000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.994000] SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
[ 4.994000] sda: Write Protect is off
[ 4.994000] sda: Mode Sense: 00 3a 00 00
[ 4.994000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.994000] sda:<6>hda: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
[ 4.998000] Uniform CD-ROM driver Revision: 3.20
[ 5.029000] sda1 sda2 sda3 sda4
[ 5.041000] sd 0:0:0:0: Attached scsi disk sda
[ 5.045000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.378000] kjournald starting. Commit interval 5 seconds
[ 5.378000] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.772000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0800460302
[ 10.312000] NET: Registered protocol family 10
[ 10.313000] lo: Disabled Privacy Extensions
[ 23.217000] ADDRCONF(
[ 24.118000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 24.120000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 24.257000] Linux agpgart interface v0.101 (c) Dave Jones
[ 24.364000] agpgart: Detected an Intel 945GM Chipset.
[ 24.381000] agpgart: AGP aperture is 256M @ 0x0
[ 24.383000] input: PC Speaker as /class/input/input1
[ 24.393000] iTCO_vendor_
[ 24.426000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[ 24.426000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 24.426000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 24.726000] intel_rng: FWH not detected
[ 24.837000] Yenta: CardBus bridge found at 0000:0a:03.0 [104d:81ef]
[ 24.837000] Yenta: Enabling burst memory read transactions
[ 24.837000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 24.837000] Yenta: Routing CardBus interrupts to PCI
[ 24.837000] Yenta TI: socket 0000:0a:03.0, mfunc 0x01131b22, devctl 0x64
[ 24.845000] ieee80211_crypt: registered algorithm 'NULL'
[ 24.848000] ieee80211: 802.11 data/management
[ 24.848000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <email address hidden>
[ 24.993000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.1.3mp
[ 24.993000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[ 25.070000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
[ 25.070000] Socket status: 30000006
[ 25.070000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to #0e
[ 25.070000] pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
[ 25.070000] cs: IO port probe 0x6000-0x6fff: clean.
[ 25.070000] pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
[ 25.070000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 25.070000] PCI: Enabling device 0000:0a:03.2 (0000 -> 0002)
[ 25.070000] ACPI: PCI Interrupt 0000:0a:03.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 25.071000] ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[ 25.071000] PCI: Setting latency timer of device 0000:06:00.0 to 64
[ 25.071000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 25.198000] input: PS/2 Mouse as /class/input/input2
[ 25.216000] input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
[ 25.400000] nvidia: module license 'NVIDIA' taints kernel.
[ 25.704000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 25.704000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 25.704000] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9746 Fri Dec 15 09:54:45 PST 2006
[ 25.803000] cs: IO port probe 0x100-0x3af: clean.
[ 25.805000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 25.807000] cs: IO port probe 0x820-0x8ff: clean.
[ 25.808000] cs: IO port probe 0xc00-0xcf7: clean.
[ 25.809000] cs: IO port probe 0xa00-0xaff: clean.
[ 25.861000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[ 25.861000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 25.936000] NET: Registered protocol family 17
[ 26.679000] lp: driver loaded but no devices found
[ 26.731000] fuse init (API version 7.8)
[ 26.750000] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 22
[ 26.945000] Adding 1542232k swap on /dev/sda2. Priority:-1 extents:1 across:1542232k
[ 27.273000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[ 27.274000] EXT3 FS on sda1, internal journal
[ 27.727000] JFS: nTxBlock = 8080, nTxLock = 64646
[ 30.318000] IA-32 Microcode Update Driver: v1.14a <email address hidden>
[ 31.325000] ACPI: ACPI Dock Station Driver
[ 31.365000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 31.406000] toshiba_acpi: Unknown parameter `hotkeys_over_acpi'
[ 31.459000] Using specific hotkey driver
[ 31.482000] ibm_acpi: ec object not found
[ 31.510000] input: Lid Switch as /class/input/input4
[ 31.510000] ACPI: Lid Switch [LID0]
[ 31.511000] input: Power Button (CM) as /class/input/input5
[ 31.511000] ACPI: Power Button (CM) [PWRB]
[ 31.622000] ACPI: Battery Slot [BAT0] (battery present)
[ 31.675000] ACPI: AC Adapter [ADP1] (on-line)
[ 39.284000] sonypi: Sony Programmable I/O Controller Driver v1.26.
[ 39.284000] sonypi: detected type3 model, verbose = 0, fnkeyinit = off, camera = off, compat = off, mask = 0xffffffff, useinput = on, acpi = on
[ 39.284000] sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
[ 39.284000] sonypi: device allocated minor is 63
[ 39.284000] input: Sony Vaio Jogdial as /class/input/input6
[ 39.284000] input: Sony Vaio Keys as /class/input/input7
[ 39.404000] sonypi command failed at drivers/
[ 39.444000] sonypi command failed at drivers/
[ 39.484000] sonypi command failed at drivers/
[ 39.523000] sonypi command failed at drivers/
[ 47.045000] ADDRCONF(
[ 48.772000] Bluetooth: Core ver 2.11
[ 48.772000] NET: Registered protocol family 31
[ 48.772000] Bluetooth: HCI device and connection manager initialized
[ 48.773000] Bluetooth: HCI socket layer initialized
[ 49.009000] Bluetooth: L2CAP ver 2.8
[ 49.009000] Bluetooth: L2CAP socket layer initialized
[ 49.015000] Bluetooth: HIDP (Human Interface Emulation) ver 1.1
[ 49.348000] Bluetooth: RFCOMM socket layer initialized
[ 49.348000] Bluetooth: RFCOMM TTY layer initialized
[ 49.348000] Bluetooth: RFCOMM ver 1.8
[ 49.549000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 49.549000] apm: disabled - APM is not SMP safe.
[ 104.508000] usb 1-2: new low speed USB device using uhci_hcd and address 2
[ 104.673000] usb 1-2: configuration #1 chosen from 1 choice
[ 104.810000] usbcore: registered new interface driver hiddev
[ 104.823000] input: Logitech Optical USB Mouse as /class/input/input8
[ 104.823000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.0-2
[ 104.823000] usbcore: registered new interface driver usbhid
[ 104.823000] drivers/
[ 291.874000] ADDRCONF(
[ 291.937000] ieee80211_crypt: registered algorithm 'TKIP'
[ 302.005000] eth1: no IPv6 routers present
[ 372.505000] ADDRCONF(
[ 375.001000] ADDRCONF(
[ 385.949000] eth1: no IPv6 routers present
[ 446.463000] ADDRCONF(
[ 449.039000] ADDRCONF(
[ 459.349000] eth1: no IPv6 routers present
[ 567.566000] ADDRCONF(
[ 570.104000] ADDRCONF(
[ 580.888000] eth1: no IPv6 routers present
[ 653.711000] ADDRCONF(
[ 656.140000] ADDRCONF(
[ 666.154000] eth1: no IPv6 routers present
[ 716.413000] ADDRCONF(
[ 718.966000] ADDRCONF(
[ 729.086000] eth1: no IPv6 routers present
[ 784.408000] ADDRCONF(
[ 786.817000] ADDRCONF(
[ 797.428000] eth1: no IPv6 routers present
[ 890.894000] ADDRCONF(
[ 893.429000] ADDRCONF(
[ 903.782000] eth1: no IPv6 routers present
[ 929.392000] eth1: no IPv6 routers present
[ 7536.349000] usb 2-1: new full speed USB device using uhci_hcd and address 2
[ 7536.510000] usb 2-1: configuration #1 chosen from 1 choice
[ 7536.775000] usbcore: registered new interface driver usbserial
[ 7536.776000] drivers/
[ 7536.814000] usbcore: registered new interface driver usbserial_generic
[ 7536.814000] drivers/
[ 7536.821000] drivers/
[ 7536.821000] drivers/
[ 7536.821000] drivers/
[ 7536.825000] visor 2-1:1.0: Handspring Visor / Palm OS converter detected
[ 7536.825000] usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB0
[ 7536.826000] usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB1
[ 7536.826000] usbcore: registered new interface driver visor
[ 7536.826000] drivers/
[ 7540.644000] usb 2-1: USB disconnect, address 2
[ 7540.644000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[ 7540.644000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[ 7540.644000] visor 2-1:1.0: device disconnected
[ 7565.978000] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 7566.136000] usb 2-1: configuration #1 chosen from 1 choice
[ 7566.142000] visor 2-1:1.0: Handspring Visor / Palm OS converter detected
[ 7566.143000] usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB0
[ 7566.143000] usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB1
[ 7566.708000] visor 2-1:1.0: device disconnected
[ 7566.711000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[ 7566.711000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[ 7575.026000] usb 2-1: USB disconnect, address 3
[ 7582.890000] usb 2-1: new full speed USB device using uhci_hcd and address 4
[ 7583.051000] usb 2-1: configuration #1 chosen from 1 choice
[ 7583.057000] visor 2-1:1.0: Handspring Visor / Palm OS converter detected
[ 7583.057000] usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB0
[ 7583.057000] usb 2-1: Handspring Visor / Palm OS converter now attached to ttyUSB1
[ 7594.936000] usb 2-1: USB disconnect, address 4
[ 7594.937000] visor ttyUSB0: Handspring Visor / Palm OS converter now disconnected from ttyUSB0
[ 7594.937000] visor ttyUSB1: Handspring Visor / Palm OS converter now disconnected from ttyUSB1
[ 7594.937000] visor 2-1:1.0: device disconnected
[21152.188000] TKIP: ICV error detected: STA=00:
[21170.131000] TKIP: ICV error detected: STA=00:
[21194.125000] TKIP: ICV error detected: STA=00:
[21245.348000] TKIP: ICV error detected: STA=00:
[23397.590000] TKIP: ICV error detected: STA=00:
[23398.495000] TKIP: ICV error detected: STA=00:
[24812.907000] usb 1-2: USB disconnect, address 2
[24815.073000] usb 2-1: new low speed USB device using uhci_hcd and address 5
[24815.236000] usb 2-1: configuration #1 chosen from 1 choice
[24815.252000] input: Logitech Optical USB Mouse as /class/input/input9
[24815.252000] input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-1
[28304.722000] TKIP: ICV error detected: STA=00:
[28909.396000] TKIP: ICV error detected: STA=00:
[33484.646000] ADDRCONF(
[33495.997000] ACPI: PCI interrupt for device 0000:0a:08.0 disabled
[33496.210000] ACPI: PCI interrupt for device 0000:06:00.0 disabled
[33498.322000] Disabling non-boot CPUs ...
[33498.328000] Breaking affinity for irq 8
[33498.330000] CPU 1 is now offline
[33498.330000] SMP alternatives: switching to UP code
[33498.332000] CPU1 is down
[33498.332000] Stopping tasks ... done.
[33498.637000] Suspending console(s)
[33498.690000] sonypi command failed at drivers/
[33498.729000] sonypi command failed at drivers/
[33503.656000] usbdev5.2_ep82: PM: suspend 0->2, parent 5-8:1.0 already 2
[33503.656000] usbdev5.2_ep81: PM: suspend 0->2, parent 5-8:1.0 already 2
[33503.656000] usb 5-8:1.0: PM: suspend 2->2, parent 5-8 already 2
[33503.656000] usbdev5.2_ep00: PM: suspend 0->2, parent 5-8 already 2
[33503.656000] usb 5-8: PM: suspend 2->2, parent usb5 already 2
[33503.656000] usbdev5.1_ep81: PM: suspend 0->2, parent 5-0:1.0 already 2
[33503.656000] hub 5-0:1.0: PM: suspend 2->2, parent usb5 already 2
[33503.656000] usbdev5.1_ep00: PM: suspend 0->2, parent usb5 already 2
[33503.656000] usbdev4.1_ep81: PM: suspend 0->2, parent 4-0:1.0 already 2
[33503.656000] hub 4-0:1.0: PM: suspend 2->2, parent usb4 already 2
[33503.656000] usbdev4.1_ep00: PM: suspend 0->2, parent usb4 already 2
[33503.656000] usbdev3.1_ep81: PM: suspend 0->2, parent 3-0:1.0 already 2
[33503.656000] hub 3-0:1.0: PM: suspend 2->2, parent usb3 already 2
[33503.656000] usbdev3.1_ep00: PM: suspend 0->2, parent usb3 already 2
[33503.656000] usbdev2.1_ep81: PM: suspend 0->2, parent 2-0:1.0 already 2
[33503.656000] hub 2-0:1.0: PM: suspend 2->2, parent usb2 already 2
[33503.656000] usbdev2.1_ep00: PM: suspend 0->2, parent usb2 already 2
[33503.656000] usbdev1.1_ep81: PM: suspend 0->2, parent 1-0:1.0 already 2
[33503.656000] hub 1-0:1.0: PM: suspend 2->2, parent usb1 already 2
[33503.656000] usbdev1.1_ep00: PM: suspend 0->2, parent usb1 already 2
[33504.171000] ACPI: PCI interrupt for device 0000:0a:03.2 disabled
[33504.171000] ohci1394 does not fully support suspend and resume yet
[33504.183000] NVRM: RmPowerManagement: 3
[33504.702000] ACPI: PCI interrupt for device 0000:00:1f.2 disabled
[33504.713000] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[33504.724000] ACPI: PCI interrupt for device 0000:00:1d.3 disabled
[33504.724000] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[33504.724000] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[33504.724000] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[33504.727000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[33504.738000] Back to C!
[33799.740000] PM: Writing back config space on device 0000:00:01.0 at offset f (was 100, writing 80107)
[33799.740000] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0)
[33799.740000] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing bff1b001)
[33799.740000] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing d1f0d000)
[33799.740000] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 200000f0)
[33799.740000] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100)
[33799.740000] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10010)
[33799.740000] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100407)
[33799.740000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[33799.751000] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
[33799.751000] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100006, writing 100002)
[33799.751000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
[33799.751000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[33799.781000] PM: Writing back config space on device 0000:00:1c.0 at offset f (was 40100, writing 40103)
[33799.781000] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing c1f1c001)
[33799.781000] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing c9f0c800)
[33799.781000] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020)
[33799.781000] PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 0, writing 30200)
[33799.781000] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010)
[33799.781000] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100407)
[33799.781000] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[33799.781000] PM: Writing back config space on device 0000:00:1c.1 at offset f (was 40200, writing 40207)
[33799.781000] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing c3f1c201)
[33799.781000] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing cbf0ca00)
[33799.781000] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 3030)
[33799.781000] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010)
[33799.781000] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100407)
[33799.781000] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[33799.781000] PM: Writing back config space on device 0000:00:1c.2 at offset f (was 40300, writing 4030b)
[33799.782000] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing c5f1c401)
[33799.782000] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing cdf0cc00)
[33799.782000] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 4040)
[33799.782000] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810010)
[33799.782000] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100407)
[33799.782000] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[33799.782000] PM: Writing back config space on device 0000:00:1c.3 at offset f (was 40400, writing 4040a)
[33799.782000] PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing c7f1c601)
[33799.782000] PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing cff0ce00)
[33799.782000] PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 20000000, writing 5050)
[33799.782000] PM: Writing back config space on device 0000:00:1c.3 at offset 6 (was 0, writing 90800)
[33799.782000] PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
[33799.782000] PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100407)
[33799.782000] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[33799.782000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[33799.782000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[33799.782000] usb usb1: root hub lost power or was reset
[33799.782000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17
[33799.782000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[33799.782000] usb usb2: root hub lost power or was reset
[33799.782000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[33799.782000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[33799.782000] usb usb3: root hub lost power or was reset
[33799.782000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
[33799.782000] PCI: Setting l
Changed in linux-source-2.6.20: | |
assignee: | nobody → timg-tpi |
Changed in linux-source-2.6.20: | |
assignee: | timg-tpi → ubuntu-kernel-acpi |
importance: | Undecided → Low |
status: | Needs Info → Confirmed |
Changed in linux: | |
assignee: | ubuntu-kernel-acpi → ubuntu-kernel-team |
importance: | Undecided → Medium |
status: | New → Triaged |
Changed in linux-source-2.6.20 (Ubuntu): | |
assignee: | Registry Administrators (registry) → nobody |
Changed in linux-source-2.6.22 (Ubuntu): | |
assignee: | Registry Administrators (registry) → nobody |
Please reproduce this under 2.6.20-5.7.