Comment 1 for bug 117264

0:00.0 Host bridge: Intel Corporation 82830 830 Chipset Host Bridge (rev 02)
 Subsystem: IBM ThinkPad A/T/X Series
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
 Latency: 0
 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
 Capabilities: [40] Vendor Specific Information
 Capabilities: [a0] AGP version 2.0
  Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
  Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corporation 82830 830 Chipset AGP Bridge (rev 02) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 96
 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
 Memory behind bridge: c0100000-c01fffff
 Prefetchable memory behind bridge: e0000000-ebffffff
 Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:1d.0 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #1) (rev 01) (prog-if 00 [UHCI])
 Subsystem: IBM ThinkPad A/T/X Series
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 11
 Region 4: I/O ports at 1800 [size=32]

00:1d.1 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #2) (rev 01) (prog-if 00 [UHCI])
 Subsystem: IBM ThinkPad A/T/X Series
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin B routed to IRQ 11
 Region 4: I/O ports at 1820 [size=32]

00:1d.2 USB Controller: Intel Corporation 82801CA/CAM USB (Hub #3) (rev 01) (prog-if 00 [UHCI])
 Subsystem: IBM ThinkPad A/T/X Series
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin C routed to IRQ 11
 Region 4: I/O ports at 1840 [size=32]

00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 41) (prog-if 00 [Normal decode])
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
 I/O behind bridge: 00002000-00006fff
 Memory behind bridge: c0200000-cfffffff
 Prefetchable memory behind bridge: f0000000-f7ffffff
 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
 BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge: Intel Corporation 82801CAM ISA Bridge (LPC) (rev 01)
 Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0

00:1f.1 IDE interface: Intel Corporation 82801CAM IDE U100 (rev 01) (prog-if 8a [Master SecP PriP])
 Subsystem: IBM ThinkPad A/T/X Series
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin A routed to IRQ 11
 Region 0: I/O ports at 01f0 [size=8]
 Region 1: I/O ports at 03f4 [size=1]
 Region 2: I/O ports at 0170 [size=8]
 Region 3: I/O ports at 0374 [size=1]
 Region 4: I/O ports at 1860 [size=16]
 Region 5: Memory at 20000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus: Intel Corporation 82801CA/CAM SMBus Controller (rev 01)
 Subsystem: IBM ThinkPad A/T/X Series
 Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Interrupt: pin B routed to IRQ 11
 Region 4: I/O ports at 1880 [size=32]

00:1f.5 Multimedia audio controller: Intel Corporation 82801CA/CAM AC'97 Audio Controller (rev 01)
 Subsystem: IBM ThinkPad T23 (2647-4MG) or A30/A30p (2652/2653)
 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0
 Interrupt: pin B routed to IRQ 11
 Region 0: I/O ports at 1c00 [size=256]
 Region 1: I/O ports at 18c0 [size=64]

01:00.0 VGA compatible controller: S3 Inc. SuperSavage IX/C SDR (rev 05) (prog-if 00 [VGA])
 Subsystem: IBM ThinkPad T23 (2647-4MG)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 248 (1000ns min, 63750ns max), Cache Line Size: 1020 bytes
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at c0100000 (32-bit, non-prefetchable) [size=512K]
 Region 1: Memory at e8000000 (32-bit, prefetchable) [size=64M]
 Region 2: Memory at e4000000 (32-bit, prefetchable) [size=64M]
 Region 3: Memory at e0000000 (32-bit, prefetchable) [size=32M]
 [virtual] Expansion ROM at e2000000 [disabled] [size=64K]
 Capabilities: [dc] Power Management version 2
  Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
 Capabilities: [80] AGP version 2.0
  Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA- ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2,x4
  Command: RQ=32 ArqSz=0 Cal=0 SBA- AGP+ GART64- 64bit- FW- Rate=x1

02:00.0 CardBus bridge: Texas Instruments PCI1420
 Subsystem: IBM ThinkPad T23 (2647-4MG)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 168, Cache Line Size: 128 bytes
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at 50000000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
 Memory window 0: f0000000-f3fff000 (prefetchable)
 Memory window 1: c4000000-c7fff000
 I/O window 0: 00002000-000020ff
 I/O window 1: 00002400-000024ff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
 16-bit legacy interface ports at 0001

02:00.1 CardBus bridge: Texas Instruments PCI1420
 Subsystem: IBM ThinkPad T23 (2647-4MG)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 168, Cache Line Size: 128 bytes
 Interrupt: pin B routed to IRQ 11
 Region 0: Memory at 51000000 (32-bit, non-prefetchable) [size=4K]
 Bus: primary=02, secondary=07, subordinate=07, sec-latency=176
 Memory window 0: f4000000-f7fff000 (prefetchable)
 Memory window 1: c8000000-cbfff000
 I/O window 0: 00002800-000028ff
 I/O window 1: 00002c00-00002cff
 BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
 16-bit legacy interface ports at 0001

02:02.0 Communication controller: Agere Systems WinModem 56k (rev 01)
 Subsystem: AMBIT Microsystem Corp. IBM ThinkPad T23 (2647-4MG)
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 0 (63000ns min, 3500ns max)
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at c0201000 (32-bit, non-prefetchable) [size=256]
 Region 1: I/O ports at 6440 [size=8]
 Region 2: I/O ports at 6000 [size=256]
 Capabilities: [f8] Power Management version 2
  Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=0 PME-

02:08.0 Ethernet controller: Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller (rev 41)
 Subsystem: IBM ThinkPad A/T/X Series
 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
 Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at c0200000 (32-bit, non-prefetchable) [size=4K]
 Region 1: I/O ports at 6400 [size=64]
 Capabilities: [dc] Power Management version 2
  Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  Status: D0 PME-Enable- DSel=0 DScale=2 PME-

03:00.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
 Subsystem: Linksys WPC54G-EU version 3 [Wireless-G Notebook Adapter]
 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
 Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
 Latency: 64
 Interrupt: pin A routed to IRQ 11
 Region 0: Memory at c4000000 (32-bit, non-prefetchable) [size=8K]