Another slow boot in 7.10 (Gutsy)
Affects | Status | Importance | Assigned to | Milestone | |
---|---|---|---|---|---|
linux (Ubuntu) |
Won't Fix
|
Undecided
|
Unassigned | ||
linux-source-2.6.22 (Ubuntu) |
Won't Fix
|
Undecided
|
Unassigned |
Bug Description
On upgrading from 7.04 to 7.10, I now experience a very slow boot time (about 3 to 4 minutes).
On boot up, the splash screen appears as normal with the progress bar.
The progress bar freezes very early on (after about 1 to 3 filled in bars - varies).
The bar stays in this position for 3 to 4 minutes, before continuing on to the end to complete the boot.
Have seen other bugs with similar problems, but none of the solutions made any difference, or didn't seem applicable.
I have been using ubuntu for about a year now, and this is the first time I've reported a bug.
If there's more info needed, let me know. I have included dmesg.log and lspci-vvnn.log.
uname -a:
Linux kenny-desktop 2.6.22-14-386 #1 Sun Oct 14 22:36:54 GMT 2007 i686 GNU/Linux
sudo lspci -vvnn > lspci-vvnn.log:
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge [8086:7190] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 64
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x2
00:01.0 PCI bridge [0604]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge [8086:7191] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: f5000000-f5ffffff
Prefetchable memory behind bridge: fc000000-fdffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+
00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
Region 4: I/O ports at 1440 [size=16]
00:07.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4 USB [8086:7112] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1400 [size=32]
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9
00:0e.0 Multimedia audio controller [0401]: Creative Labs SB Live! EMU10k1 [1102:0002] (rev 05)
Subsystem: Creative Labs CT4780 SBLive! Value [1102:8022]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at 1420 [size=32]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0e.1 Input device controller [0980]: Creative Labs SB Live! Game Port [1102:7002] (rev 05)
Subsystem: Creative Labs Gameport Joystick [1102:0020]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 0: I/O ports at 1450 [size=8]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0f.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8139/
Subsystem: Netgear Unknown device [1385:f31d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1000 [size=256]
Region 1: Memory at f4002000 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.0 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: Belkin Root Hub [1799:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:10.1 USB Controller [0c03]: NEC Corporation USB [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: Belkin Root Hub [1799:0001]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (250ns min, 10500ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at f4001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME+
00:10.2 USB Controller [0c03]: NEC Corporation USB 2.0 [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: Belkin Root Hub [1799:0002]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 132 (4000ns min, 8500ns max), Cache Line Size: 32 bytes
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f4002400 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV5 [RIVA TNT2/TNT2 Pro] [10de:0028] (rev 11) (prog-if 00 [VGA])
Subsystem: Diamond Multimedia Systems RIVA TNT2/TNT2 Pro [1092:5a00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 248 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Capabilities: [60] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [44] AGP version 2.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x2
dmesg > dmesg.log:
[ 0.000000] Linux version 2.6.22-14-386 (buildd@palmer) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 Sun Oct 14 22:36:54 GMT 2007 (Ubuntu 2.6.22-14.46-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e6c00 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000040fd800 (usable)
[ 0.000000] BIOS-e820: 00000000040fd800 - 00000000040ff800 (ACPI data)
[ 0.000000] BIOS-e820: 00000000040ff800 - 00000000040ffc00 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000040ffc00 - 0000000018000000 (usable)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 384MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 98304) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 98304
[ 0.000000] HighMem 98304 -> 98304
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 98304
[ 0.000000] On node 0 totalpages: 98304
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 736 pages used for memmap
[ 0.000000] Normal zone: 93472 pages, LIFO batch:31
[ 0.000000] HighMem zone: 0 pages used for memmap
[ 0.000000] DMI 2.1 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6BB0 checksum 0
[ 0.000000] ACPI: RSDP 000F6BB0, 0014 (r0 PTLTD )
[ 0.000000] ACPI: RSDT 040FDBCB, 0028 (r1 PTLTD RSDT 1 PTL 1000000)
[ 0.000000] ACPI: FACP 040FF78C, 0074 (r1 DELL KUBLAI 20001013 PTL F4240)
[ 0.000000] ACPI: DSDT 040FDBF3, 1B99 (r1 Intel S2440BX 1 MSFT 1000004)
[ 0.000000] ACPI: FACS 040FFBC0, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 18000000:e7f80000)
[ 0.000000] Built 1 zonelists. Total pages: 97536
[ 0.000000] Kernel command line: root=UUID=
[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[ 0.000000] mapped APIC to ffffd000 (01302000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes)
[ 0.000000] Detected 598.665 MHz processor.
[ 52.676394] Console: colour dummy device 80x25
[ 52.677512] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 52.678727] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 52.727451] Memory: 378772k/393216k available (1929k kernel code, 13788k reserved, 877k data, 348k init, 0k highmem)
[ 52.727486] virtual kernel memory layout:
[ 52.727490] fixmap : 0xfffa8000 - 0xfffff000 ( 348 kB)
[ 52.727496] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 52.727501] vmalloc : 0xd8800000 - 0xff7fe000 ( 623 MB)
[ 52.727505] lowmem : 0xc0000000 - 0xd8000000 ( 384 MB)
[ 52.727510] .init : 0xc03c0000 - 0xc0417000 ( 348 kB)
[ 52.727515] .data : 0xc02e25d5 - 0xc03bda04 ( 877 kB)
[ 52.727520] .text : 0xc0100000 - 0xc02e25d5 (1929 kB)
[ 52.727531] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 52.727679] SLUB: Genslabs=22, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
[ 52.807688] Calibrating delay using timer specific routine.. 1198.19 BogoMIPS (lpj=2396396)
[ 52.807773] Security Framework v1.0.0 initialized
[ 52.807798] SELinux: Disabled at boot.
[ 52.807821] Mount-cache hash table entries: 512
[ 52.808139] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[ 52.808172] CPU: L1 I cache: 16K, L1 D cache: 16K
[ 52.808180] CPU: L2 cache: 512K
[ 52.808189] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[ 52.808221] Compat vDSO mapped to ffffe000.
[ 52.808256] CPU: Intel Pentium III (Katmai) stepping 03
[ 52.808273] Checking 'hlt' instruction... OK.
[ 52.825193] Early unpacking initramfs... done
[ 53.879714] ACPI: Core revision 20070126
[ 53.879910] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[ 53.882051] ACPI: setting ELCR to 0200 (from 0e00)
[ 53.883925] Booting paravirtualized kernel on bare hardware
[ 53.884061] Time: 20:27:52 Date: 10/03/107
[ 53.884148] NET: Registered protocol family 16
[ 53.884457] EISA bus registered
[ 53.884485] ACPI: bus type pci registered
[ 53.885023] PCI: PCI BIOS revision 2.10 entry at 0xfd993, last bus=1
[ 53.885032] PCI: Using configuration type 1
[ 53.885038] Setting up standard PCI resources
[ 53.892428] ACPI: EC: Look up EC in DSDT
[ 53.897468] ACPI: Interpreter enabled
[ 53.897478] ACPI: (supports S0 S1 S5)
[ 53.897524] ACPI: Using PIC for interrupt routing
[ 53.907573] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 53.907617] PCI: Probing PCI hardware (bus 00)
[ 53.908031] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 53.908037] * this clock source is slow. Consider trying other clock sources
[ 53.908092] PCI quirk: region 8000-803f claimed by PIIX4 ACPI
[ 53.908102] PCI quirk: region 7000-700f claimed by PIIX4 SMB
[ 53.908694] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 53.912286] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 53.912585] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 53.912880] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11 12)
[ 53.913173] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12)
[ 53.913523] ACPI: Power Resource [PFAN] (on)
[ 53.913569] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 53.913603] pnp: PnP ACPI init
[ 53.913631] ACPI: bus type pnp registered
[ 53.924321] pnp: PnP ACPI: found 11 devices
[ 53.924330] ACPI: ACPI bus type pnp unregistered
[ 53.924342] PnPBIOS: Disabled by ACPI PNP
[ 53.924510] PCI: Using ACPI for IRQ routing
[ 53.924522] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 53.927103] NET: Registered protocol family 8
[ 53.927111] NET: Registered protocol family 20
[ 53.927308] pnp: 00:01: ioport range 0x7000-0x700f has been reserved
[ 53.927321] pnp: 00:01: ioport range 0x8000-0x803f has been reserved
[ 53.927334] pnp: 00:01: iomem range 0xfff80000-
[ 53.927364] Time: tsc clocksource has been installed.
[ 53.958636] PCI: Failed to allocate mem resource #6:10000@fe000000 for 0000:01:00.0
[ 53.958658] PCI: Bridge: 0000:00:01.0
[ 53.958664] IO window: disabled.
[ 53.958674] MEM window: f5000000-f5ffffff
[ 53.958684] PREFETCH window: fc000000-fdffffff
[ 53.958733] NET: Registered protocol family 2
[ 53.995422] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 53.995586] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 53.996087] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 53.996329] TCP: Hash tables configured (established 16384 bind 16384)
[ 53.996338] TCP reno registered
[ 54.007715] checking if image is initramfs.
[ 54.929810] it is
[ 56.027859] Freeing initrd memory: 6742k freed
[ 56.028893] audit: initializing netlink socket (disabled)
[ 56.028937] audit(119412167
[ 56.038151] VFS: Disk quotas dquot_6.5.1
[ 56.038211] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 56.038585] io scheduler noop registered
[ 56.038595] io scheduler anticipatory registered
[ 56.038631] io scheduler deadline registered
[ 56.038725] io scheduler cfq registered (default)
[ 56.038754] Limiting direct PCI/PCI transfers.
[ 56.038834] Boot video device is 0000:01:00.0
[ 56.039357] isapnp: Scanning for PnP cards...
[ 56.152295] isapnp: Card 'Rockwell 56K ACF II Fax+Data+Voice Modem'
[ 56.152306] isapnp: 1 Plug & Play card detected total
[ 56.274498] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 56.274772] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 56.276987] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 56.279757] pnp: Device 01:01.00 activated.
[ 56.280062] 01:01.00: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 56.282826] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 56.283323] input: Macintosh mouse button emulation as /class/input/input0
[ 56.283619] PNP: PS/2 Controller [PNP0303:
[ 56.286470] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 56.286486] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 56.287183] mice: PS/2 mouse device common for all mice
[ 56.287585] EISA: Probing bus 0 at eisa.0
[ 56.287607] Cannot allocate resource for EISA slot 1
[ 56.287644] Cannot allocate resource for EISA slot 7
[ 56.287652] Cannot allocate resource for EISA slot 8
[ 56.287659] EISA: Detected 0 cards.
[ 56.287968] TCP cubic registered
[ 56.288025] NET: Registered protocol family 1
[ 56.288107] Using IPI Shortcut mode
[ 56.288585] Magic number: 15:303:497
[ 56.290121] Freeing unused kernel memory: 348k freed
[ 56.354645] input: AT Translated Set 2 keyboard as /class/input/input1
[ 58.090063] fuse init (API version 7.8)
[ 58.112739] Capability LSM initialized
[ 58.128223] ACPI: Fan [FAN1] (on)
[ 58.149200] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 59.874374] SCSI subsystem initialized
[ 59.916648] libata version 2.21 loaded.
[ 59.938113] ata_piix 0000:00:07.1: version 2.11
[ 59.938625] scsi0 : ata_piix
[ 59.938776] scsi1 : ata_piix
[ 59.938867] ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011440 irq 14
[ 59.938881] ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011448 irq 15
[ 59.981004] usbcore: registered new interface driver usbfs
[ 59.981083] usbcore: registered new interface driver hub
[ 59.981174] usbcore: registered new device driver usb
[ 59.986515] USB Universal Host Controller Interface driver v3.0
[ 60.163722] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 60.241014] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[ 60.670228] Floppy drive(s): fd0 is 1.44M
[ 60.706912] FDC 0 is a post-1991 82077
[ 8.084000] Marking TSC unstable due to: possible TSC halt in C2.
[ 8.088000] Time: acpi_pm clocksource has been installed.
[ 9.516000] ata1.00: ATA-6: ST380011A, 8.01, max UDMA/100
[ 9.516000] ata1.00: 156301488 sectors, multi 16: LBA48
[ 9.520000] ata1.01: ATA-4: WDC AC313600D, J7JOA30K, max UDMA/66
[ 9.520000] ata1.01: 26712000 sectors, multi 16: LBA
[ 9.540000] ata1.00: configured for UDMA/33
[ 9.564000] ata1.01: configured for UDMA/33
[ 10.048000] ata2.00: ATAPI: YAMAHA CRW8424E, 1.0e, max MWDMA2
[ 10.048000] ata2.01: ATAPI: TOSHIBA DVD-ROM SD-M1212, 1R14, max UDMA/33
[ 10.220000] ata2.00: configured for MWDMA2
[ 10.392000] ata2.01: configured for UDMA/33
[ 10.392000] scsi 0:0:0:0: Direct-Access ATA ST380011A 8.01 PQ: 0 ANSI: 5
[ 10.392000] scsi 0:0:1:0: Direct-Access ATA WDC AC313600D J7JO PQ: 0 ANSI: 5
[ 10.396000] scsi 1:0:0:0: CD-ROM YAMAHA CRW8424E 1.0e PQ: 0 ANSI: 5
[ 10.400000] scsi 1:0:1:0: CD-ROM TOSHIBA DVD-ROM SD-M1212 1R14 PQ: 0 ANSI: 5
[ 10.400000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[ 10.400000] PCI: setting IRQ 9 as level-triggered
[ 10.400000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 10.400000] uhci_hcd 0000:00:07.2: UHCI Host Controller
[ 10.400000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[ 10.400000] uhci_hcd 0000:00:07.2: irq 9, io base 0x00001400
[ 10.404000] usb usb1: configuration #1 chosen from 1 choice
[ 10.404000] hub 1-0:1.0: USB hub found
[ 10.404000] hub 1-0:1.0: 2 ports detected
[ 10.456000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 10.456000] sd 0:0:0:0: [sda] Write Protect is off
[ 10.456000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.456000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.456000] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[ 10.456000] sd 0:0:0:0: [sda] Write Protect is off
[ 10.456000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 10.456000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.456000] sda: sda1 sda2 sda3 <<6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[ 10.508000] ohci_hcd 0000:00:10.0: OHCI Host Controller
[ 10.508000] ohci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 10.508000] ohci_hcd 0000:00:10.0: irq 9, io mem 0xf4000000
[ 10.512000] sda5 >
[ 10.512000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 10.520000] sd 0:0:1:0: [sdb] 26712000 512-byte hardware sectors (13677 MB)
[ 10.524000] sd 0:0:1:0: [sdb] Write Protect is off
[ 10.524000] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 10.532000] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.540000] sd 0:0:1:0: [sdb] 26712000 512-byte hardware sectors (13677 MB)
[ 10.544000] sd 0:0:1:0: [sdb] Write Protect is off
[ 10.544000] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
[ 10.548000] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 10.548000] sdb: sdb1 sdb2 <<6>usb usb2: configuration #1 chosen from 1 choice
[ 10.592000] hub 2-0:1.0: USB hub found
[ 10.592000] hub 2-0:1.0: 3 ports detected
[ 10.592000] sdb5 >
[ 10.592000] sd 0:0:1:0: [sdb] Attached SCSI disk
[ 10.612000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 10.612000] sd 0:0:1:0: Attached scsi generic sg1 type 0
[ 10.612000] ata2: DRQ=1 with device error, dev_stat 0x59
[ 10.612000] ata2.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
[ 10.612000] ata2.00: cmd a0/00:00:
[ 10.612000] res 51/20:03:
[ 10.612000] ata2: soft resetting port
[ 10.612000] sr 1:0:0:0: Attached scsi generic sg2 type 5
[ 10.612000] scsi 1:0:1:0: Attached scsi generic sg3 type 5
[ 10.696000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 10.696000] PCI: setting IRQ 11 as level-triggered
[ 10.696000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 10.696000] ohci_hcd 0000:00:10.1: OHCI Host Controller
[ 10.696000] ohci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
[ 10.696000] ohci_hcd 0000:00:10.1: irq 11, io mem 0xf4001000
[ 10.780000] usb usb3: configuration #1 chosen from 1 choice
[ 10.780000] hub 3-0:1.0: USB hub found
[ 10.780000] hub 3-0:1.0: 2 ports detected
[ 10.884000] 8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
[ 10.884000] 8139cp 0000:00:0f.0: Try the "8139too" driver instead.
[ 10.892000] 8139too Fast Ethernet driver 0.9.28
[ 10.892000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[ 10.892000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
[ 10.892000] eth0: RealTek RTL8139 at 0xd884a000, 00:14:6c:8e:79:6e, IRQ 9
[ 10.892000] eth0: Identified 8139 chip type 'RTL-8100B/8139D'
[ 10.892000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
[ 10.892000] PCI: setting IRQ 10 as level-triggered
[ 10.892000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 10.892000] ehci_hcd 0000:00:10.2: EHCI Host Controller
[ 10.892000] ehci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
[ 10.920000] ehci_hcd 0000:00:10.2: irq 10, io mem 0xf4002400
[ 10.920000] ehci_hcd 0000:00:10.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 10.920000] usb usb4: configuration #1 chosen from 1 choice
[ 10.920000] hub 4-0:1.0: USB hub found
[ 10.920000] hub 4-0:1.0: 5 ports detected
[ 11.400000] Attempting manual resume
[ 11.400000] swsusp: Resume From Partition 8:5
[ 11.400000] PM: Checking swsusp image.
[ 11.404000] PM: Resume from disk failed.
[ 11.496000] kjournald starting. Commit interval 5 seconds
[ 11.496000] EXT3-fs: mounted filesystem with ordered data mode.
[ 27.288000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 27.296000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 28.404000] Linux agpgart interface v0.102 (c) Dave Jones
[ 29.088000] gameport: EMU10K1 is pci0000:
[ 29.096000] agpgart: Detected an Intel 440BX Chipset.
[ 29.100000] agpgart: AGP aperture is 64M @ 0xf8000000
[ 29.224000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[ 29.924000] nvidia: module license 'NVIDIA' taints kernel.
[ 29.940000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[ 29.940000] NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-7185 Mon Apr 2 18:29:54 PDT 2007
[ 30.980000] input: ImPS/2 Generic Wheel Mouse as /class/input/input2
[ 31.064000] Real Time Clock Driver v1.12ac
[ 31.364000] input: PC Speaker as /class/input/input3
[ 32.176000] parport_pc 00:08: reported by Plug and Play ACPI
[ 32.176000] parport0: PC-style at 0x378, irq 7 [PCSPP,
[ 34.808000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
[ 41.108000] ata2.00: qc timeout (cmd 0xa1)
[ 41.108000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 41.108000] ata2.00: revalidation failed (errno=-5)
[ 41.108000] ata2: failed to recover some devices, retrying in 5 secs
[ 51.152000] ata2: port is slow to respond, please be patient (Status 0xd0)
[ 56.136000] ata2: device not ready (errno=-16), forcing hardreset
[ 56.136000] ata2: soft resetting port
[ 86.696000] ata2.00: qc timeout (cmd 0xa1)
[ 86.696000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 86.696000] ata2.00: revalidation failed (errno=-5)
[ 86.696000] ata2.00: limiting speed to MWDMA2:PIO3
[ 86.696000] ata2: failed to recover some devices, retrying in 5 secs
[ 96.740000] ata2: port is slow to respond, please be patient (Status 0xd0)
[ 101.724000] ata2: device not ready (errno=-16), forcing hardreset
[ 101.724000] ata2: soft resetting port
[ 132.284000] ata2.00: qc timeout (cmd 0xa1)
[ 132.284000] ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 132.284000] ata2.00: revalidation failed (errno=-5)
[ 132.284000] ata2.00: disabled
[ 132.284000] ata2: failed to recover some devices, retrying in 5 secs
[ 137.288000] ata2.01: failed to set xfermode (err_mask=0x40)
[ 137.288000] ata2: failed to recover some devices, retrying in 5 secs
[ 147.332000] ata2: port is slow to respond, please be patient (Status 0xd0)
[ 152.316000] ata2: device not ready (errno=-16), forcing hardreset
[ 152.316000] ata2: soft resetting port
[ 152.828000] ata2.01: configured for UDMA/33
[ 152.828000] ata2: EH complete
[ 152.828000] sr0: scsi3-mmc drive: 0x/0x caddy
[ 152.828000] Uniform CD-ROM driver Revision: 3.20
[ 152.828000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 152.836000] sr1: scsi3-mmc drive: 32x/32x cd/rw xa/form2 cdda tray
[ 152.840000] sr 1:0:1:0: Attached scsi CD-ROM sr1
[ 154.328000] lp0: using parport0 (interrupt-driven).
[ 154.440000] Adding 1132540k swap on /dev/sda5. Priority:-1 extents:1 across:1132540k
[ 154.792000] EXT3 FS on sda2, internal journal
[ 155.368000] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 156.896000] No dock devices found.
[ 157.296000] input: Power Button (FF) as /class/input/input4
[ 157.296000] ACPI: Power Button (FF) [PWRF]
[ 161.220000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[ 162.248000] ppdev: user-space parallel port driver
[ 163.148000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 163.148000] apm: overridden by ACPI.
[ 163.856000] agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
[ 163.856000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
[ 163.856000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
[ 164.232000] agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
[ 164.232000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
[ 164.232000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 2x mode
[ 165.220000] Capability LSM initialized
[ 165.724000] Bluetooth: Core ver 2.11
[ 165.724000] NET: Registered protocol family 31
[ 165.724000] Bluetooth: HCI device and connection manager initialized
[ 165.724000] Bluetooth: HCI socket layer initialized
[ 165.824000] Bluetooth: L2CAP ver 2.8
[ 165.824000] Bluetooth: L2CAP socket layer initialized
[ 166.028000] Bluetooth: RFCOMM socket layer initialized
[ 166.028000] Bluetooth: RFCOMM TTY layer initialized
[ 166.028000] Bluetooth: RFCOMM ver 1.8
[ 170.904000] NET: Registered protocol family 17
[ 175.044000] NET: Registered protocol family 10
[ 175.044000] lo: Disabled Privacy Extensions
[ 185.980000] eth0: no IPv6 routers present
Changed in linux: | |
status: | Incomplete → Confirmed |
Thank you for taking the time to report this bug and helping to make Ubuntu better. This bug did not have a package associated with it, which is important for ensuring that it gets looked at by the proper developers. You can learn more about finding the right package at https:/ /wiki.ubuntu. com/Bugs/ FindRightPackag e. I have classified this bug as a bug in linux-source-2.6.22