Comment 600 for bug 88746

Latest working kernel version:
Earliest failing kernel version:
Distribution: Debian/sid
Hardware Environment: ASUS M3A (AMD 770/SB600:http://www.asus.com/products.aspx?modelmenu=2&model=1934&l1=3&l2=149&l3=592&l4=0)
Software Environment:
Problem Description:
After using any usb2.0 device I have on my machine (only on linux, as on winxp there is no problem) for a few minutes I get this:
usb 6-5: reset high speed USB device using ehci_hcd and address 8
usb 6-5: device descriptor read/64, error -110
usb 6-5: device descriptor read/64, error -110
usb 6-5: reset high speed USB device using ehci_hcd and address 8
usb 6-5: device descriptor read/64, error -110
usb 6-5: device descriptor read/64, error -110
usb 6-5: reset high speed USB device using ehci_hcd and address 8
usb 6-5: device not accepting address 8, error -110
usb 6-5: reset high speed USB device using ehci_hcd and address 8
usb 6-5: device not accepting address 8, error -110
usb 6-5: USB disconnect, address 8
sd 4:0:0:0: Device offlined - not ready after error recovery
sd 4:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
end_request: I/O error, dev sdc, sector 530560
sd 4:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
end_request: I/O error, dev sdc, sector 530576
Buffer I/O error on device sdc1, logical block 138851
lost page write due to I/O error on sdc1
sd 4:0:0:0: [sdc] READ CAPACITY failed
sd 4:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
sd 4:0:0:0: [sdc] Sense not available.
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:0: [sdc] READ CAPACITY failed
sd 4:0:0:0: [sdc] Result: hostbyte=0x01 driverbyte=0x00
sd 4:0:0:0: [sdc] Sense not available.
sd 4:0:0:0: [sdc] Write Protect is off
sd 4:0:0:0: [sdc] Mode Sense: 00 00 00 00
sd 4:0:0:0: [sdc] Assuming drive cache: write through
sd 4:0:0:2: [sde] READ CAPACITY failed
sd 4:0:0:2: [sde] Result: hostbyte=0x01 driverbyte=0x00
sd 4:0:0:2: [sde] Sense not available.
sd 4:0:0:2: [sde] Write Protect is off
sd 4:0:0:2: [sde] Mode Sense: 00 00 00 00
sd 4:0:0:2: [sde] Assuming drive cache: write through
sd 4:0:0:1: [sdd] READ CAPACITY failed
sd 4:0:0:1: [sdd] Result: hostbyte=0x01 driverbyte=0x00
sd 4:0:0:1: [sdd] Sense not available.
sd 4:0:0:1: [sdd] Write Protect is off
sd 4:0:0:1: [sdd] Mode Sense: 00 00 00 00
sd 4:0:0:1: [sdd] Assuming drive cache: write through
Buffer I/O error on device sdc1, logical block 138851
lost page write due to I/O error on sdc1
sd 4:0:0:3: [sdf] READ CAPACITY failed
sd 4:0:0:3: [sdf] Result: hostbyte=0x01 driverbyte=0x00
sd 4:0:0:3: [sdf] Sense not available.
sd 4:0:0:3: [sdf] Write Protect is off
sd 4:0:0:3: [sdf] Mode Sense: 00 00 00 00
sd 4:0:0:3: [sdf] Assuming drive cache: write through
sd 4:0:0:1: [sdd] READ CAPACITY failed
sd 4:0:0:1: [sdd] Result: hostbyte=0x01 driverbyte=0x00
sd 4:0:0:1: [sdd] Sense not available.
sd 4:0:0:2: [sde] READ CAPACITY failed
sd 4:0:0:2: [sde] Result: hostbyte=0x01 driverbyte=0x00
sd 4:0:0:2: [sde] Sense not available.
...
And after that nothing get recognized by the ehci module.

Steps to reproduce: